Inicio Audio Amplificadores de audio Amplificadores para altavoces
Inicio
Audio
Amplificadores de audio
Amplificadores para altavoces
NUEVO

TAS2572

ACTIVO

Amplificador inteligente de entrada digital de 6.6 W con detección de I/V y refuerzo integrado de 13

Haga su pedido ahora
Hoja de datos

TAS2572

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Digital Input Architecture Class-D Boosted, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 13.2 Power stage supply (min) (V) 5.5 Load (min) (Ω) 4 Output power (W) 6.5 SNR (dB) 112.5 THD + N at 1 kHz (%) 0.0035 Iq (typ) (mA) 2.3 Control interface I2C Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 115 Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D Boosted, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 13.2 Power stage supply (min) (V) 5.5 Load (min) (Ω) 4 Output power (W) 6.5 SNR (dB) 112.5 THD + N at 1 kHz (%) 0.0035 Iq (typ) (mA) 2.3 Control interface I2C Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 115 Operating temperature range (°C) -40 to 85
DSBGA (YCG) 36 4.9729 mm² 2.23 x 2.23
  • Powerful class-D amplifier
    • 6.6 W 1% THD+N
    • 13V boost with 4.0A max current limit
  • Best in class efficiency
    • Upto 90% efficiency at system level
    • 4.8mW idle channel power
    • Integrated Y-bridge
    • Advanced 33mV step size class-H boost
  • High performance audio channel
    • 7µV A-wt. idle channel noise
    • 109dB Dynamic Range
    • -90dB THDN
    • Low EMI performance
  • Advanced integrated features
    • Integrated Speaker IV sense
    • Signal detection high efficiency modes
    • High accuracy voltage monitor & temp sensor
    • Programmable battery input current limit
  • Ease of use features
    • 1cell, 2cell and 3cell Li-ion battery support
    • Clock based power up/down
    • Auto clock rate detection: 16kHz to 192kHz
    • Integrated ultrasonic tone generator
    • External 14V PVDD supply support
    • MCLK free operation
    • Thermal and over current protection
    • Programmable drive strength IO buffers
  • Power Supplies and user interface
    • VBAT: 2.5 V to 5.5 V
    • VDD: 1.65 V to 1.95 V
    • IOVDD: 1.2V or 1.8V
    • I 2S/TDM: 8 channels
    • I 2C: 4 selectable addresses
  • WCSP package
  • Powerful class-D amplifier
    • 6.6 W 1% THD+N
    • 13V boost with 4.0A max current limit
  • Best in class efficiency
    • Upto 90% efficiency at system level
    • 4.8mW idle channel power
    • Integrated Y-bridge
    • Advanced 33mV step size class-H boost
  • High performance audio channel
    • 7µV A-wt. idle channel noise
    • 109dB Dynamic Range
    • -90dB THDN
    • Low EMI performance
  • Advanced integrated features
    • Integrated Speaker IV sense
    • Signal detection high efficiency modes
    • High accuracy voltage monitor & temp sensor
    • Programmable battery input current limit
  • Ease of use features
    • 1cell, 2cell and 3cell Li-ion battery support
    • Clock based power up/down
    • Auto clock rate detection: 16kHz to 192kHz
    • Integrated ultrasonic tone generator
    • External 14V PVDD supply support
    • MCLK free operation
    • Thermal and over current protection
    • Programmable drive strength IO buffers
  • Power Supplies and user interface
    • VBAT: 2.5 V to 5.5 V
    • VDD: 1.65 V to 1.95 V
    • IOVDD: 1.2V or 1.8V
    • I 2S/TDM: 8 channels
    • I 2C: 4 selectable addresses
  • WCSP package

The TAS2572 is a digital input Class-D audio amplifier with an integrated Boost for higher power delivery in battery-operated systems. The device has integrated speaker voltage and current sense (IV-Sense) for real-time monitoring of the loudspeakers. IV-sense data can be used to run speaker protection algorithms on a host DSP to enable high output SPL while keeping speakers in a safe operating region.

The device is optimized for delivering the best battery life for real use cases of Music playback and Voice calls. Advanced efficiency optimization features like Class-H , Y-bridge and algorithms enable the device to produce best-in-class efficiency across all power regions of operation. The Class-D amplifier is capable of delivering 6.6 W output power using the integrated Class-H 13 V Boost.

A battery tracking peak voltage limiter and a battery voltage monitor ADC enables advanced battery monitoring algorithms on the host processor to manage peak output power delivery while avoiding any audio distortion when battery capacity is depleting.

Up to four devices can share a common bus via I 2S/TDM + I 2C interfaces.

The TAS2572 is a digital input Class-D audio amplifier with an integrated Boost for higher power delivery in battery-operated systems. The device has integrated speaker voltage and current sense (IV-Sense) for real-time monitoring of the loudspeakers. IV-sense data can be used to run speaker protection algorithms on a host DSP to enable high output SPL while keeping speakers in a safe operating region.

The device is optimized for delivering the best battery life for real use cases of Music playback and Voice calls. Advanced efficiency optimization features like Class-H , Y-bridge and algorithms enable the device to produce best-in-class efficiency across all power regions of operation. The Class-D amplifier is capable of delivering 6.6 W output power using the integrated Class-H 13 V Boost.

A battery tracking peak voltage limiter and a battery voltage monitor ADC enables advanced battery monitoring algorithms on the host processor to manage peak output power delivery while avoiding any audio distortion when battery capacity is depleting.

Up to four devices can share a common bus via I 2S/TDM + I 2C interfaces.

open-in-new Buscar otro/a Amplificadores para altavoces
Descargar Ver vídeo con transcripción Video
Solicitar más información

La ficha técnica completa y otros recursos están disponibles. Solicitar ahora

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TAS25726.6 WDigital Input smart amp with I/V sense and integrated13 VClass-H Boost datasheet PDF | HTML 29 nov 2022
Certificate TAS2572EVM EU RoHS Declaration of Conformity (DoC) 24 abr 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Software de aplicación y estructura

PUREPATHCONSOLE — Conjunto de aplicaciones de desarrollo gráfico de consola PurePath™ para diseño y desarrollo de sist

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
Solicitar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
DSBGA (YCG) 36 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos