TAS5630

NO RECOMENDADO PARA NUEVOS DISEÑOS

Amplificador estéreo con entrada analógica de 300 W estéreo, de clase D, con retroalimentación integ

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 300W STEREO / 600W MONO PurePath HDTM ANALOG-INPUT POWER STAGE datasheet (Rev. B) (Inglés)

TAS5630

NO RECOMENDADO PARA NUEVOS DISEÑOS

Hoja de datos

Haga su pedido ahora

Detalles del producto

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

52.5

Power stage supply (min) (V)

25

Load (min) (Ω)

4

Iq (typ) (mA)

11.5

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

10.8

Analog supply voltage (max) (V)

13.2

PSRR (dB)

80

Operating temperature range (°C)

0 to 70

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

52.5

Power stage supply (min) (V)

25

Load (min) (Ω)

4

Iq (typ) (mA)

11.5

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

10.8

Analog supply voltage (max) (V)

13.2

PSRR (dB)

80

Operating temperature range (°C)

0 to 70

HTQFP (PHD)

64

256 mm² 16 x 16

PurePath™ HD Enabled Integrated Feedback Provides:
- Signal Bandwidth up to 80 kHz for High-Frequency Content From HD Sources
- Ultralow 0.03% THD at 1 W into 4
- Flat THD at all Frequencies for Natural Sound
- 80-dB PSRR (BTL, No Input Signal)
- >100-dB (A-weighted) SNR
- Click- and Pop-Free Start-Up
Multiple Configurations Possible on the Same PCB With Stuffing Options:
- Mono Parallel Bridge-Tied Load (PBTL)
- Stereo Bridge-Tied Load (BTL)
- 2.1 Single-Ended Stereo Pair and Bridge-Tied Load Subwoofer
- Quad Single-Ended Outputs
Total Output Power at 10% THD+N
- 600 W in Mono PBTL Configuration
- 300 W per Channel in Stereo BTL Configuration
- 145 W per Channel in Quad Single-Ended Configuration
High-Efficiency Power Stage (>88%) With 60-m Output MOSFETs
Two Thermally Enhanced Package Options:
- PHD (64-Pin QFP)
- DKD (44-Pin PSOP3)
Self-Protection Design (Including Undervoltage, Overtemperature,
Clipping, and Short-Circuit Protection) With Error Reporting
EMI Compliant When Used With Recommended System Design
APPLICATIONS
- Mini Combo System
- AV Receivers
- DVD Receivers
- Active Speakers

⁽¹⁾ Achievable output power levels are dependent on the thermal configuration of the target application. A high-performance thermal interface material between the exposed package heat slug and the heat sink should be used to achieve high output power levels.
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

PurePath™ HD Enabled Integrated Feedback Provides:
- Signal Bandwidth up to 80 kHz for High-Frequency Content From HD Sources
- Ultralow 0.03% THD at 1 W into 4
- Flat THD at all Frequencies for Natural Sound
- 80-dB PSRR (BTL, No Input Signal)
- >100-dB (A-weighted) SNR
- Click- and Pop-Free Start-Up
Multiple Configurations Possible on the Same PCB With Stuffing Options:
- Mono Parallel Bridge-Tied Load (PBTL)
- Stereo Bridge-Tied Load (BTL)
- 2.1 Single-Ended Stereo Pair and Bridge-Tied Load Subwoofer
- Quad Single-Ended Outputs
Total Output Power at 10% THD+N
- 600 W in Mono PBTL Configuration
- 300 W per Channel in Stereo BTL Configuration
- 145 W per Channel in Quad Single-Ended Configuration
High-Efficiency Power Stage (>88%) With 60-m Output MOSFETs
Two Thermally Enhanced Package Options:
- PHD (64-Pin QFP)
- DKD (44-Pin PSOP3)
Self-Protection Design (Including Undervoltage, Overtemperature,
Clipping, and Short-Circuit Protection) With Error Reporting
EMI Compliant When Used With Recommended System Design
APPLICATIONS
- Mini Combo System
- AV Receivers
- DVD Receivers
- Active Speakers

⁽¹⁾ Achievable output power levels are dependent on the thermal configuration of the target application. A high-performance thermal interface material between the exposed package heat slug and the heat sink should be used to achieve high output power levels.
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The TAS5630 is a high-performance analog-input class-D amplifier with integrated closed-loop feedback technology (known as PurePath HD technology) with the ability to drive up to 300 W⁽¹⁾ Achievable output power levels are dependent on the thermal configuration of the target application. A high-performance thermal interface material between the exposed package heat slug and the heat sink should be used to achieve high output power levels. stereo into 4- to 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Unlike traditional class-D amplifiers, the distortion curve only increases once the output levels move into clipping.

PurePath HD technology enables lower idle losses, making the device even more efficient. Coupled with TI’s class-G power-supply reference design for TAS563x, industry-leading levels of efficiency can be achieved.

The TAS5630 is a high-performance analog-input class-D amplifier with integrated closed-loop feedback technology (known as PurePath HD technology) with the ability to drive up to 300 W⁽¹⁾ Achievable output power levels are dependent on the thermal configuration of the target application. A high-performance thermal interface material between the exposed package heat slug and the heat sink should be used to achieve high output power levels. stereo into 4- to 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Unlike traditional class-D amplifiers, the distortion curve only increases once the output levels move into clipping.

PurePath HD technology enables lower idle losses, making the device even more efficient. Coupled with TI’s class-G power-supply reference design for TAS563x, industry-leading levels of efficiency can be achieved.

open-in-new

Buscar otro/a Amplificadores para altavoces

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 5

	Tipo	Título	Fecha
*	Data sheet	300W STEREO / 600W MONO PurePath HDTM ANALOG-INPUT POWER STAGE datasheet (Rev. B)	18 feb 2010
	User guide	A 600-W Input, Isolated PFC Power Supply for AVR Amplifiers. (Rev. C)	20 sep 2012
	EVM User's guide	TAS5615DKD2EVM User's Guide (Rev. A)	05 may 2010
	EVM User's guide	TAS5630DKD2EVM User's Guide (Rev. A)	05 may 2010
	EVM User's guide	TAS5630PHD2EVM User's Guide (Rev. A)	05 may 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Paquete	Pasadores	Descargar
HTQFP (PHD)	64	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TAS5630

Amplificador estéreo con entrada analógica de 300 W estéreo, de clase D, con retroalimentación integ

TAS5630

Detalles del producto

Documentación técnica

Diseño y desarrollo

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos