TAS5706

ACTIVO

Amplificador de potencia de audio I2S de circuito cerrado estéreo de 20 W con EQ de altavoz y DRC

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat 20W-Stereo Digital Audio Power Amplifier With EQ and DRC datasheet (Rev. B) (Inglés)

TAS5706

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Load (min) (Ω)

4

Sampling rate (max) (kHz)

192

Operating temperature range (°C)

0 to 85

Rating

Catalog

Load (min) (Ω)

4

Sampling rate (max) (kHz)

192

Operating temperature range (°C)

0 to 85

HTQFP (PAP)

64

144 mm² 12 x 12

Audio Input/Output
- 20-W into an 8-Ω Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
- Supports Multiple Output Configurations:
  - 2-Ch Bridged Outputs (20 W × 2)
  - 4-Ch Single-Ended Outputs (10 W × 4)
  - 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate Sound
  With Improved Bass Response
- Constant Output Power Over Variation in Supply
Wide PVCC Range From (10 V to 26 V)
- No Separate Supply Required for Gate Drive
Supports 32-kHz–192-kHz Sample Rates (LJ/RJ/I²S)
Headphone PWM Outputs
Subwoofer PWM Outputs
AM Interference Avoidance Support
Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to
  –100-dB Range—Soft Mute (50% Duty Cycle)
- Programmable Dynamic Range Control
- 16 Programmable Biquads for Speaker Equalization
- Adaptive Biquad Coefficients for EQ and DRC Filters
- Programmable Input and Output Mixers
- Loudness Compensation for Subwoofer
- Automatic Sample-Rate Detection and Coefficient Banking
General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- Thermal and Short-Circuit Protection

All other trademarks are the property of their respective owners

Audio Input/Output
- 20-W into an 8-Ω Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
- Supports Multiple Output Configurations:
  - 2-Ch Bridged Outputs (20 W × 2)
  - 4-Ch Single-Ended Outputs (10 W × 4)
  - 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate Sound
  With Improved Bass Response
- Constant Output Power Over Variation in Supply
Wide PVCC Range From (10 V to 26 V)
- No Separate Supply Required for Gate Drive
Supports 32-kHz–192-kHz Sample Rates (LJ/RJ/I²S)
Headphone PWM Outputs
Subwoofer PWM Outputs
AM Interference Avoidance Support
Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to
  –100-dB Range—Soft Mute (50% Duty Cycle)
- Programmable Dynamic Range Control
- 16 Programmable Biquads for Speaker Equalization
- Adaptive Biquad Coefficients for EQ and DRC Filters
- Programmable Input and Output Mixers
- Loudness Compensation for Subwoofer
- Automatic Sample-Rate Detection and Coefficient Banking
General Features
- Serial Control Interface Operational Without MCLK
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- Thermal and Short-Circuit Protection

All other trademarks are the property of their respective owners

The TAS5706 is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5706 is a slave-only device receiving all clocks from external sources. The TAS5706 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5706 is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.

The TAS5706 is a slave-only device receiving all clocks from external sources. The TAS5706 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

open-in-new

Buscar otro/a Amplificadores para altavoces

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	20W-Stereo Digital Audio Power Amplifier With EQ and DRC datasheet (Rev. B)		06 dic 2010

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Paquete	Pasadores	Descargar
HTQFP (PAP)	64	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TAS5706

Amplificador de potencia de audio I2S de circuito cerrado estéreo de 20 W con EQ de altavoz y DRC

TAS5706

Detalles del producto

Documentación técnica

Diseño y desarrollo

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos