TPA3132D2

Name: TPA3132D2
Brand: TI
SKU: TPA3132D2
Price: 0.77 USD

ACTIVO

Amplificador de audio estéreo de 25 W y mono de 50 W, Clase D, entrada analógica y alimentación de 4

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPA313xD2 4-W, 25-W Filter-Free Class-D Stereo Amplifier With AM Avoidance datasheet (Rev. B) (Inglés) PDF | HTML

TPA3132D2

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

4.5

Load (min) (Ω)

2

Output power (W)

4

SNR (dB)

105

THD + N at 1 kHz (%)

0.1

Iq (typ) (mA)

16

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

26

PSRR (dB)

70

Operating temperature range (°C)

-40 to 85

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

Stereo

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

4.5

Load (min) (Ω)

2

Output power (W)

4

SNR (dB)

105

THD + N at 1 kHz (%)

0.1

Iq (typ) (mA)

16

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

26

PSRR (dB)

70

Operating temperature range (°C)

-40 to 85

VQFN (RHB)

32

25 mm² 5 x 5

Supports Multiple Output Configurations
- 2 × 4 W into a 8-Ω BTL Load at 7.4 V (TPA3131D2)
- 2 × 25 W into a 8-Ω BTL Load at 19 V (TPA3132D2)
Wide Voltage Range: 4.5 V to 26 V
Automotive Load-Dump Compliant
Efficient Class-D Operation
- >90% Power Efficiency Combined With Low Idle Loss
  for Heat Sink free Operation
- Advanced Modulation Schemes
Multiple Switching Frequencies
- AM Avoidance
- Master and Slave Synchronization
- Up to 1.2-MHz Switching Frequency
Feedback Power Stage Architecture With High PSRR Reduces
PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage,
Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Package
- 32-Pin VQFN Pad-Down
–40°C to 85°C Ambient Temperature Range

Supports Multiple Output Configurations
- 2 × 4 W into a 8-Ω BTL Load at 7.4 V (TPA3131D2)
- 2 × 25 W into a 8-Ω BTL Load at 19 V (TPA3132D2)
Wide Voltage Range: 4.5 V to 26 V
Automotive Load-Dump Compliant
Efficient Class-D Operation
- >90% Power Efficiency Combined With Low Idle Loss
  for Heat Sink free Operation
- Advanced Modulation Schemes
Multiple Switching Frequencies
- AM Avoidance
- Master and Slave Synchronization
- Up to 1.2-MHz Switching Frequency
Feedback Power Stage Architecture With High PSRR Reduces
PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage,
Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Package
- 32-Pin VQFN Pad-Down
–40°C to 85°C Ambient Temperature Range

The TPA313xD2 are efficient, stereo digital amplifier power stages for driving speakers with up to 2×42W/4Ω peak power. TPA3131/32D2 operates heatsink-free with cooling to PCB through the bottom side PowerPAD with sustained output power from 2 × 4 W / 8 Ω (TPA3131D2) to 2 × 25 W / 8 Ω (TPA3132D2).

The TPA313xD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of Master and Slave synchronization, making it possible to synchronize multiple devices.

The TPA313xD2 are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

For feature compatible devices see: PowerPAD up device 2 × 50-W TPA3116D2, PowerPAD down 2 × 15-W TPA3130D2 and 2 × 30-W TPA3118D2.

The TPA313xD2 are efficient, stereo digital amplifier power stages for driving speakers with up to 2×42W/4Ω peak power. TPA3131/32D2 operates heatsink-free with cooling to PCB through the bottom side PowerPAD with sustained output power from 2 × 4 W / 8 Ω (TPA3131D2) to 2 × 25 W / 8 Ω (TPA3132D2).

The TPA313xD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of Master and Slave synchronization, making it possible to synchronize multiple devices.

The TPA313xD2 are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.

For feature compatible devices see: PowerPAD up device 2 × 50-W TPA3116D2, PowerPAD down 2 × 15-W TPA3130D2 and 2 × 30-W TPA3118D2.

open-in-new

Buscar otro/a Amplificadores para altavoces

Descargar Ver vídeo con transcripción Video

Amplificador de audio estéreo de Clase D, entrada analógica y 30 W de última generación: TPA3118D2

Está disponible el amplificador estéreo clase D de 30 W de última generación con disipación de potencia de ralentí bajo (entrada analógica) para sistemas que funcionan con batería: TPA3128D2

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 5

	Tipo	Título		Fecha
*	Data sheet	TPA313xD2 4-W, 25-W Filter-Free Class-D Stereo Amplifier With AM Avoidance datasheet (Rev. B)	PDF \| HTML	16 ene 2015
	Application note	Guidelines for Measuring Audio Power Amplifier Performance (Rev. A)		26 ago 2019
	Application note	AN-1849 An Audio Amplifier Power Supply Design (Rev. C)		27 jun 2019
	EVM User's guide	TPA3132D2 EVM User's Guide		26 jun 2013
	Application note	AN-1737 Managing EMI in Class D Audio Applications (Rev. A)		01 may 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPA3132D2EVM — TPA3132D2EVM para amplificador de altavoz de Clase D y 25 W

The TPA3132D2EVM is a stereo analog input, Class-D speaker amplifier IC for driving speakers with output power of 2x25W into 8Ω. TPA3132D2 operates heat sink-free with cooling to the PCB through the PowerPAD™ package. The TPA3132 has an advanced oscillator/PLL circuit which employs a (...)

Guía del usuario: PDF

No disponible en TI.com

Modelo de simulación

TPA3132D2 TINA-TI Average Reference Design

SLOM370.TSC (104 KB) - TINA-TI Reference Design

Descargar

Modelo de simulación

TPA3132D2 TINA-TI Average Spice Model

SLOM369.ZIP (34 KB) - TINA-TI Spice Model

Descargar

Modelo de simulación

TPA3132D2 TINA-TI Reference Design

SLOM372.TSC (89 KB) - TINA-TI Reference Design

Descargar

Modelo de simulación

TPA3132D2 TINA-TI Spice Model

SLOM373.ZIP (40 KB) - TINA-TI Spice Model

Descargar

Modelo de simulación

TPA3132D2 Unencrypted PSpice Average Model Package (Rev. A)

SLOM371A.ZIP (20 KB) - PSpice Model

Descargar

Modelo de simulación

TPA3132D2 Unencrypted PSpice Model Package (Rev. A)

SLOM368A.ZIP (19 KB) - PSpice Model

Descargar

Archivo Gerber

TPA3131-32-33D2EVM RevA Gerber Files

SLOC294.ZIP (477 KB)

Descargar

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Solicitar

Paquete	Pasadores	Descargar
VQFN (RHB)	32	Ver opciones

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

TPA3132D2

Amplificador de audio estéreo de 25 W y mono de 50 W, Clase D, entrada analógica y alimentación de 4

TPA3132D2

Detalles del producto

Documentación técnica

Diseño y desarrollo

TPA3132D2EVM — TPA3132D2EVM para amplificador de altavoz de Clase D y 25 W

TPA3132D2 TINA-TI Average Reference Design

TPA3132D2 TINA-TI Average Spice Model

TPA3132D2 TINA-TI Reference Design

TPA3132D2 TINA-TI Spice Model

TPA3132D2 Unencrypted PSpice Average Model Package (Rev. A)

TPA3132D2 Unencrypted PSpice Model Package (Rev. A)

TPA3131-32-33D2EVM RevA Gerber Files

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos