Inicio Audio Amplificadores de audio Amplificadores para altavoces
Inicio
Audio
Amplificadores de audio
Amplificadores para altavoces

TPA6211A1-Q1

ACTIVO

Amplificador de audio mono de Clase AB, entrada analógica y 3.1 W para automoción

Haga su pedido ahora
Hoja de datos

TPA6211A1-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Automotive Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 3 Output power (W) 3.1 SNR (dB) 105 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 85 Operating temperature range (°C) -40 to 105
Audio input type Analog Input Architecture Class-AB Speaker channels (max) Mono Rating Automotive Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.5 Load (min) (Ω) 3 Output power (W) 3.1 SNR (dB) 105 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 4 Control interface Hardware Closed/open loop Closed Analog supply (min) (V) 2.5 Analog supply voltage (max) (V) 5.5 PSRR (dB) 85 Operating temperature range (°C) -40 to 105
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Qualified for automotive applications
    • Temperature Grade 2: –40°C to 105°C TA
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C6
  • 3.1W into 3Ω from a 5V supply at THD = 10% (typical)
  • Low supply current: 4mA (typical) at 5V
  • Shutdown current: 0.01µA (typical)
  • Fast startup with minimal pop
  • Only three external components
    • Improved PSRR (–80dB) and wide supply voltage (2.5V to 5.5V) for direct battery operation
    • Fully differential design reduces RF rectification
    • –63dB CMRR Eliminates two input coupling capacitors
  • Qualified for automotive applications
    • Temperature Grade 2: –40°C to 105°C TA
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C6
  • 3.1W into 3Ω from a 5V supply at THD = 10% (typical)
  • Low supply current: 4mA (typical) at 5V
  • Shutdown current: 0.01µA (typical)
  • Fast startup with minimal pop
  • Only three external components
    • Improved PSRR (–80dB) and wide supply voltage (2.5V to 5.5V) for direct battery operation
    • Fully differential design reduces RF rectification
    • –63dB CMRR Eliminates two input coupling capacitors

The TPA6211A1-Q1 device is a 3.1W mono fully-differential amplifier designed to drive a speaker with at least 3Ω impedance while consuming only 20mm2 total printed-circuit board (PCB) area in most applications. The device operates from 2.5V to 5.5V, drawing only 4mA of quiescent supply current. The TPA6211A1-Q1 device is available in the space-saving 8-pin HVSSOP package.

The device includes features such as a –80dB supply voltage rejection from 20Hz to 2kHz, improved RF-rectification immunity, small PCB area, and a fast start-up with minimal pop makes the TPA6211A1-Q1 device an excellent choice for emergency call applications. Additionally, the device supports low-power needs in infotainment and cluster applications, such as cluster chimes or driver notification.

The TPA6211A1-Q1 device is a 3.1W mono fully-differential amplifier designed to drive a speaker with at least 3Ω impedance while consuming only 20mm2 total printed-circuit board (PCB) area in most applications. The device operates from 2.5V to 5.5V, drawing only 4mA of quiescent supply current. The TPA6211A1-Q1 device is available in the space-saving 8-pin HVSSOP package.

The device includes features such as a –80dB supply voltage rejection from 20Hz to 2kHz, improved RF-rectification immunity, small PCB area, and a fast start-up with minimal pop makes the TPA6211A1-Q1 device an excellent choice for emergency call applications. Additionally, the device supports low-power needs in infotainment and cluster applications, such as cluster chimes or driver notification.
open-in-new Buscar otro/a Amplificadores para altavoces
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
TPA6211T-Q1 ACTIVO Amplificador de audio mono de Clase AB, entrada analógica y 3.1 W para automoción Pin-to-pin package upgrade with AEC-Q100 qualification
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPA6211A1 ACTIVO Amplificador de audio mono de Clase AB, entrada analógica y 3.1 W Catalog version without AEC-Q100 qualification

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPA6211A1-Q1 3.1-W Mono Fully Differential Audio Power Amplifier datasheet (Rev. F) PDF | HTML 22 ago 2023
Technical article Exploring evolving trends in automotive cluster audio design PDF | HTML 17 feb 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPA6211A1EVM — Módulo de evaluación (EVM) TPA6211A1

The TPA6211A1 is a 3.1-W mono fully differential amplifier designed to drive a speaker with at least 3-Ohm impedance while comsuming less than 20mm2 total board space.

The device operates from 2.5V to 5.5V while consuming only 4mA of quiescent current. The TPA6211A1 is available in a space-saving (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPA6211A1 PSpice Model

SLOM437.ZIP (25 KB) - PSpice Model
Descargar
Modelo de simulación

TPA6211A1 TINA-TI Reference Design

SLOM439.TSC (60 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TPA6211A1 TINA-TI Spice Model

SLOM438.ZIP (13 KB) - TINA-TI Spice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-01628 — Diseño de referencia para las funciones de notificación del controlador del cuadro de instrumentos p

This reference design implements power and driver notification functions typically found in an automotive instrument cluster. The design features reverse battery protection, a pre-boost stage to support cold-crank battery voltage conditions down to 3.5 volts, buck regulators for 3.3-V and 5-V (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00277 — Diseño de referencia de sonidos de cuadro de instrumentos de calidad automotriz

This TI reference design is a 3.1-W mono fully differential audio power amplifier driving a chime and is one part of an automotive cluster system solution optimized for the mid-end cluster market. The entire cluster solution supports 4.5-40V system capabilities that can withstand cold crank, start (...)
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
HVSSOP (DGN) 8 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos