The TPS22962 is a small, ultra-low RON, single channel load switch with controlled turn on. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8 V to 5.5 V and supports a maximum continuous current of 10 A.
The combination of ultra-low RON and high current capability of the device makes it ideal for driving processor rails with very tight voltage dropout tolerances. The controlled rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating voltage droop on the power supply. The switch can be independently controlled via the ON pin, which is capable of interfacing directly with low-voltage control signals originating from microcontrollers or low voltage discrete logic. The device further reduces the total solution size by integrating a 224-Ω pull-down resistor for quick output discharge (QOD) when the switch is turned off.
The TPS22962 is available in a small 3.00 mm x 3.00 mm WSON-8 package (DNY). The DNY package integrates a thermal pad which allows for high power dissipation in high current and high temperature applications. The device is characterized for operation over the free-air temperature range of –40°C to 105°C.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPS22962 5.5-V, 10-A, 4.4-mΩ On-Resistance Load Switch datasheet (Rev. B) | PDF | HTML | 27 jul 2015 |
| Application note | Load Switch Thermal Considerations (Rev. A) | 11 oct 2018 | ||
| Application note | Basics of Load Switches (Rev. A) | 05 sep 2018 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 30 abr 2017 | ||
| Application note | Timing of Load Switches | 27 abr 2017 | ||
| Application note | Managing Inrush Current (Rev. A) | 28 may 2015 | ||
| EVM User's guide | TPS22962EVM-079 10A Load Switch IC | 21 jul 2014 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The TPS22962EVM is a two sided PCB containing the TPS22962 load switch device. The VIN and VOUT connections to the device and the PCB layout routing are capable of handling high continuous currents and provide a low resistance pathway into and out of the device under test. Test point connections (...)
| Paquete | Pasadores | Descargar |
|---|---|---|
| WSON (DNY) | 8 | Ver opciones |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.