Inicio Gestión de la energía Interruptores de alimentación y controladores de puertos de carga USB

TPS2561

ACTIVO

Interruptor de alimentación USB de 44 mΩ, ILIMIT ajustable de 0.25 a 2.8 A, 2 canales, de 2.5 a 6.5 

Detalles del producto

Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 2.5 Current limit (A) 0.25 to 2.5 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 2 Current limit accuracy at 1 A 7.5% (2590mA min / 3005mA max) Rating Catalog
Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 2.5 Current limit (A) 0.25 to 2.5 Operating temperature range (°C) -40 to 125 Enable Active High Number of switches 2 Current limit accuracy at 1 A 7.5% (2590mA min / 3005mA max) Rating Catalog
VSON (DRC) 10 9 mm² 3 x 3
  • Two separate current limiting channels
  • Meets USB current-limiting requirements
  • Adjustable current limit: 250 mA to 2.8 A (typ)
  • ± 7.5% current-limit accuracy at 2.8 A
  • Fast overcurrent response: 3.5 µs (typ)
  • Two 44-mΩ high-side MOSFETs
  • Operating range: 2.5 V to 6.5 V
  • 2-µA maximum standby supply current
  • Built-in soft-start
  • 15-kV, 8-kV system-level ESD capable
  • UL listed: file no. E169910
  • CB and Nemko certified
  • Two separate current limiting channels
  • Meets USB current-limiting requirements
  • Adjustable current limit: 250 mA to 2.8 A (typ)
  • ± 7.5% current-limit accuracy at 2.8 A
  • Fast overcurrent response: 3.5 µs (typ)
  • Two 44-mΩ high-side MOSFETs
  • Operating range: 2.5 V to 6.5 V
  • 2-µA maximum standby supply current
  • Built-in soft-start
  • 15-kV, 8-kV system-level ESD capable
  • UL listed: file no. E169910
  • CB and Nemko certified

The TPS2560 and TPS2561 (TPS256x) are dual-channel power-distribution switches intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 250 mA and 2.8 A (typ) per channel through an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turn on and off.

Each channel of the TPS256x devices limit the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULTx logic output for each channel independently asserts low during overcurrent and overtemperature conditions.

The TPS2560 and TPS2561 (TPS256x) are dual-channel power-distribution switches intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 250 mA and 2.8 A (typ) per channel through an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turn on and off.

Each channel of the TPS256x devices limit the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULTx logic output for each channel independently asserts low during overcurrent and overtemperature conditions.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS2560 ACTIVO Interruptor de alimentación USB de 44 mΩ, ILIMIT ajustable de 0.25-2.8 A, 2 canales, 2.5-6.5 V, acti This product offers the same functionality and pinout with enable active-low.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Tipo Título Fecha
* Data sheet TPS256x Dual Channel Precision Adjustable Current-limited Power Switches datasheet (Rev. C) PDF | HTML 22 oct 2020
Certificate US-37138-UL Certificate of Compliance IEC 62368-1 12 mar 2021
Selection guide USB Type-A Power Switch and Charging Controller Selector Guide (Rev. F) 24 may 2018
EVM User's guide Using the TPS2560/1EVM 19 nov 2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

FPC401EVM — Módulo de evaluación de controlador de puerto cuádruple FPC401

The FPC401EVM aggregates all low-speed signals of two stacked on-board QSFP and SFP cages and LEDs, allowing full control of the four ports through a single I2C or SPI interface. The on-board MSP430 controller and GUI allow for easy configuration and testing of the FPC401 with both I2C and SPI and (...)
Guía del usuario: PDF
Placa de evaluación

FPC402EVM — Módulo de evaluación de controlador de puerto cuádruple FPC402

The FPC402EVM aggregates all low-speed signals of two stacked on-board QSFP and SFP cages and LEDs, allowing full control of the four ports through a single I2C or SPI interface. The on-board MSP430 controller and GUI allow for easy configuration and testing of the FPC401 with both I2C and SPI and (...)
Guía del usuario: PDF
Placa de evaluación

TPS2561DRCEVM-424 — TPS2561DRCEVM-424: Módulo de evaluación para TPS2561

The TPS2560EVM-424 and TPS2561EVM-424 are evaluation modules (EVM) for Texas Instruments power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5-V to 6.5-V range. An on-board jumper sets the output current-limit to either 0.5 A or 1 A. The board is designed for the (...)

Guía del usuario: PDF
Placa de evaluación

TUSB4020BPHPEVM — Módulo de evaluación TUSB4020BPHPEVM

The Texas Instruments TUSB4020B evaluation module is a functional board design of a single device that implements a USB 2.0 hub. The EVM can support USB 2.0 (HS, FS, and LS) operation on its USB ports. This EVM is intended for use in evaluating system compatibility, developing optional EEPROM (...)

Guía del usuario: PDF
Modelo de simulación

TPS2561 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM475A.ZIP (33 KB) - PSpice Model
Diseños de referencia

TIDEP0076 — Diseño de referencia de visión artificial 3D basado en el procesador AM572x con luz estructurada DLP

The TIDEP0076 3D machine vision design describes an embedded 3D scanner based on the structured light principle. A digital camera along with a Sitara™ AM57xx processor System on Chip (SoC)  is used to capture reflected light patterns from a DLP4500-based projector. Subsquent processing (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00882 — Diseño de referencia de suministro de energía de USB tipo C HDD con USB

This reference design uses Texas Instrument's SuperSpeed USB 3.0 to SATA bridge, USB Type-CTM and USB PD controller with integrated power switch and High-Speed USB mux, and SuperSpeed USB 3.1 mux to demonstrate the subsystems required to implement a Type-C external hard disk drive capable of (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

TIDEP0046 — Diseño de referencia de simulación Monte-Carlo en AM57x con OpenCL para aceleración DSP

TI’s high performance ARM® Cortex®-A15 based AM57x processors also integrate C66x DSPs. These DSPs were designed to handle high signal and data processing tasks that are often required by industrial, automotive and financial applications. The AM57x OpenCL implementation makes it easy (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDEP0047 — Diseño de referencia de las consideraciones sobre el diseño térmico y de energía con el procesador A

This is a reference design based on the AM57x processor and companion TPS659037 power management integrated circuit (PMIC).  This design specifically highlights important power and thermal design considerations and techniques for systems designed with AM57x and TPS659037.  It includes (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

PMP9402 — Diseño de referencia de cargador de auto USB doble de 2.5 A y tamaño compacto

PMP9402 is a dual USB car charger. This design utilizes the LM3150, TPS2561 Dual Channel Power Switch and a TPS2513 USB Dedicated Charging Port Controller. This design operates from 6 to 40V in. The output is set to 5V; both channels have a 2.5A current limit. This design has a switching frequency (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP9367 — Diseño de referencia de cargador de auto USB doble de 17.5 W

PMP9367 is a dual USB car charger reference design intended for use in aftermarket automotive application. This design utilizes the LM3150, TPS2561 Dual Channel Power Switch and a TPS2513 USB Dedicated Charging Port Controller. This design operates from 6 to 40V in. The outputs is set to 5V, (...)
Test report: PDF
Esquema: PDF
Paquete Pasadores Descargar
VSON (DRC) 10 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos