Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)

TPS54331

ACTIVO

Convertidor reductor con entrada de 3.5 V a 28 V, 3 A y 570 kHz con Eco-Mode

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS62933 ACTIVO Convertidor reductor síncrono de 3.8 V a 30 V, 3 A, 200 kHz a 2.2 MHz, bajo IQ en encapsulado SOT-58 This product offers wider Vin, higher frequency and lower IQ.

Detalles del producto

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3.5 Vin (max) (V) 28 Switching frequency (min) (kHz) 570 Switching frequency (max) (kHz) 570 Features Enable, Light Load Efficiency, Soft Start Adjustable, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 25 Iq (typ) (µA) 110 Duty cycle (max) (%) 90
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3.5 Vin (max) (V) 28 Switching frequency (min) (kHz) 570 Switching frequency (max) (kHz) 570 Features Enable, Light Load Efficiency, Soft Start Adjustable, UVLO adjustable Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 25 Iq (typ) (µA) 110 Duty cycle (max) (%) 90
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 SOIC (D) 8 29.4 mm² 4.9 x 6
  • 3.5 to 28-V input voltage range
  • Adjustable output voltage down to 0.8 V
  • Integrated 80-mΩ high-side MOSFET supports up to 3-A continuous output current
  • High efficiency at light loads with a pulse skipping Eco-mode
  • Fixed 570-kHz switching frequency
  • Typical 1-µA shutdown quiescent current
  • Adjustable slow-start limits inrush currents
  • Programmable UVLO threshold
  • Overvoltage transient protection
  • Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protection
  • Available in easy-to-use SOIC8 package or thermally-enhanced SOIC8 PowerPAD™ integrated circuit package
  • Create a custom design using the TPS54331 with the WEBENCH Power Designer
  • Use TPS62933 for a 30 VIN converter with higher frequency, lower IQ and improved EMI
  • 3.5 to 28-V input voltage range
  • Adjustable output voltage down to 0.8 V
  • Integrated 80-mΩ high-side MOSFET supports up to 3-A continuous output current
  • High efficiency at light loads with a pulse skipping Eco-mode
  • Fixed 570-kHz switching frequency
  • Typical 1-µA shutdown quiescent current
  • Adjustable slow-start limits inrush currents
  • Programmable UVLO threshold
  • Overvoltage transient protection
  • Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protection
  • Available in easy-to-use SOIC8 package or thermally-enhanced SOIC8 PowerPAD™ integrated circuit package
  • Create a custom design using the TPS54331 with the WEBENCH Power Designer
  • Use TPS62933 for a 30 VIN converter with higher frequency, lower IQ and improved EMI

The TPS54331 device is a 28-V, 3-A non-synchronous buck converter that integrates a low R DS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1-µA shutdown supply-current allows the device to be used in battery-powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during start-up and transient conditions. A cycle-by-cycle current-limit scheme, frequency foldback and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54331 device is available in an 8-pin SOIC package and 8-pin SO PowerPAD integrated circuit package that have been internally optimized to improve thermal performance.

The TPS54331 device is a 28-V, 3-A non-synchronous buck converter that integrates a low R DS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1-µA shutdown supply-current allows the device to be used in battery-powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during start-up and transient conditions. A cycle-by-cycle current-limit scheme, frequency foldback and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54331 device is available in an 8-pin SOIC package and 8-pin SO PowerPAD integrated circuit package that have been internally optimized to improve thermal performance.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS54332 ACTIVO Convertidor reductor con entrada de 3.5 V a 28 V y 3.5 A, 1 MHz con Eco-Mode This product offers higher switching frequency.
TPS54531 ACTIVO Convertidor reductor con entrada de 3.5 V a 28 V, 5 A y 570 kHz con Eco-Mode Equivalent part with higher output current.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Tipo Título Fecha
* Data sheet TPS54331 3-A, 28-V Input, Step Down DC-DC Converter With Eco-mode datasheet (Rev. H) PDF | HTML 10 oct 2023
User guide TPS54331 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 08 oct 2021
Application note Low Dropout Operation in a Buck Converter (Rev. A) 01 abr 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note Understanding Eco-mode(TM) Operation 05 dic 2016
Application note Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co 11 jul 2014
Application note Simple CC/CV Charger using TPS54331 30 nov 2012
Application note Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) 26 oct 2012
Application note Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) 15 sep 2010
Analog Design Journal Efficiency of synchronous versus nonsynchronous buck converters 04 oct 2009
Application note Understanding and Applying Current-Mode Control Theory 19 ago 2007
Application note Modeling, Analysis and Compensation of the Current-Mode Converter 05 sep 1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS54331EVM-232 — Módulo de evaluación de 3 A, salida de 3.3 V, entrada de 28 V TPS54331

The TPS54331EVM-232 is a fully assembled and tested circuit for evaluating the TPS54331 synchronous step-down SWIFT™ converter. The EVM converts a 3.5-V to 28-V input voltage to a regulated 3.3-V output voltage that delivers up to 3-A output. The switching frequency is internally set at a (...)

Guía del usuario: PDF | HTML
Modelo de simulación

TPS54331 TINA-TI Average Reference Design

SLVMC20.TSC (580 KB) - TINA-TI Reference Design
Modelo de simulación

TPS54331 TINA-TI Average Spice Model

SLVMC21.ZIP (8 KB) - TINA-TI Spice Model
Modelo de simulación

TPS54331 TINA-TI Transient Reference Design (Rev. A)

SLIM041A.TSC (390 KB) - TINA-TI Reference Design
Modelo de simulación

TPS54331 TINA-TI Transient Spice Model (Rev. A)

SLIM042A.TSM (14 KB) - TINA-TI Spice Model
Modelo de simulación

TPS54331 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM659A.ZIP (55 KB) - PSpice Model
Herramienta de cálculo

SWIFTINV-CALC SWIFT™ Converter Inverting Buck/Boost Calculator

The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS54040 Convertidor reductor con entrada de 3.5 V a 42 V y 0.5 A con Eco-Mode TPS54060 Convertidor reductor con entrada de 3.5 V a 60 V y 0.5 A con Eco-Mode TPS54060-EP Convertidor CC/CC reductor de 60 V y 0.5 A TPS54060-EP con Eco-Mode TPS54140 Convertidor reductor con entrada de 3.5 V a 42 V y 1.5 A con Eco-Mode TPS54160 Convertidor reductor con entrada de 3.5 V a 60 V y 1.5 A con Eco-Mode TPS54231 Convertidor reductor de 570 kHz, entrada de 3.5 V a 28 V, 2 A, con Eco-Mode™ TPS54232 Convertidor reductor de 2 A, entrada de 3,5 V a 28 V, con Eco-Mode TPS54233 Convertidor reductor de 300 kHz, entrada de 3.5 V a 28 V, 2 A, con Eco-Mode TPS54260 Convertidor reductor con entrada de 3.5 V a 60 V y 2.5A con Eco-Mode TPS54331 Convertidor reductor con entrada de 3.5 V a 28 V, 3 A y 570 kHz con Eco-Mode TPS54332 Convertidor reductor con entrada de 3.5 V a 28 V y 3.5 A, 1 MHz con Eco-Mode TPS54340 Convertidor CC/CC reductor de 3.5 A, entrada de 42 V, con Eco-Mode™ TPS54360 Convertidor reductor con entrada de 4.5 V a 60 V y 3.5 A con Eco-Mode TPS54360B Convertidor CC/CC reductor de 3.5 A, entrada de 60 V, con Eco-Mode™ TPS54540 Convertidor CC/CC reductor de 5 A, entrada de 42 V, con Eco-Mode TPS54560 Convertidor reductor con entrada de 4.5 V a 60 V y 5 A con Eco-Mode TPS54560B Convertidor CC/CC reductor de 5 A, entrada de 4.5 V a 60 V, con Eco-Mode™ TPS54561 Convertidor CC-CC reductor con entrada de 4.5 V a 60 V y 5 A con inicio suave y Eco-Mode™
Herramienta de cálculo

SWIFTPOSNEG-CALC TPS54160 Pos/Neg Calculation Utility Download

The SWIFTPosNeg-CALC Excel sheet is a complementary worksheet to the SLVA369 application note.

This worksheet is used to calculate the external components needed to create a dual output (i.e. positive and negative) power supply using a step-down switching regulator and catalog off the shelf coupled (...)

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Convertidores de CA/CC y CC/CC (FET integrado)
TPS54040 Convertidor reductor con entrada de 3.5 V a 42 V y 0.5 A con Eco-Mode TPS54060 Convertidor reductor con entrada de 3.5 V a 60 V y 0.5 A con Eco-Mode TPS54060-EP Convertidor CC/CC reductor de 60 V y 0.5 A TPS54060-EP con Eco-Mode TPS54140 Convertidor reductor con entrada de 3.5 V a 42 V y 1.5 A con Eco-Mode TPS54160 Convertidor reductor con entrada de 3.5 V a 60 V y 1.5 A con Eco-Mode TPS54231 Convertidor reductor de 570 kHz, entrada de 3.5 V a 28 V, 2 A, con Eco-Mode™ TPS54232 Convertidor reductor de 2 A, entrada de 3,5 V a 28 V, con Eco-Mode TPS54233 Convertidor reductor de 300 kHz, entrada de 3.5 V a 28 V, 2 A, con Eco-Mode TPS54240 Convertidor reductor con entrada de 3.5 V a 42V y 2.5A con Eco-Mode TPS54260 Convertidor reductor con entrada de 3.5 V a 60 V y 2.5A con Eco-Mode TPS54331 Convertidor reductor con entrada de 3.5 V a 28 V, 3 A y 570 kHz con Eco-Mode TPS54332 Convertidor reductor con entrada de 3.5 V a 28 V y 3.5 A, 1 MHz con Eco-Mode
Opciones de descarga
Diseños de referencia

TIDA-01243 — Diseño de referencia de Minidock de USB tipo C™ y de suministro de energía con video y soporte de ca

The USB Type-C® and power delivery (PD) minidock reference design provides a reference for a USB Type-C dock including audio, USB data, power and video.  This reference design has a small 2-inch by 4-inch form factor and supports both source and sink power capabilities over the (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010055 — Diseño de referencia de arquitectura de alimentación no aislada con diagnóstico para módulos de relé

This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00393 — Diseño de referencia de adición de un LDO para aumentar la eficiencia del modo de espera

This regulation topology is designed to increase the efficiency of a DC/DC buck converter by disabling the converter during light-load operation and providing a regulated output voltage with a low-Iq LDO. During no-load or light-load conditions, the LDO allows for low-noise, low-Iq output voltage (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HSOIC (DDA) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos