제품 상세 정보

Local sensor accuracy (max) 2, 3 Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 10 Supply current (max) (µA) 110 Interface type Analog output Sensor gain (mV/°C) 6.25 Rating Catalog
Local sensor accuracy (max) 2, 3 Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 10 Supply current (max) (µA) 110 Interface type Analog output Sensor gain (mV/°C) 6.25 Rating Catalog
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37 TO-92 (LP) 3 19.136 mm² 5.2 x 3.68
  • Calibrated Linear Scale Factor of 6.25 mV/°C
  • Rated for Full −40°C to +125°C Range
  • Suitable for Remote Applications
  • Available in SOT-23 and TO-92 Packages
  • Key Specifications
    • Accuracy at 25°C: ±2°C and ±3°C (Maximum)
    • Accuracy for −40°C to +125°C: ±4°C (Maximum)
    • Accuracy for −25°C to +125°C: ±3°C (Maximum)
    • Temperature Slope: 6.25 mV/°C
    • Power-Supply Voltage Range: 2.7 V to 10 V
    • Current Drain at 25°C: 110 µA (Maximum)
    • Nonlinearity: ±0.8°C (Maximum)
    • Output Impedance: 800 Ω (Maximum)
  • Calibrated Linear Scale Factor of 6.25 mV/°C
  • Rated for Full −40°C to +125°C Range
  • Suitable for Remote Applications
  • Available in SOT-23 and TO-92 Packages
  • Key Specifications
    • Accuracy at 25°C: ±2°C and ±3°C (Maximum)
    • Accuracy for −40°C to +125°C: ±4°C (Maximum)
    • Accuracy for −25°C to +125°C: ±3°C (Maximum)
    • Temperature Slope: 6.25 mV/°C
    • Power-Supply Voltage Range: 2.7 V to 10 V
    • Current Drain at 25°C: 110 µA (Maximum)
    • Nonlinearity: ±0.8°C (Maximum)
    • Output Impedance: 800 Ω (Maximum)

The LM60 device is a precision integrated-circuit temperature sensor that can sense a −40°C to +125°C temperature range while operating from a single 2.7-V supply. The output voltage of the device is linearly proportional to Celsius (Centigrade) temperature (6.25 mV/°C) and has a DC offset of
424 mV. The offset allows reading negative temperatures without the need for a negative supply. The nominal output voltage of the device ranges from 174 mV to 1205 mV for a −40°C to +125°C temperature range. The device is calibrated to provide accuracies of ±2°C at room temperature and ±3°C over the full −25°C to +125°C temperature range.

The linear output of the device, 424-mV offset, and factory calibration simplify external circuitry required in a single supply environment where reading negative temperatures is required. Because the quiescent current of the device is less than 110 µA, self-heating is limited to a very low 0.1°C in still air in the SOT-23 package. Shutdown capability for the device is intrinsic because its inherent low power consumption allows it to be powered directly from the output of many logic gates.

The LM60 device is a precision integrated-circuit temperature sensor that can sense a −40°C to +125°C temperature range while operating from a single 2.7-V supply. The output voltage of the device is linearly proportional to Celsius (Centigrade) temperature (6.25 mV/°C) and has a DC offset of
424 mV. The offset allows reading negative temperatures without the need for a negative supply. The nominal output voltage of the device ranges from 174 mV to 1205 mV for a −40°C to +125°C temperature range. The device is calibrated to provide accuracies of ±2°C at room temperature and ±3°C over the full −25°C to +125°C temperature range.

The linear output of the device, 424-mV offset, and factory calibration simplify external circuitry required in a single supply environment where reading negative temperatures is required. Because the quiescent current of the device is less than 110 µA, self-heating is limited to a very low 0.1°C in still air in the SOT-23 package. Shutdown capability for the device is intrinsic because its inherent low power consumption allows it to be powered directly from the output of many logic gates.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품
LM60-Q1 활성 오토모티브 등급, ±2°C 아날로그 출력 온도 센서 Automotive qualified version
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
LM50 활성 10mV/°C 게인을 지원하는 ±2°C 아날로그 출력 온도 센서 Higher sensor gain (10 mV/°C). Pin-compatible alternative for SOT-23 package
TMP235 활성 1C 아날로그 온도 센서, 10mV/C Higher sensor gain (10 mV/°C) and higher accuracy (1.5°C). Pin-compatible alternative for SOT-23 package
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM56 활성 3°C 듀얼 출력 저장 프로그래머블 온도 스위치(팬 제어 지원) Temperature switch with an analog output with the same similar gain (6.2 mV/°C). Integrates comparator output, and it has a wider operating voltage (2.7 to 10V)

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet LM60 2.7-V, SOT-23 or TO-92 Temperature Sensor datasheet (Rev. F) PDF | HTML 2017/10/26
EVM User's guide LM60EVM User's Guide PDF | HTML 2022/10/20
Application note Tiny Temperature Sensors for Remote Systems 2003/02/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

레퍼런스 디자인

PMP23332 — 인터리브 및 다중 위상 인버팅 벅-부스트 컨버터 레퍼런스 설계

이 레퍼런스 설계는 UCD3138064A를 디지털 컨트롤러로 사용하여 2상 피크 전류 모드 제어를 지원하는 기능으로 인버팅 벅-부스트를 제어합니다. 이 설계에는 전력 효율을 향상시키기 위해 소프트 스위칭 기술이 사용됩니다. 입력 전압 범위는 -62V~-36V입니다. 출력 전압 범위는 28V~52V까지 조정 가능합니다. 기본 출력 전압은 48V이며 최대 전류는 14A입니다
Test report: PDF
레퍼런스 디자인

PMP20587 — 인버팅 벅-부스트 레퍼런스 디자인

This reference design uses UCD3138064A as a digital controller to control two-phase two-rail inverting buck-boost. This non-isolated converter is used for wireless radio power. The input voltage is from -35 V to -60 V. There are two outputs. The default output voltage of rail 1 is 32 V and max (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP4435 — GaN FET를 지원하는 48Vin, 300W 1/8 브릭 디지털 모듈 레퍼런스 디자인

The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good (...)
Test report: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00412 — 360W 디지털 제어 위상 변이 풀 브리지 컨버터 레퍼런스 디자인

DC-DC power converter with digital control using UCD3138CC64EVM-030 daughter-card. The daughter-card  with preloaded firmware providing the required control functions for a Phase Shift Full Bridge converter.  The TIDA-00412 (UCD3138PSFBEVM-027) accepts a DC input from 370 to 400 VDC, and (...)
회로도: PDF
패키지 다운로드
SOT-23 (DBZ) 3 옵션 보기
TO-92 (LP) 3 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상