제품 상세 정보

DSP type 1 C64x DSP (max) (MHz) 720 CPU 32-/64-bit Ethernet MAC 10/100 Rating Military Operating temperature range (°C) -40 to 105
DSP type 1 C64x DSP (max) (MHz) 720 CPU 32-/64-bit Ethernet MAC 10/100 Rating Military Operating temperature range (°C) -40 to 105
OMFCBGA (ZDK) 548 529 mm² 23 x 23
  • Controlled Baseline
    • One Assembly/Test/Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree(1)
  • High-Performance Digital Media Processor
    • 2 ns, 1.67 ns, 1.39 ns Instruction Cycle Time
    • 720 MHz Clock Rate (500/600 MHz devices are product preview only)
    • Eight 32-Bit Instructions/Cycle
    • 5760 MIPS
    • Fully Software-Compatible With C64x™
  • VelociTI.2™ Extensions to VelociTI™
    Advanced Very Long Instruction Word (VLIW) TMS320C64x™ DSP Core
    • Eight Highly Independent Functional Units With VelociTI.2™ Extensions:
      • Six ALUs (32/40 Bit), Each Supports Single 32 Bit, Dual 16 Bit,
        or Quad 8 Bit Arithmetic per Clock Cycle
      • Two Multipliers Support Four 16 × 16-Bit Multiplies (32 Bit Results) per
        Clock Cycle or Eight 8 × 8 Bit Multiplies (16 Bit Results) per Clock Cycle
    • Load-Store Architecture With Non-Aligned Support
    • 64 32-Bit General-Purpose Registers
    • Instruction Packing Reduces Code Size
    • All Instructions Conditional
  • Instruction Set Features
    • Byte Addressable (8/16/32/64 Bit Data)
    • 8-Bit Overflow Protection
    • Bit Field Extract, Set, Clear
    • Normalization, Saturation, Bit-Counting
    • VelociTI.2™ Increased Orthogonality
  • L1/L2 Memory Architecture
    • 128K Bit (16K Byte) L1P Program Cache (Direct Mapped)
    • 128K Bit (16K Byte) L1D Data Cache (2-Way Set-Associative)
    • 2M Bit (256K Byte) L2 Unified Mapped RAM/Cache (Flexible RAM/Cache
      Allocation)
  • Endianess: Little Endian, Big Endian
    • 64 Bit External Memory Interface (EMIF)
    • Glueless Interface to Asynchronous
      Memories (SRAM and EPROM) and
      Synchronous Memories (SDRAM, SBSRAM, ZBT SRAM, and FIFO)
  • 1024M-Byte Total Addressable External Memory Space
  • Enhanced Direct-Memory-Access (EDMA)
    Controller (64 Independent Channels)
  • 10/100 Mbps Ethernet MAC (EMAC)
    • IEEE 802.3 Compliant
    • Media Independent Interface (MII)
    • Eight Independent Transmit (TX) Channels and
      One Receive (RX) Channel
  • Management Data Input/Output (MDIO)
  • Three Configurable Video Ports
    • Provide a Glueless I/F to Common Video Decoder and Encoder Devices
    • Supports Multiple Resolutions/Video Stds
  • VCXO Interpolated Control Port (VIC)
    • Supports Audio/Video Synchronization
  • Host Port Interface (HPI) [32/16 Bit]
  • 32 Bit/66 MHz, 3.3-V Peripheral Component
    Interconnect (PCI) Master/Slave Interface
    Conforms to PCI Specification 2.2
  • Multichannel Audio Serial Port (McASP)
    • Eight Serial Data Pins
    • Wide Variety of I2S and Similar Bit Stream Format
    • Integrated Digital Audio I/F Transmitter Supports S/PDIF,
      IEC60958-1, AES-3, CP-430 Formats
  • Inter-Integrated Circuit (I2C Bus™)
  • Two Multichannel Buffered Serial Ports (McBSPs)
  • Three 32 Bit General Purpose Timers
  • Sixteen General Purpose I/O (GPIO) Pins
  • Flexible PLL Clock Generator
  • IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
  • 548 Pin Ball Grid Array (BGA) Package, 0.8 mm Ball Pitch
  • 0.13 µm/6 Level Cu Metal Process (CMOS)
  • 3.3 V I/O, 1.4 V Internal (A-500, A-600, -600, -720)

(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
C64x, VelociTI.2, VelociTI, TMS320C64x, C6000, TMS320C6000, DM64x, C62x, TMS320C62x, TMS320C67x, Code Composer Studio, DSP/BIOS, XDS, TMS320 are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

  • Controlled Baseline
    • One Assembly/Test/Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree(1)
  • High-Performance Digital Media Processor
    • 2 ns, 1.67 ns, 1.39 ns Instruction Cycle Time
    • 720 MHz Clock Rate (500/600 MHz devices are product preview only)
    • Eight 32-Bit Instructions/Cycle
    • 5760 MIPS
    • Fully Software-Compatible With C64x™
  • VelociTI.2™ Extensions to VelociTI™
    Advanced Very Long Instruction Word (VLIW) TMS320C64x™ DSP Core
    • Eight Highly Independent Functional Units With VelociTI.2™ Extensions:
      • Six ALUs (32/40 Bit), Each Supports Single 32 Bit, Dual 16 Bit,
        or Quad 8 Bit Arithmetic per Clock Cycle
      • Two Multipliers Support Four 16 × 16-Bit Multiplies (32 Bit Results) per
        Clock Cycle or Eight 8 × 8 Bit Multiplies (16 Bit Results) per Clock Cycle
    • Load-Store Architecture With Non-Aligned Support
    • 64 32-Bit General-Purpose Registers
    • Instruction Packing Reduces Code Size
    • All Instructions Conditional
  • Instruction Set Features
    • Byte Addressable (8/16/32/64 Bit Data)
    • 8-Bit Overflow Protection
    • Bit Field Extract, Set, Clear
    • Normalization, Saturation, Bit-Counting
    • VelociTI.2™ Increased Orthogonality
  • L1/L2 Memory Architecture
    • 128K Bit (16K Byte) L1P Program Cache (Direct Mapped)
    • 128K Bit (16K Byte) L1D Data Cache (2-Way Set-Associative)
    • 2M Bit (256K Byte) L2 Unified Mapped RAM/Cache (Flexible RAM/Cache
      Allocation)
  • Endianess: Little Endian, Big Endian
    • 64 Bit External Memory Interface (EMIF)
    • Glueless Interface to Asynchronous
      Memories (SRAM and EPROM) and
      Synchronous Memories (SDRAM, SBSRAM, ZBT SRAM, and FIFO)
  • 1024M-Byte Total Addressable External Memory Space
  • Enhanced Direct-Memory-Access (EDMA)
    Controller (64 Independent Channels)
  • 10/100 Mbps Ethernet MAC (EMAC)
    • IEEE 802.3 Compliant
    • Media Independent Interface (MII)
    • Eight Independent Transmit (TX) Channels and
      One Receive (RX) Channel
  • Management Data Input/Output (MDIO)
  • Three Configurable Video Ports
    • Provide a Glueless I/F to Common Video Decoder and Encoder Devices
    • Supports Multiple Resolutions/Video Stds
  • VCXO Interpolated Control Port (VIC)
    • Supports Audio/Video Synchronization
  • Host Port Interface (HPI) [32/16 Bit]
  • 32 Bit/66 MHz, 3.3-V Peripheral Component
    Interconnect (PCI) Master/Slave Interface
    Conforms to PCI Specification 2.2
  • Multichannel Audio Serial Port (McASP)
    • Eight Serial Data Pins
    • Wide Variety of I2S and Similar Bit Stream Format
    • Integrated Digital Audio I/F Transmitter Supports S/PDIF,
      IEC60958-1, AES-3, CP-430 Formats
  • Inter-Integrated Circuit (I2C Bus™)
  • Two Multichannel Buffered Serial Ports (McBSPs)
  • Three 32 Bit General Purpose Timers
  • Sixteen General Purpose I/O (GPIO) Pins
  • Flexible PLL Clock Generator
  • IEEE-1149.1 (JTAG) Boundary-Scan-Compatible
  • 548 Pin Ball Grid Array (BGA) Package, 0.8 mm Ball Pitch
  • 0.13 µm/6 Level Cu Metal Process (CMOS)
  • 3.3 V I/O, 1.4 V Internal (A-500, A-600, -600, -720)

(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
C64x, VelociTI.2, VelociTI, TMS320C64x, C6000, TMS320C6000, DM64x, C62x, TMS320C62x, TMS320C67x, Code Composer Studio, DSP/BIOS, XDS, TMS320 are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.

The C64x™ DSPs (including the SM320DM642-EP device) are the highest-performance fixed-point DSP generation in the C6000 DSP platform. The DM642 device is based on the second-generation high-performance, advanced VelociTI™ very-long-instruction-word (VLIW) architecture (VelociTI.2™) developed by Texas Instruments (TI), making these DSPs an excellent choice for digital media applications. The C64x is a code-compatible member of the C6000 DSP platform.

With performance of up to 5760 million instructions per second (MIPS) at a clock rate of 720 MHz, the DM642 device offers cost-effective solutions to high-performance DSP programming challenges. The DM642 DSP possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. The C64x™ DSP core processor has 64 general-purpose registers of 32-bit word length and eight highly independent functional units—two multipliers for a 32-bit result and six arithmetic logic units (ALUs)—with VelociTI.2™ extensions. The VelociTI.2 extensions in the eight functional units include new instructions to accelerate the performance in video and imaging applications and extend the parallelism of the VelociTI™ architecture. The DM642 can produce four 16-bit multiply-accumulates (MACs) per cycle for a total of 2880 million MACs per second (MMACS), or eight 8-bit MACs per cycle for a total of 5760 MMACS. The DM642 DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals similar to the other C6000 DSP platform devices.

The DM642 uses a two-level cache-based architecture and has a powerful and diverse set of peripherals. The Level 1 program cache (L1P) is a 128-Kbit direct mapped cache and the Level 1 data cache (L1D) is a 128-Kbit 2-way set-associative cache. The Level 2 memory/cache (L2) consists of an 2-Mbit memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. The peripheral set includes: three configurable video ports; a 10/100 Mbps Ethernet MAC (EMAC); a management data input/output (MDIO) module; a VCXO interpolated control port (VIC); one multichannel buffered audio serial port (McASP0); an inter-integrated circuit (I2C) Bus module; two multichannel buffered serial ports (McBSPs); three 32-bit general-purpose timers; a user-configurable 16-bit or 32-bit host-port interface (HPI16/HPI32); a peripheral component interconnect (PCI); a 16-pin general-purpose input/output port (GP0) with programmable interrupt/event generation modes; and a 64-bit glueless external memory interface (EMIFA), which is capable of interfacing to synchronous and asynchronous memories and peripherals.

The DM642 device has three configurable video port peripherals (VP0, VP1, and VP2). These video port peripherals provide a glueless interface to common video decoder and encoder devices. The DM642 video port peripherals support multiple resolutions and video standards (e.g., CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M).

These three video port peripherals are configurable and can support either video capture and/or video display modes. Each video port consists of two channels — A and B with a 5120-byte capture/display buffer that is splittable between the two channels.

For more details on the Video Port peripherals, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The McASP0 port supports one transmit and one receive clock zone, with eight serial data pins that can be individually allocated to any of the two zones. The serial port supports time-division multiplexing on each pin from 2 to 32 time slots. The DM642 has sufficient bandwidth to support all eight serial data pins transmitting a 192-kHz stereo signal. Serial data in each zone may be transmitted and received on multiple serial data pins simultaneously and formatted in a multitude of variations on the Philips Inter-IC Sound (I2S) format.

In addition, the McASP0 transmitter may be programmed to output multiple S/PDIF, IEC60958, AES-3, CP-430 encoded data channels simultaneously, with a single RAM containing the full implementation of user data and channel status fields.

McASP0 also provides extensive error-checking and recovery features, such as the bad clock detection circuit for each high-frequency master clock which verifies that the master clock is within a programmed frequency range.

The VCXO interpolated control (VIC) port provides digital-to-analog conversion with resolution from 9-bits to up to 16-bits. The output of the VIC is a single bit interpolated D/A output.For more details on the VIC port, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The ethernet media access controller (EMAC) provides an efficient interface between the DM642 DSP core processor and the network. The DM642 EMAC support both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex, with hardware flow control and quality of service (QOS) support. The DM642 EMAC makes use of a custom interface to the DSP core that allows efficient data transmission and reception.For more details on the EMAC, see the TMS320C6000 DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The management data input/output (MDIO) module continuously polls all 32 MDIO addresses in order to enumerate all PHY devices in the system. Once a PHY candidate has been selected by the DSP, the MDIO module transparently monitors its link state by reading the PHY status register. Link change events are stored in the MDIO module and can optionally interrupt the DSP, allowing the DSP to poll the link status of the device without continuously performing costly MDIO accesses. For more details on the MDIO, see the TMS320C6000™ DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The I2C0 port on the DM642 allows the DSP to easily control peripheral devices and communicate with a host processor. In addition, the standard multichannel buffered serial port (McBSP) may be used to communicate with serial peripheral interface (SPI) mode peripheral devices.

The DM642 has a complete set of development tools which includes: a new C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution.

The C64x™ DSPs (including the SM320DM642-EP device) are the highest-performance fixed-point DSP generation in the C6000 DSP platform. The DM642 device is based on the second-generation high-performance, advanced VelociTI™ very-long-instruction-word (VLIW) architecture (VelociTI.2™) developed by Texas Instruments (TI), making these DSPs an excellent choice for digital media applications. The C64x is a code-compatible member of the C6000 DSP platform.

With performance of up to 5760 million instructions per second (MIPS) at a clock rate of 720 MHz, the DM642 device offers cost-effective solutions to high-performance DSP programming challenges. The DM642 DSP possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. The C64x™ DSP core processor has 64 general-purpose registers of 32-bit word length and eight highly independent functional units—two multipliers for a 32-bit result and six arithmetic logic units (ALUs)—with VelociTI.2™ extensions. The VelociTI.2 extensions in the eight functional units include new instructions to accelerate the performance in video and imaging applications and extend the parallelism of the VelociTI™ architecture. The DM642 can produce four 16-bit multiply-accumulates (MACs) per cycle for a total of 2880 million MACs per second (MMACS), or eight 8-bit MACs per cycle for a total of 5760 MMACS. The DM642 DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals similar to the other C6000 DSP platform devices.

The DM642 uses a two-level cache-based architecture and has a powerful and diverse set of peripherals. The Level 1 program cache (L1P) is a 128-Kbit direct mapped cache and the Level 1 data cache (L1D) is a 128-Kbit 2-way set-associative cache. The Level 2 memory/cache (L2) consists of an 2-Mbit memory space that is shared between program and data space. L2 memory can be configured as mapped memory, cache, or combinations of the two. The peripheral set includes: three configurable video ports; a 10/100 Mbps Ethernet MAC (EMAC); a management data input/output (MDIO) module; a VCXO interpolated control port (VIC); one multichannel buffered audio serial port (McASP0); an inter-integrated circuit (I2C) Bus module; two multichannel buffered serial ports (McBSPs); three 32-bit general-purpose timers; a user-configurable 16-bit or 32-bit host-port interface (HPI16/HPI32); a peripheral component interconnect (PCI); a 16-pin general-purpose input/output port (GP0) with programmable interrupt/event generation modes; and a 64-bit glueless external memory interface (EMIFA), which is capable of interfacing to synchronous and asynchronous memories and peripherals.

The DM642 device has three configurable video port peripherals (VP0, VP1, and VP2). These video port peripherals provide a glueless interface to common video decoder and encoder devices. The DM642 video port peripherals support multiple resolutions and video standards (e.g., CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M).

These three video port peripherals are configurable and can support either video capture and/or video display modes. Each video port consists of two channels — A and B with a 5120-byte capture/display buffer that is splittable between the two channels.

For more details on the Video Port peripherals, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The McASP0 port supports one transmit and one receive clock zone, with eight serial data pins that can be individually allocated to any of the two zones. The serial port supports time-division multiplexing on each pin from 2 to 32 time slots. The DM642 has sufficient bandwidth to support all eight serial data pins transmitting a 192-kHz stereo signal. Serial data in each zone may be transmitted and received on multiple serial data pins simultaneously and formatted in a multitude of variations on the Philips Inter-IC Sound (I2S) format.

In addition, the McASP0 transmitter may be programmed to output multiple S/PDIF, IEC60958, AES-3, CP-430 encoded data channels simultaneously, with a single RAM containing the full implementation of user data and channel status fields.

McASP0 also provides extensive error-checking and recovery features, such as the bad clock detection circuit for each high-frequency master clock which verifies that the master clock is within a programmed frequency range.

The VCXO interpolated control (VIC) port provides digital-to-analog conversion with resolution from 9-bits to up to 16-bits. The output of the VIC is a single bit interpolated D/A output.For more details on the VIC port, see the TMS320C64x™ DSP Video Port/VCXO Interpolated Control (VIC) Port Reference Guide (literature number SPRU629).

The ethernet media access controller (EMAC) provides an efficient interface between the DM642 DSP core processor and the network. The DM642 EMAC support both 10Base-T and 100Base-TX, or 10 Mbits/second (Mbps) and 100 Mbps in either half- or full-duplex, with hardware flow control and quality of service (QOS) support. The DM642 EMAC makes use of a custom interface to the DSP core that allows efficient data transmission and reception.For more details on the EMAC, see the TMS320C6000 DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The management data input/output (MDIO) module continuously polls all 32 MDIO addresses in order to enumerate all PHY devices in the system. Once a PHY candidate has been selected by the DSP, the MDIO module transparently monitors its link state by reading the PHY status register. Link change events are stored in the MDIO module and can optionally interrupt the DSP, allowing the DSP to poll the link status of the device without continuously performing costly MDIO accesses. For more details on the MDIO, see the TMS320C6000™ DSP Ethernet Media Access Controller (EMAC) / Management Data Input/Output (MDIO) Module Reference Guide (literature number SPRU628).

The I2C0 port on the DM642 allows the DSP to easily control peripheral devices and communicate with a host processor. In addition, the standard multichannel buffered serial port (McBSP) may be used to communicate with serial peripheral interface (SPI) mode peripheral devices.

The DM642 has a complete set of development tools which includes: a new C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows® debugger interface for visibility into source code execution.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기2
유형 직함 날짜
* Data sheet Video/Imaging Point Digital Signal Processor datasheet (Rev. A) 2010/10/19
Application note Introduction to TMS320C6000 DSP Optimization 2011/10/06

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

디버그 프로브

TMDSEMU560V2STM-U — XDS560v2 시스템 추적 USB 디버그 프로브

XDS560v2는 디버그 프로브의 XDS560™ 제품군 중 최고의 성능을 가진 제품으로, 기존의 JTAG 표준(IEEE1149.1)과 cJTAG(IEEE1149.7)를 모두 지원합니다. SWD(직렬 와이어 디버그)는 지원하지 않습니다.

모든 XDS 디버그 프로브는 ETB(Embedded Trace Buffer)를 특징으로 하는 모든 ARM 및 DSP 프로세서에서 코어 및 시스템 추적을 지원합니다. 핀을 통한 추적의 경우 XDS560v2 PRO TRACE가 필요합니다.

XDS560v2는 MIPI HSPT 60핀 커넥터(TI 14핀, (...)

TI.com에서 구매할 수 없습니다
디버그 프로브

TMDSEMU560V2STM-UE — XDS560v2 시스템 추적 USB 및 이더넷 디버그 프로브

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

TI.com에서 구매할 수 없습니다
드라이버 또는 라이브러리

AEC-AER Acoustic echo cancellation/removal for TI C64x+, C674x, C55x and Cortex®-A8 processors

Voice Library - VoLIB provides components that, together, facilitate the development of the signal processing chain for Voice over IP applications such as infrastructure, enterprise, residential gateways and IP phones. Together with optimized implementations of ITU-T voice codecs, that can be (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Arm 기반 프로세서
66AK2G12 고성능 멀티코어 DSP+Arm -1x Arm A15 코어, 1x C66x DSP 코어
DSP(디지털 신호 프로세서)
DM505 비전 분석용 SoC 15mm 패키지 SM320C6201-EP 향상된 제품 C6201 고정 소수점 DSP SM320C6415 군사용 등급 C64x 고정 소수점 DSP SM320C6415-EP 향상된 제품 C6415 고정 소수점 DSP SM320C6424-EP EP(Enhanced Product) C6424 고정 소수점 DSP SM320C6455-EP EP(Enhanced Product) C6455 고정 소수점 DSP SM320C6472-HIREL 높은 안정성 제품 6 코어 C6472 고정 소수점 DSP SM320C6678-HIREL 고신뢰성 제품 고성능 8코어 C6678 고정 및 부동 소수점 DSP SM320C6701 군사용 애플리케이션을 위한 단일 코어 C67x 부동 소수점 DSP - 최대 167MHz SM320C6701-EP 향상된 제품 C6701 부동 소수점 DSP SM320C6711D-EP 향상된 제품 C6711D 부동 소수점 DSP SM320C6712D-EP 향상된 제품 C6712D DSP SM320C6713B-EP 향상된 제품 C6713 부동 소수점 DSP SM320C6727B 군사용 등급 C6727B 부동 소수점 DSP SM320C6727B-EP 향상된 제품 C6727 부동 소수점 DSP SM320DM642-HIREL 높은 안정성 제품 디지털 미디어 DM642 DSP SM32C6416T-EP 향상된 제품 C6416T 고정 소수점 DSP SMJ320C6201B 고정 소수점 디지털 신호 프로세서, 군사용 SMJ320C6203 군사용 등급 C62x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6415 군사용 등급 C64x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6701 군사용 등급 C67x 부동 소수점 DSP - 세라믹 패키지 SMJ320C6701-SP 우주 항공 등급 C6701 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V SMV320C6727B-SP 우주 항공 등급 C6727B 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V TMS320C5517 저전력 C55x 고정 소수점 DSP - 최대 200MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C5532 저전력 C55x 고정 소수점 DSP - 최대 100MHz TMS320C5533 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB TMS320C5534 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스 TMS320C5535 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C6201 고정소수점 디지털 신호 프로세서 TMS320C6202 고정소수점 디지털 신호 프로세서 TMS320C6202B C62x 고정 소수점 DSP - 최대 300MHz, 384KB TMS320C6203B C62x 고정 소수점 DSP - 최대 300MHz, 896KB TMS320C6204 고정소수점 디지털 신호 프로세서 TMS320C6205 고정소수점 디지털 신호 프로세서 TMS320C6211B C62x 고정 소수점 DSP - 최대 167MHz TMS320C6411 C64x 고정 소수점 DSP - 최대 300MHz, McBSP TMS320C6414 C64x 고정 소수점 DSP - 최대 720MHz, McBSP TMS320C6415 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI TMS320C6416 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI, VCP/TCP TMS320C6421Q C64x+ 고정 소수점 DSP - 최대 600MHz, 8비트 EMIFA, 16비트 DDR2 TMS320C6424Q C64x+ 고정 소수점 DSP - 최대 600MHz, 16/8비트 EMIFA, 32/16비트 DDR2 TMS320C6454 C64x+ 고정 소수점 DSP - 최대 1GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6457 통신 인프라 디지털 신호 프로세서 TMS320C6701 C67x 부동 소수점 DSP - 최대 167MHz, McBSP TMS320C6711D C67x 부동 소수점 DSP - 최대 250MHz, McBSP, 32비트 EMIFA TMS320C6712D C67x 부동 소수점 DSP - 최대 150MHz, McBSP, 16비트 EMIFA TMS320C6720 C67x 부동 소수점 DSP - 200MHz, McASP, 16비트 EMIFA TMS320C6722B C67x 부동 소수점 DSP - 최대 250MHz, McASP, 16비트 EMIFA TMS320C6726B C67x 부동 소수점 DSP - 최대 266MHz, McASP, 16비트 EMIFA TMS320C6727 C67x 부동 소수점 DSP - 최대 250MHz, McASP, 32비트 EMIFA TMS320C6727B C67x 부동 소수점 DSP - 최대 350MHz, McASP, 32비트 EMIFA TMS320C6743 저전력 C674x 부동 소수점 DSP - 375MHz TMS320C6745 저전력 C674x 부동 소수점 DSP - 456MHz, QFP TMS320C6747 저전력 C674x 부동 소수점 DSP - 456MHz, PBGA TMS320DM642Q 비디오/이미징 고정 소수점 디지털 신호 프로세서 TMS320DM6431Q 디지털 미디어 프로세서, 최대 2400MIPS, 300MHz 클럭 속도 TMS320DM6435Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, McASP 1개, McBSP 1개 TMS320DM6437Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, MCASP 1개, McBSP 2개 TMS320DM6441 DaVinci 디지털 미디어 시스템 온 칩 TMS320DM6467T 디지털 미디어 시스템 온 칩 TMS320DM647 디지털 미디어 프로세서
다운로드 옵션
드라이버 또는 라이브러리

C64X-DSPLIB Download TMS320C64x DSP Library

TMS320C6000 Digital Signal Processor Library (DSPLIB) is a platform-optimized DSP function library for C programmers. It includes C-callable, general-purpose signal-processing routines that are typically used in computationally intensive real-time applications. With these routines, higher (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Arm 기반 프로세서
OMAPL137-HT 고온 저전력 C674x 부동 소수점 DSP + Arm 프로세서 - 최대 456MHz OMAPL138B-EP 향상된 제품 저전력 C674x 부동 소수점 DSP + Arm9 프로세서 - 345MHz TMS320DM8127 DaVinci 디지털 미디어 프로세서
DSP(디지털 신호 프로세서)
SM320C6201-EP 향상된 제품 C6201 고정 소수점 DSP SM320C6415 군사용 등급 C64x 고정 소수점 DSP SM320C6415-EP 향상된 제품 C6415 고정 소수점 DSP SM320C6424-EP EP(Enhanced Product) C6424 고정 소수점 DSP SM320C6455-EP EP(Enhanced Product) C6455 고정 소수점 DSP SM320C6472-HIREL 높은 안정성 제품 6 코어 C6472 고정 소수점 DSP SM320C6678-HIREL 고신뢰성 제품 고성능 8코어 C6678 고정 및 부동 소수점 DSP SM320C6701 군사용 애플리케이션을 위한 단일 코어 C67x 부동 소수점 DSP - 최대 167MHz SM320C6701-EP 향상된 제품 C6701 부동 소수점 DSP SM320C6711D-EP 향상된 제품 C6711D 부동 소수점 DSP SM320C6712D-EP 향상된 제품 C6712D DSP SM320C6713B-EP 향상된 제품 C6713 부동 소수점 DSP SM320C6727B 군사용 등급 C6727B 부동 소수점 DSP SM320C6727B-EP 향상된 제품 C6727 부동 소수점 DSP SM320DM642-HIREL 높은 안정성 제품 디지털 미디어 DM642 DSP SM32C6416T-EP 향상된 제품 C6416T 고정 소수점 DSP SMJ320C6201B 고정 소수점 디지털 신호 프로세서, 군사용 SMJ320C6203 군사용 등급 C62x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6415 군사용 등급 C64x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6701 군사용 등급 C67x 부동 소수점 DSP - 세라믹 패키지 SMJ320C6701-SP 우주 항공 등급 C6701 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V SMV320C6727B-SP 우주 항공 등급 C6727B 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V TMS320C6201 고정소수점 디지털 신호 프로세서 TMS320C6202 고정소수점 디지털 신호 프로세서 TMS320C6202B C62x 고정 소수점 DSP - 최대 300MHz, 384KB TMS320C6203B C62x 고정 소수점 DSP - 최대 300MHz, 896KB TMS320C6204 고정소수점 디지털 신호 프로세서 TMS320C6205 고정소수점 디지털 신호 프로세서 TMS320C6211B C62x 고정 소수점 DSP - 최대 167MHz TMS320C6421Q C64x+ 고정 소수점 DSP - 최대 600MHz, 8비트 EMIFA, 16비트 DDR2 TMS320C6424Q C64x+ 고정 소수점 DSP - 최대 600MHz, 16/8비트 EMIFA, 32/16비트 DDR2 TMS320C6452 C64x+ 고정 소수점 DSP - 최대 900MHz, 1Gbps 이더넷 TMS320C6454 C64x+ 고정 소수점 DSP - 최대 1GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6455 C64x+ 고정 소수점 DSP - 최대 1.2GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6457 통신 인프라 디지털 신호 프로세서 TMS320C6701 C67x 부동 소수점 DSP - 최대 167MHz, McBSP TMS320C6711D C67x 부동 소수점 DSP - 최대 250MHz, McBSP, 32비트 EMIFA TMS320C6712D C67x 부동 소수점 DSP - 최대 150MHz, McBSP, 16비트 EMIFA TMS320C6720 C67x 부동 소수점 DSP - 200MHz, McASP, 16비트 EMIFA TMS320C6722B C67x 부동 소수점 DSP - 최대 250MHz, McASP, 16비트 EMIFA TMS320C6726B C67x 부동 소수점 DSP - 최대 266MHz, McASP, 16비트 EMIFA TMS320C6727 C67x 부동 소수점 DSP - 최대 250MHz, McASP, 32비트 EMIFA TMS320C6727B C67x 부동 소수점 DSP - 최대 350MHz, McASP, 32비트 EMIFA TMS320C6743 저전력 C674x 부동 소수점 DSP - 375MHz TMS320C6745 저전력 C674x 부동 소수점 DSP - 456MHz, QFP TMS320C6747 저전력 C674x 부동 소수점 DSP - 456MHz, PBGA
드라이버 또는 라이브러리

C67X-DSPLIB Download TMS320C67x DSP Library

TMS320C6000 Digital Signal Processor Library (DSPLIB) is a platform-optimized DSP function library for C programmers. It includes C-callable, general-purpose signal-processing routines that are typically used in computationally intensive real-time applications. With these routines, higher (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Arm 기반 프로세서
OMAPL137-HT 고온 저전력 C674x 부동 소수점 DSP + Arm 프로세서 - 최대 456MHz OMAPL138B-EP 향상된 제품 저전력 C674x 부동 소수점 DSP + Arm9 프로세서 - 345MHz TMS320DM8127 DaVinci 디지털 미디어 프로세서
DSP(디지털 신호 프로세서)
SM320C6201-EP 향상된 제품 C6201 고정 소수점 DSP SM320C6415 군사용 등급 C64x 고정 소수점 DSP SM320C6415-EP 향상된 제품 C6415 고정 소수점 DSP SM320C6424-EP EP(Enhanced Product) C6424 고정 소수점 DSP SM320C6455-EP EP(Enhanced Product) C6455 고정 소수점 DSP SM320C6472-HIREL 높은 안정성 제품 6 코어 C6472 고정 소수점 DSP SM320C6678-HIREL 고신뢰성 제품 고성능 8코어 C6678 고정 및 부동 소수점 DSP SM320C6701 군사용 애플리케이션을 위한 단일 코어 C67x 부동 소수점 DSP - 최대 167MHz SM320C6701-EP 향상된 제품 C6701 부동 소수점 DSP SM320C6711D-EP 향상된 제품 C6711D 부동 소수점 DSP SM320C6712D-EP 향상된 제품 C6712D DSP SM320C6713B-EP 향상된 제품 C6713 부동 소수점 DSP SM320C6727B 군사용 등급 C6727B 부동 소수점 DSP SM320C6727B-EP 향상된 제품 C6727 부동 소수점 DSP SM320DM642-HIREL 높은 안정성 제품 디지털 미디어 DM642 DSP SM32C6416T-EP 향상된 제품 C6416T 고정 소수점 DSP SMJ320C6201B 고정 소수점 디지털 신호 프로세서, 군사용 SMJ320C6203 군사용 등급 C62x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6415 군사용 등급 C64x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6701 군사용 등급 C67x 부동 소수점 DSP - 세라믹 패키지 SMJ320C6701-SP 우주 항공 등급 C6701 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V SMV320C6727B-SP 우주 항공 등급 C6727B 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V TMS320C6201 고정소수점 디지털 신호 프로세서 TMS320C6202 고정소수점 디지털 신호 프로세서 TMS320C6202B C62x 고정 소수점 DSP - 최대 300MHz, 384KB TMS320C6203B C62x 고정 소수점 DSP - 최대 300MHz, 896KB TMS320C6204 고정소수점 디지털 신호 프로세서 TMS320C6205 고정소수점 디지털 신호 프로세서 TMS320C6211B C62x 고정 소수점 DSP - 최대 167MHz TMS320C6421Q C64x+ 고정 소수점 DSP - 최대 600MHz, 8비트 EMIFA, 16비트 DDR2 TMS320C6424Q C64x+ 고정 소수점 DSP - 최대 600MHz, 16/8비트 EMIFA, 32/16비트 DDR2 TMS320C6452 C64x+ 고정 소수점 DSP - 최대 900MHz, 1Gbps 이더넷 TMS320C6454 C64x+ 고정 소수점 DSP - 최대 1GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6455 C64x+ 고정 소수점 DSP - 최대 1.2GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6457 통신 인프라 디지털 신호 프로세서 TMS320C6701 C67x 부동 소수점 DSP - 최대 167MHz, McBSP TMS320C6711D C67x 부동 소수점 DSP - 최대 250MHz, McBSP, 32비트 EMIFA TMS320C6712D C67x 부동 소수점 DSP - 최대 150MHz, McBSP, 16비트 EMIFA TMS320C6720 C67x 부동 소수점 DSP - 200MHz, McASP, 16비트 EMIFA TMS320C6722B C67x 부동 소수점 DSP - 최대 250MHz, McASP, 16비트 EMIFA TMS320C6726B C67x 부동 소수점 DSP - 최대 266MHz, McASP, 16비트 EMIFA TMS320C6727 C67x 부동 소수점 DSP - 최대 250MHz, McASP, 32비트 EMIFA TMS320C6727B C67x 부동 소수점 DSP - 최대 350MHz, McASP, 32비트 EMIFA TMS320C6743 저전력 C674x 부동 소수점 DSP - 375MHz TMS320C6745 저전력 C674x 부동 소수점 DSP - 456MHz, QFP TMS320C6747 저전력 C674x 부동 소수점 DSP - 456MHz, PBGA
드라이버 또는 라이브러리

FAXLIB FAX library (FAXLIB) for C66x, C64x+ and C55x processors

Voice Library - VoLIB provides components that, together, facilitate the development of the signal processing chain for Voice over IP applications such as infrastructure, enterprise, residential gateways and IP phones. Together with optimized implementations of ITU-T voice codecs, that can be (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Arm 기반 프로세서
66AK2G12 고성능 멀티코어 DSP+Arm -1x Arm A15 코어, 1x C66x DSP 코어
DSP(디지털 신호 프로세서)
DM505 비전 분석용 SoC 15mm 패키지 SM320C6201-EP 향상된 제품 C6201 고정 소수점 DSP SM320C6415 군사용 등급 C64x 고정 소수점 DSP SM320C6415-EP 향상된 제품 C6415 고정 소수점 DSP SM320C6424-EP EP(Enhanced Product) C6424 고정 소수점 DSP SM320C6455-EP EP(Enhanced Product) C6455 고정 소수점 DSP SM320C6472-HIREL 높은 안정성 제품 6 코어 C6472 고정 소수점 DSP SM320C6678-HIREL 고신뢰성 제품 고성능 8코어 C6678 고정 및 부동 소수점 DSP SM320C6701 군사용 애플리케이션을 위한 단일 코어 C67x 부동 소수점 DSP - 최대 167MHz SM320C6701-EP 향상된 제품 C6701 부동 소수점 DSP SM320C6711D-EP 향상된 제품 C6711D 부동 소수점 DSP SM320C6712D-EP 향상된 제품 C6712D DSP SM320C6713B-EP 향상된 제품 C6713 부동 소수점 DSP SM320C6727B 군사용 등급 C6727B 부동 소수점 DSP SM320C6727B-EP 향상된 제품 C6727 부동 소수점 DSP SM320DM642-HIREL 높은 안정성 제품 디지털 미디어 DM642 DSP SM32C6416T-EP 향상된 제품 C6416T 고정 소수점 DSP SMJ320C6201B 고정 소수점 디지털 신호 프로세서, 군사용 SMJ320C6203 군사용 등급 C62x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6415 군사용 등급 C64x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6701 군사용 등급 C67x 부동 소수점 DSP - 세라믹 패키지 SMJ320C6701-SP 우주 항공 등급 C6701 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V SMV320C6727B-SP 우주 항공 등급 C6727B 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V TMS320C5517 저전력 C55x 고정 소수점 DSP - 최대 200MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C5532 저전력 C55x 고정 소수점 DSP - 최대 100MHz TMS320C5533 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB TMS320C5534 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스 TMS320C5535 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C6201 고정소수점 디지털 신호 프로세서 TMS320C6202 고정소수점 디지털 신호 프로세서 TMS320C6202B C62x 고정 소수점 DSP - 최대 300MHz, 384KB TMS320C6203B C62x 고정 소수점 DSP - 최대 300MHz, 896KB TMS320C6204 고정소수점 디지털 신호 프로세서 TMS320C6205 고정소수점 디지털 신호 프로세서 TMS320C6211B C62x 고정 소수점 DSP - 최대 167MHz TMS320C6411 C64x 고정 소수점 DSP - 최대 300MHz, McBSP TMS320C6414 C64x 고정 소수점 DSP - 최대 720MHz, McBSP TMS320C6415 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI TMS320C6416 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI, VCP/TCP TMS320C6421Q C64x+ 고정 소수점 DSP - 최대 600MHz, 8비트 EMIFA, 16비트 DDR2 TMS320C6424Q C64x+ 고정 소수점 DSP - 최대 600MHz, 16/8비트 EMIFA, 32/16비트 DDR2 TMS320C6454 C64x+ 고정 소수점 DSP - 최대 1GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6457 통신 인프라 디지털 신호 프로세서 TMS320C6701 C67x 부동 소수점 DSP - 최대 167MHz, McBSP TMS320C6711D C67x 부동 소수점 DSP - 최대 250MHz, McBSP, 32비트 EMIFA TMS320C6712D C67x 부동 소수점 DSP - 최대 150MHz, McBSP, 16비트 EMIFA TMS320C6720 C67x 부동 소수점 DSP - 200MHz, McASP, 16비트 EMIFA TMS320C6722B C67x 부동 소수점 DSP - 최대 250MHz, McASP, 16비트 EMIFA TMS320C6726B C67x 부동 소수점 DSP - 최대 266MHz, McASP, 16비트 EMIFA TMS320C6727 C67x 부동 소수점 DSP - 최대 250MHz, McASP, 32비트 EMIFA TMS320C6727B C67x 부동 소수점 DSP - 최대 350MHz, McASP, 32비트 EMIFA TMS320C6743 저전력 C674x 부동 소수점 DSP - 375MHz TMS320C6745 저전력 C674x 부동 소수점 DSP - 456MHz, QFP TMS320C6747 저전력 C674x 부동 소수점 DSP - 456MHz, PBGA TMS320DM642Q 비디오/이미징 고정 소수점 디지털 신호 프로세서 TMS320DM6431Q 디지털 미디어 프로세서, 최대 2400MIPS, 300MHz 클럭 속도 TMS320DM6435Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, McASP 1개, McBSP 1개 TMS320DM6437Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, MCASP 1개, McBSP 2개 TMS320DM6441 DaVinci 디지털 미디어 시스템 온 칩 TMS320DM6467T 디지털 미디어 시스템 온 칩 TMS320DM647 디지털 미디어 프로세서
다운로드 옵션
드라이버 또는 라이브러리

VOLIB Voice library (VoLIB) for C66x, C64x+ and C55x processors

Voice Library - VoLIB provides components that, together, facilitate the development of the signal processing chain for Voice over IP applications such as infrastructure, enterprise, residential gateways and IP phones. Together with optimized implementations of ITU-T voice codecs, that can be (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
Arm 기반 프로세서
66AK2G12 고성능 멀티코어 DSP+Arm -1x Arm A15 코어, 1x C66x DSP 코어
DSP(디지털 신호 프로세서)
DM505 비전 분석용 SoC 15mm 패키지 SM320C6201-EP 향상된 제품 C6201 고정 소수점 DSP SM320C6415 군사용 등급 C64x 고정 소수점 DSP SM320C6415-EP 향상된 제품 C6415 고정 소수점 DSP SM320C6424-EP EP(Enhanced Product) C6424 고정 소수점 DSP SM320C6455-EP EP(Enhanced Product) C6455 고정 소수점 DSP SM320C6472-HIREL 높은 안정성 제품 6 코어 C6472 고정 소수점 DSP SM320C6678-HIREL 고신뢰성 제품 고성능 8코어 C6678 고정 및 부동 소수점 DSP SM320C6701 군사용 애플리케이션을 위한 단일 코어 C67x 부동 소수점 DSP - 최대 167MHz SM320C6701-EP 향상된 제품 C6701 부동 소수점 DSP SM320C6711D-EP 향상된 제품 C6711D 부동 소수점 DSP SM320C6712D-EP 향상된 제품 C6712D DSP SM320C6713B-EP 향상된 제품 C6713 부동 소수점 DSP SM320C6727B 군사용 등급 C6727B 부동 소수점 DSP SM320C6727B-EP 향상된 제품 C6727 부동 소수점 DSP SM320DM642-HIREL 높은 안정성 제품 디지털 미디어 DM642 DSP SM32C6416T-EP 향상된 제품 C6416T 고정 소수점 DSP SMJ320C6201B 고정 소수점 디지털 신호 프로세서, 군사용 SMJ320C6203 군사용 등급 C62x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6415 군사용 등급 C64x 고정 소수점 DSP - 세라믹 패키지 SMJ320C6701 군사용 등급 C67x 부동 소수점 DSP - 세라믹 패키지 SMJ320C6701-SP 우주 항공 등급 C6701 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V SMV320C6727B-SP 우주 항공 등급 C6727B 부동 소수점 DSP - 세라믹 패키지를 지원하는 방사능 내성 클래스 V TMS320C5517 저전력 C55x 고정 소수점 DSP - 최대 200MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C5532 저전력 C55x 고정 소수점 DSP - 최대 100MHz TMS320C5533 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB TMS320C5534 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스 TMS320C5535 저전력 C55x 고정 소수점 DSP - 최대 100MHz, USB, LCD 인터페이스, FFT HWA, SAR ADC TMS320C6201 고정소수점 디지털 신호 프로세서 TMS320C6202 고정소수점 디지털 신호 프로세서 TMS320C6202B C62x 고정 소수점 DSP - 최대 300MHz, 384KB TMS320C6203B C62x 고정 소수점 DSP - 최대 300MHz, 896KB TMS320C6204 고정소수점 디지털 신호 프로세서 TMS320C6205 고정소수점 디지털 신호 프로세서 TMS320C6211B C62x 고정 소수점 DSP - 최대 167MHz TMS320C6411 C64x 고정 소수점 DSP - 최대 300MHz, McBSP TMS320C6414 C64x 고정 소수점 DSP - 최대 720MHz, McBSP TMS320C6415 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI TMS320C6416 C64x 고정 소수점 DSP - 최대 720MHz, McBSP, PCI, VCP/TCP TMS320C6421Q C64x+ 고정 소수점 DSP - 최대 600MHz, 8비트 EMIFA, 16비트 DDR2 TMS320C6424Q C64x+ 고정 소수점 DSP - 최대 600MHz, 16/8비트 EMIFA, 32/16비트 DDR2 TMS320C6454 C64x+ 고정 소수점 DSP - 최대 1GHz, 64비트 EMIFA, 32/16비트 DDR2, 1Gbps 이더넷 TMS320C6457 통신 인프라 디지털 신호 프로세서 TMS320C6701 C67x 부동 소수점 DSP - 최대 167MHz, McBSP TMS320C6711D C67x 부동 소수점 DSP - 최대 250MHz, McBSP, 32비트 EMIFA TMS320C6712D C67x 부동 소수점 DSP - 최대 150MHz, McBSP, 16비트 EMIFA TMS320C6720 C67x 부동 소수점 DSP - 200MHz, McASP, 16비트 EMIFA TMS320C6722B C67x 부동 소수점 DSP - 최대 250MHz, McASP, 16비트 EMIFA TMS320C6726B C67x 부동 소수점 DSP - 최대 266MHz, McASP, 16비트 EMIFA TMS320C6727 C67x 부동 소수점 DSP - 최대 250MHz, McASP, 32비트 EMIFA TMS320C6727B C67x 부동 소수점 DSP - 최대 350MHz, McASP, 32비트 EMIFA TMS320C6743 저전력 C674x 부동 소수점 DSP - 375MHz TMS320C6745 저전력 C674x 부동 소수점 DSP - 456MHz, QFP TMS320C6747 저전력 C674x 부동 소수점 DSP - 456MHz, PBGA TMS320DM642Q 비디오/이미징 고정 소수점 디지털 신호 프로세서 TMS320DM6431Q 디지털 미디어 프로세서, 최대 2400MIPS, 300MHz 클럭 속도 TMS320DM6435Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, McASP 1개, McBSP 1개 TMS320DM6437Q 디지털 미디어 프로세서, 최대 4800MIPS, 600MHz 클록 속도, MCASP 1개, McBSP 2개 TMS320DM6441 DaVinci 디지털 미디어 시스템 온 칩 TMS320DM6467T 디지털 미디어 시스템 온 칩 TMS320DM647 디지털 미디어 프로세서
다운로드 옵션
설계 툴

PROCESSORS-3P-SEARCH — Arm 기반 MPU, arm 기반 MCU 및 DSP 타사 검색 툴

TI는 여러 회사와의 협력을 통해 TI 프로세서를 사용하여 광범위한 소프트웨어, 툴 및 SOM을 제공해서 생산 단계로 가는 속도를 높이고 있습니다. 이 검색 툴을 다운로드하여 타사 솔루션을 빠르게 검색하고 필요에 맞는 올바른 타사를 찾아보세요. 여기에 나열된 소프트웨어, 툴 및 모듈은 텍사스 인스트루먼트가 아닌 독립적인 타사에서 생산 및 관리하고 있습니다.

검색 툴은 다음과 같이 제품 유형별로 분류되어 있습니다.

  • 툴에는 IDE/컴파일러, 디버그 및 추적, 시뮬레이션 및 모델링 소프트웨어, 플래시 프로그래머가 포함되어 있습니다.
  • OS에는 (...)
패키지 다운로드
OMFCBGA (ZDK) 548 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상