首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

BUF634A

現行

210 MHz、250mA 高速緩衝器

立即訂購
產品規格表

BUF634A

現行
產品規格表 立即訂購

產品詳細資料

Architecture Fixed Gain/Buffer Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 240 BW at Acl (MHz) 210 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3750 Vn at flatband (typ) (nV√Hz) 3.4 Vn at 1 kHz (typ) (nV√Hz) 3.4 Iq per channel (typ) (mA) 8.5 Vos (offset voltage at 25°C) (max) (mV) 60 Rail-to-rail No Features Adjustable BW/IQ/IOUT Rating Catalog Operating temperature range (°C) -40 to 125 Input bias current (max) (pA) 1600000 Offset drift (typ) (µV/°C) 175 Iout (typ) (mA) 250 2nd harmonic (dBc) -77 3rd harmonic (dBc) -79 Frequency of harmonic distortion measurement (MHz) 0.02
Architecture Fixed Gain/Buffer Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 240 BW at Acl (MHz) 210 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3750 Vn at flatband (typ) (nV√Hz) 3.4 Vn at 1 kHz (typ) (nV√Hz) 3.4 Iq per channel (typ) (mA) 8.5 Vos (offset voltage at 25°C) (max) (mV) 60 Rail-to-rail No Features Adjustable BW/IQ/IOUT Rating Catalog Operating temperature range (°C) -40 to 125 Input bias current (max) (pA) 1600000 Offset drift (typ) (µV/°C) 175 Iout (typ) (mA) 250 2nd harmonic (dBc) -77 3rd harmonic (dBc) -79 Frequency of harmonic distortion measurement (MHz) 0.02
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 SOIC (D) 8 29.4 mm² 4.9 x 6 VSON (DRB) 8 9 mm² 3 x 3
  • Pin-Selected Bandwidth: 35 MHz to 210 MHz
  • High Output Current: 250 mA
  • Slew Rate: 3750 V/µs
  • Low Quiescent Current: 1.5 mA (35-MHz BW)
  • Wide Supply Range: ±2.25 V to ±18 V
  • Internal Output Current Limit
  • Thermal Shutdown Protection
  • Available in Packages with Thermal Pad
  • Extended Temperature Operation: –40°C to +125°C
  • Pin-Selected Bandwidth: 35 MHz to 210 MHz
  • High Output Current: 250 mA
  • Slew Rate: 3750 V/µs
  • Low Quiescent Current: 1.5 mA (35-MHz BW)
  • Wide Supply Range: ±2.25 V to ±18 V
  • Internal Output Current Limit
  • Thermal Shutdown Protection
  • Available in Packages with Thermal Pad
  • Extended Temperature Operation: –40°C to +125°C

The BUF634A device is a high-performance, high-fidelity, open-loop buffer that is capable of driving 250 mA of output current. The BUF634A is a 36-V device with an adjustable bandwidth of 35 MHz to 210 MHz, which is accomplished by varying the value of an external resistor between the V– and BW pins.

The BUF634A device can be used as a standalone open-loop driver, or used inside the feedback loop of a precision op amp to provide both high-precision and large output current drive with improved capacitive load drive.

For low-power applications, the BUF634A device operates on a 1.5-mA quiescent current with a 250-mA output, 3750-V/µs slew rate, and 35-MHz bandwidth. The device consumes 8.5-mA quiescent current in wide-bandwidth mode with a 210-MHz bandwidth. The BUF634A is fully protected by an internal current limit in its output stage and by thermal shutdown, making the device rugged and easy to use.

The BUF634A device is rated to function over the extended industrial temperature range of –40°C to +125°C. The BUF634A comes in three packages: D (SOIC), DRB (VSON), and DDA (HSOIC). The DRB (VSON) and DDA (HSOIC) packages have excellent thermal performance resulting from the thermal pad on the bottom side. The DRB package comes in a very small form factor of 3.0 mm × 3.0 mm, making the device a very suitable option for portable and size-constrained applications.

The BUF634A device is a high-performance, high-fidelity, open-loop buffer that is capable of driving 250 mA of output current. The BUF634A is a 36-V device with an adjustable bandwidth of 35 MHz to 210 MHz, which is accomplished by varying the value of an external resistor between the V– and BW pins.

The BUF634A device can be used as a standalone open-loop driver, or used inside the feedback loop of a precision op amp to provide both high-precision and large output current drive with improved capacitive load drive.

For low-power applications, the BUF634A device operates on a 1.5-mA quiescent current with a 250-mA output, 3750-V/µs slew rate, and 35-MHz bandwidth. The device consumes 8.5-mA quiescent current in wide-bandwidth mode with a 210-MHz bandwidth. The BUF634A is fully protected by an internal current limit in its output stage and by thermal shutdown, making the device rugged and easy to use.

The BUF634A device is rated to function over the extended industrial temperature range of –40°C to +125°C. The BUF634A comes in three packages: D (SOIC), DRB (VSON), and DDA (HSOIC). The DRB (VSON) and DDA (HSOIC) packages have excellent thermal performance resulting from the thermal pad on the bottom side. The DRB package comes in a very small form factor of 3.0 mm × 3.0 mm, making the device a very suitable option for portable and size-constrained applications.
open-in-new 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
類型 標題 日期
* Data sheet BUF634A 36-V, 210-MHz, 250-mA Output, High-Speed Buffer datasheet (Rev. F) PDF | HTML 2021年 5月 18日
Application note BUF634A and BUF634 Thermal Performance Comparison PDF | HTML 2021年 10月 18日
Application brief Optimizing LCR Meter Front-End Design for Accurate Impedance Measurements PDF | HTML 2021年 1月 20日
EVM User's guide BUF634Axxx Evaluation Module User's Guide PDF | HTML 2020年 12月 22日
Certificate BUF634ADDAEVM EU Declaration of Conformity (DoC) 2020年 8月 3日
Certificate BUF634ADRBEVM EU Declaration of Conformity (DoC) 2020年 8月 3日
Application brief Pairing up Op Amp and Buffer for Higher Output Power Plus Speed in ATE 2019年 6月 7日
EVM User's guide BUF634AD Evaluation module 2019年 2月 18日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BUF634ADDAEVM — 210-MHz、250-mA 高速緩衝器評估模組

The BUF634ADDAEVM is an evaluation module (EVM) for the BUF634A high-speed buffer in the DDA (8-pin SO8 w/thermal pad) package. The BUF634ADDAEVM features two BUF634AIDDA devices and is designed to quickly demonstrate the functionality and versatility of the buffer. Optionally, the buffers can be (...)
使用指南: PDF | HTML
TI.com 無法提供
開發板

BUF634ADEVM — BUF634AD 高速緩衝器評估模組

The BUF634ADEVM is an evaluation module (EVM) for the BUF634A high-speed buffer in the D (8-pin SOIC) package. The BUF634ADEVM features two BUF634A devices and is designed to quickly demonstrate the functionality and versatility of the buffer. Optionally, the buffers can be configured as outputs (...)
使用指南: PDF
TI.com 無法提供
開發板

BUF634ADRBEVM — 250-mA 高速緩衝器評估模組

The BUF634ADRBEVM is an evaluation module (EVM) for the BUF634A high-speed buffer in the DRB (8-pin DFN) package. The BUF634ADRBEVM features two BUF634AIDRB devices and is designed to quickly demonstrate the functionality and versatility of the buffer. Optionally, the buffers can be configured as (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

BUF634A TINA-TI SPICE Model (Rev. B)

SBOMAY2B.TSC (17 KB) - TINA-TI Spice Model
下載
模擬型號

BUF634A for PSPICE Library (Rev. A)

SBOMB63A.ZIP (30 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
檢視選項
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即進行設計
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
參考設計

TIDA-060029 — LCR 測試儀類比前端參考設計

This reference design, TIDA-060029 demonstrates an analog signal chain solution for LCR Meter applications using an auto balancing impedance measurement method.
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
HSOIC (DDA) 8 檢視選項
SOIC (D) 8 檢視選項
VSON (DRB) 8 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片