DRV5053-Q1
- Linear Output Hall Sensor
- AEC-Q100 Qualified for Automotive Applications
- Grade 1: TA = –40 to 125°C (Q, see Figure 17)
- Grade 0: TA = –40 to 150°C (E, see Figure 17)
- Superior Temperature Stability
- Sensitivity ±10% Over Temperature
- High Sensitivity Options:
- –11 mV/mT (OA, See Figure 17)
- –23 mV/mT (PA)
- –45 mV/mT (RA)
- –90 mV/mT (VA)
- +23 mV/mT (CA)
- +45 mV/mT (EA)
- Supports a Wide Voltage Range
- 2.7 to 38 V
- No External Regulator Required
- Amplified Output Stage
- 2.3-mA Sink, 300 µA Source
- Output Voltage: 0.2 ~ 1.8 V
- B = 0 mT, OUT = 1 V
- Fast Power-On: 35 µs
- Small Package and Footprint
- Surface Mount 3-Pin SOT-23 (DBZ)
- 2.92 mm × 2.37 mm
- Through-Hole 3-Pin TO-92 (LPG)
- 4.00 mm × 3.15 mm
- Surface Mount 3-Pin SOT-23 (DBZ)
- Protection Features
- Reverse Supply Protection (up to –22 V)
- Supports up to 40-V Load Dump
- Output Short-Circuit Protection
- Output Current Limitation
- OUT Short to Battery Protection
The DRV5053-Q1 device is a chopper-stabilized Hall IC that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.
The 0- to 2-V analog output responds linearly to the applied magnetic flux density, and distinguishes the polarity of magnetic field direction. A wide operating voltage range from 2.7 to 38 V with reverse polarity protection up to –22 V makes the device suitable for a wide range of automotive and consumer applications.
Internal protection functions are provided for reverse supply conditions, load dump, and output short circuit or overcurrent.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | DRV5053-Q1 Automotive Analog-Bipolar Hall Effect Sensor datasheet (Rev. A) | PDF | HTML | 2015年 12月 30日 |
Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023年 12月 5日 | |
User guide | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023年 12月 4日 | |
Application note | Understanding and Applying Hall Effect Sensor Data Sheets (Rev. A) | PDF | HTML | 2021年 12月 7日 | |
Application brief | Incremental Rotary Encoders (Rev. B) | PDF | HTML | 2021年 12月 2日 | |
Application note | Linear Hall-Effect Sensor Angle Measurement Theory, Implementation... (Rev. B) | PDF | HTML | 2021年 11月 5日 | |
Application brief | Hall-Effect Sensors in Low-Power Applications (Rev. B) | PDF | HTML | 2021年 10月 15日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組
SLIC027 — DRV5055-ANGLE-EVM MSP Flasher Batch File
支援產品和硬體
產品
線性霍爾效應感測器
硬體開發
開發板
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
支援產品和硬體
產品
多軸線性與角度位置感測器
線性霍爾效應感測器
霍爾效應鎖存器和開關
硬體開發
開發板
軟體
計算工具
SLIC020 — DRV5053 Calculator
支援產品和硬體
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. The tool has device emulation and supports various magnet shapes, grades and motion types.
支援產品和硬體
產品
霍爾效應鎖存器和開關
線性霍爾效應感測器
多軸線性與角度位置感測器
硬體開發
軟體
計算工具
TIDA-00420 — ADC 架構、數位隔離、廣泛輸入、16 通道、AC/DC 二進位輸入參考設計
封裝 | 引腳 | 下載 |
---|---|---|
SOT-23 (DBZ) | 3 | 檢視選項 |
TO-92 (LPG) | 3 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。