LM393-MIL
- Single-Supply or Dual Supplies
- Wide Range of Supply Voltage
- Maximum Rating: 2 V to 36 V
- Tested to 30 V
- Low Supply-Current Drain Independent of Supply
Voltage: 0.4 mA (Typical) Per Comparator - Low Input Bias Current: 25 nA (Typical)
- Low Input Offset Voltage: 2 mV (Typical)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V - Low Output Saturation Voltage
- Output Compatible with TTL, MOS, and CMOS
- On Products Compliant to MIL-PRF-38535, All Parameters are Tested Unless Otherwise Noted.
On All Other Products, Production Processing does not Necessarily Include Testing of All Parameters.
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM393-MIL device is characterized for operation from 0°C to 70°C.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LM393-MIL Dual Differential Comparators datasheet | PDF | HTML | 2017年 6月 13日 |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 | ||
Application note | Designing Overcurrent protection for TPL7407L Peripheral Driver | 2014年 11月 5日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
參考設計
TIDA-00782 — 使用 DLP® 技術的可攜式、高亮度 HD 投影顯示參考設計
This reference design, featuring the DLP Pico™ 0.45-inch WXGA display chipset enables use of HD resolution for projection display applications such as accessory projectors, smart projectors, mobile Smart TV, built in projectors like projection functionality inside notebooks, laptops and hot (...)
參考設計
PMP6023 — 適用於筒燈、格柵燈和模組的 25W、100-264VAC 輸入、0-10V 可調光 LED 驅動器
This is an isolated, 25W, 0-10V dimmable LED driver design with >0.9 power factor (PF) which meets or exceeds commercial lighting PF and total harmonic distortion (THD) requirements. It is well suited for integral LED luminaires, or ballasts, that use high-brightness LED emitters. (...)
參考設計
PMP6712 — 適用 PoE 供電設備 (PSE) 的雙通道全橋式轉換器參考設計 (54 V @ 30 A)
This is a phase-shifted full-bridge converter reference design capable of delivering 1600 W of isolated output power and achieving efficiency of greater than 96%. This design uses the UCC28950 controller in a dual-phase primary/secondary configuration. An LM5017 constant on-time synchronous buck (...)
封裝 | 引腳 | 下載 |
---|---|---|
DIESALE (Y) | — |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點