LM5036

現行

具有整合式輔助偏壓電源和調整預偏壓啟動功能的半橋 PWM 控制器

產品詳細資料

Operating temperature range (°C) -40 to 125 Control mode Feedforward Topology Full bridge, Half bridge, Push pull Rating Catalog Duty cycle (max) (%) 50
Operating temperature range (°C) -40 to 125 Control mode Feedforward Topology Full bridge, Half bridge, Push pull Rating Catalog Duty cycle (max) (%) 50
WQFN (RJB) 28 25 mm² 5 x 5
  • High integration controller for small form factor, high-density DC-DC power converters
  • Integrated 100-V, 100-mA auxiliary bias supply
  • Fully regulated pre-biased start-up
  • Enhanced cycle-by-cycle current limiting with pulse matching for low and high primary FETs
  • Optimized maximum duty cycle for primary-side FETs
  • Voltage-mode control with input voltage feed-forward
  • 100-V high-voltage start-up regulator
  • Configurable latch, OVP operation
  • Integrated 100-V, 2-A MOSFET drivers for primary-side FETs
  • Programmable dead-time between primary-side and synchronous rectifier (SR) FETs
  • Create a custom design using the LM5036 with the Excel Calculator Tool or WEBENCH Power Designer
  • High integration controller for small form factor, high-density DC-DC power converters
  • Integrated 100-V, 100-mA auxiliary bias supply
  • Fully regulated pre-biased start-up
  • Enhanced cycle-by-cycle current limiting with pulse matching for low and high primary FETs
  • Optimized maximum duty cycle for primary-side FETs
  • Voltage-mode control with input voltage feed-forward
  • 100-V high-voltage start-up regulator
  • Configurable latch, OVP operation
  • Integrated 100-V, 2-A MOSFET drivers for primary-side FETs
  • Programmable dead-time between primary-side and synchronous rectifier (SR) FETs
  • Create a custom design using the LM5036 with the Excel Calculator Tool or WEBENCH Power Designer

The LM5036 PWM controller, with integrated auxiliary bias supply, offers high power density for industrial isolated power applications. It contains all the features necessary to implement half-bridge power converters, using voltage-mode control, with input voltage feed-forward. This controller is intended to operate on the primary side of an isolated converter with DC input voltage up to 100 V. The controller includes features that improve power density and reliability while reducing system cost:

  • An integrated fly-buck converter as auxiliary bias supply. Provides bias power for both primary and secondary circuits, with a minimum of external components.
  • Fully regulated pre-bias start-up. Eliminates output voltage over-shoot or dips even when starting into a pre-charged output capacitor.
  • Enhanced cycle-by-cycle peak current limit with pulse matching. The controller limits both positive and negative current. Pulse matching ensures equal pulse width for low and high side devices, to avoid transformer saturation. Output current limit is approximately constant across the full range of input voltage.

The LM5036 PWM controller, with integrated auxiliary bias supply, offers high power density for industrial isolated power applications. It contains all the features necessary to implement half-bridge power converters, using voltage-mode control, with input voltage feed-forward. This controller is intended to operate on the primary side of an isolated converter with DC input voltage up to 100 V. The controller includes features that improve power density and reliability while reducing system cost:

  • An integrated fly-buck converter as auxiliary bias supply. Provides bias power for both primary and secondary circuits, with a minimum of external components.
  • Fully regulated pre-bias start-up. Eliminates output voltage over-shoot or dips even when starting into a pre-charged output capacitor.
  • Enhanced cycle-by-cycle peak current limit with pulse matching. The controller limits both positive and negative current. Pulse matching ensures equal pulse width for low and high side devices, to avoid transformer saturation. Output current limit is approximately constant across the full range of input voltage.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
LM5039 現行 具進階電流限制的半橋式 PWM 控制器 Lower 1ku price

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet LM5036 Half-Bridge PWM Controller with Integrated Auxiliary Bias Supply datasheet (Rev. C) PDF | HTML 2021年 10月 10日
EVM User's guide LM5036EVM-294 Evaluation Module 2018年 3月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

LM5036 PSpice Transient Model

SNVMBP8.ZIP (1687 KB) - PSpice Model
模擬型號

LM5036 SIMPLIS Transient

SNVMBI1.ZIP (137 KB) - SIMPLIS Model
計算工具

SLUC654 LM5036 Design Calculator

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC controllers (external FET)
LM5036 具有整合式輔助偏壓電源和調整預偏壓啟動功能的半橋 PWM 控制器
參考設計

PMP40500 — 54-VDC 輸入、12-V 42-A 輸出半橋參考設計

此 12-V、42-A 輸出半橋式參考設計適合有線網路園區與分公司交換器中的匯流排轉換器。此設計具高效率及各種故障保護 (過電流和短路)。設計採用 3 kVRMS 基本及功能隔離式閘極驅動器 UCC21220D、UCC21220AD、UCC21222D,及 5.7-kRMS 強化隔離式閘極驅動器 UCC21540D、UCC21540DWK 及 UCC21541DW 以提供效率比較。
Test report: PDF
電路圖: PDF
封裝 引腳 下載
WQFN (RJB) 28 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片