首頁 電源管理 AC/DC & DC/DC controllers (external FET)
首頁
電源管理
AC/DC & DC/DC controllers (external FET)

LM5176-Q1

現行

通過 AEC-Q100 驗證的 55V 寬輸入電壓同步 4 開關降壓/升壓控制器

立即訂購
產品規格表

LM5176-Q1

現行
產品規格表 立即訂購

產品詳細資料

Vin (min) (V) 4.2 Vin (max) (V) 55 Operating temperature range (°C) -40 to 125 Topology Buck-Boost Rating Automotive Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.002 Duty cycle (max) (%) 100
Vin (min) (V) 4.2 Vin (max) (V) 55 Operating temperature range (°C) -40 to 125 Topology Buck-Boost Rating Automotive Vout (min) (V) 0.8 Vout (max) (V) 55 Iq (typ) (A) 0.002 Duty cycle (max) (%) 100
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: -40°C to 125°C TA
  • Functional Safety-Capable
  • Single inductor buck-boost controller for step-up/step-down DC/DC conversion
  • Wide VIN: 4.2 V (2.5 V with bias) to 55 V (60 V maximum)
  • Flexible VOUT: 0.8 V to 55 V
  • VOUT short protection
  • High efficiency buck-boost transition
  • Adjustable switching frequency
  • Optional frequency sync and dithering
  • Integrated 2-A MOSFET gate drivers
  • Cycle-by-cycle current limit and optional hiccup
  • Optional input or output average current limiting
  • Programmable input UVLO and soft-start
  • Power good and output overvoltage protection
  • Available in HTSSOP-28 package
  • Create a custom design using the LM5176-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: -40°C to 125°C TA
  • Functional Safety-Capable
  • Single inductor buck-boost controller for step-up/step-down DC/DC conversion
  • Wide VIN: 4.2 V (2.5 V with bias) to 55 V (60 V maximum)
  • Flexible VOUT: 0.8 V to 55 V
  • VOUT short protection
  • High efficiency buck-boost transition
  • Adjustable switching frequency
  • Optional frequency sync and dithering
  • Integrated 2-A MOSFET gate drivers
  • Cycle-by-cycle current limit and optional hiccup
  • Optional input or output average current limiting
  • Programmable input UVLO and soft-start
  • Power good and output overvoltage protection
  • Available in HTSSOP-28 package
  • Create a custom design using the LM5176-Q1 with the WEBENCH Power Designer

The LM5176-Q1 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5176-Q1 operates over a wide input voltage range of 4.2 V to 55 V (60 V absolute maximum) to support a variety of applications.

The LM5176-Q1 employs current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.

The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5176-Q1 features optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.

The LM5176-Q1 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5176-Q1 operates over a wide input voltage range of 4.2 V to 55 V (60 V absolute maximum) to support a variety of applications.

The LM5176-Q1 employs current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.

The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5176-Q1 features optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.
open-in-new 尋找其它 AC/DC & DC/DC controllers (external FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet LM5176-Q1 55-V Wide VIN Synchronous 4-Switch Buck-Boost Controller datasheet (Rev. B) PDF | HTML 2021年 8月 13日
Application note Bidirectional TEC Driver Design for 40-W TEC PDF | HTML 2023年 6月 2日
Functional safety information LM5176 and LM5176-Q1 Functional Safety, FIT Rate, Failure FMD 2020年 5月 22日
Application note LM5176 Power Sharing Between Two Parallel, Four-Switch Buck-Boost Converters 2018年 7月 16日
White paper An overview of radiated EMI specifications for power supplies 2018年 6月 5日
White paper An overview of conducted EMI specifications for power supplies 2018年 2月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5176EVM-HP — LM5176 寬輸入電壓降壓/升壓控制器評估模組

The LM5176EVM-HP demonstrates a flexible high power buck-boost design using the LM5176 wide-vin buck-boost controller. The evaluation module is configured to operate from an input voltage range of 6V-36V and to provide a regulated 12-V output with up to 12A of load current.
使用指南: PDF
TI.com 無法提供
模擬型號

LM5176 PSpice Transient Model (Rev. B)

SNVMBA4B.ZIP (147 KB) - PSpice Model
下載
模擬型號

LM5176 PSpice Transient Model (Rev. C)

SNVMBA4C.ZIP (120 KB) - PSpice Model
下載
計算工具

SNVC208 — LM5176 Design Calculator

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC controllers (external FET)
LM34936-Q1 — 車用 30V 寬輸入電壓同步 4 開關降壓/升壓控制器 LM5176 — 55V 大範圍 VIN 同步降 4 開關降壓升壓控制器 LM5176-Q1 — 通過 AEC-Q100 驗證的 55V 寬輸入電壓同步 4 開關降壓/升壓控制器
下載
參考設計

PMP31052 — 車用四開關 > 300-W 降壓升壓參考設計

此參考設計為一使用 LM5176-Q1 控制器 IC 的汽車四開關降壓升壓轉換器電路。電源供應器可升壓及降壓輸入電壓。此設計接受 4.5 V 至 27 V 的輸入電壓，並提供 12 V 的穩壓輸出，其可依據啟動層級、啟動時間、熱介面與最高環境溫度來提供，最高可達 30 A。

此設計的目的在於將單一功率級強制轉為最大輸出電流。

Test report: PDF
封裝 引腳 下載
HTSSOP (PWP) 28 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片