首頁 電源管理 電源開關 理想二極體/ORing 控制器
首頁
電源管理
電源開關
理想二極體/ORing 控制器

LM74700-Q1

現行

3.2V 至 65V、80-uA IQ 車用理想二極體控制器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
最新 LM74700D-Q1 現行 車用 3.2-V 至 70-V、80-µA 反向電池保護理想二極體控制器 Newer device with higher absolute maximum rating and SOIC package

LM74700-Q1

現行
產品規格表 立即訂購

產品詳細資料

Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Automotive load dump compatibility, Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.08 Iq (max) (mA) 0.13 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 11000 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.3 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -11 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Ideal diode controller Product type Ideal diode controller
Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Automotive load dump compatibility, Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.08 Iq (max) (mA) 0.13 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 11000 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.3 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -11 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Ideal diode controller Product type Ideal diode controller
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8 SOT-23-THN (DDF) 8 8.12 mm² 2.9 x 2.8
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • 20-mV ANODE to CATHODE forward voltage drop regulation
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA operating quiescent current (EN=High)
  • 2.3-A peak gate turnoff current
  • Fast response to reverse current blocking: < 0.75 µs
  • Meets automotive ISO7637 transient requirements with a suitable TVS Diode
  • Available in 6-pin and 8-pin SOT-23 Package 2.90 mm × 1.60 mm
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • 20-mV ANODE to CATHODE forward voltage drop regulation
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA operating quiescent current (EN=High)
  • 2.3-A peak gate turnoff current
  • Fast response to reverse current blocking: < 0.75 µs
  • Meets automotive ISO7637 transient requirements with a suitable TVS Diode
  • Available in 6-pin and 8-pin SOT-23 Package 2.90 mm × 1.60 mm

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V.

The device controls the GATE of the MOSFET to regulate the forward voltage drop at 20 mV. The regulation scheme enables graceful turn off of the MOSFET during a reverse current event and ensures zero DC reverse current flow. Fast response (< 0.75 µs) to Reverse Current Blocking makes the device suitable for systems with output voltage holdup requirements during ISO7637 pulse testing as well as power fail and input micro-short conditions.

The LM74700-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74700-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current.

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V.

The device controls the GATE of the MOSFET to regulate the forward voltage drop at 20 mV. The regulation scheme enables graceful turn off of the MOSFET during a reverse current event and ensures zero DC reverse current flow. Fast response (< 0.75 µs) to Reverse Current Blocking makes the device suitable for systems with output voltage holdup requirements during ISO7637 pulse testing as well as power fail and input micro-short conditions.

The LM74700-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74700-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current.
open-in-new 尋找其它 理想二極體/ORing 控制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
LM74500-Q1 現行 反向極性保護控制器 3.2-V to 65-V, 80-µA IQ automotive reverse polarity protection controller
LM74700-EP 現行 強化型低 IQ 理想二極體控制器 Enhanced product version, -55 C to 125 C operation
功能相同，但引腳輸出與所比較的產品不同
LM74701-Q1 現行 具有整合式 VDS 箝位的車用 3.2-V 至 65-V 反向電池保護理想二極體控制器 Next generation input TVSless ideal diode controller improving system size and cost
LM74720-Q1 現行 具有主動式整流與負載突降保護的車用、低 IQ 理想二極體控制器 Next generation ideal diode controller with ultra-low on IQ.
功能相似於所比較的產品
最新 LM74703-Q1 現行 具有 FET 良好輸出的車用理想二極體控制器 Similar device with FET good output
最新 LM74704-Q1 現行 具有 FET 良好開漏輸出的車用理想二極體控制器 Similar device with FET good output
LM7480-Q1 現行 用於驅動背對背 NFET 的 3V 至 65V、車用理想二極體控制器 3-V to 65-V, automotive ideal diode controller driving back to back NFETs supporting reverse polarity, reverse current and over-voltage protection

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet LM74700-Q1 Low IQ Reverse Battery Protection Ideal Diode Controller datasheet (Rev. G) PDF | HTML 2020年 12月 21日
Application brief Full-Featured Automotive Side Mirror PDF | HTML 2024年 3月 15日
Analog Design Journal 適合使用理想二極體控制器的汽車應用備援電源拓撲 PDF | HTML 2024年 2月 15日
Analog Design Journal Multibattery management in medical ultrasound systems (Rev. B) PDF | HTML 2023年 6月 8日
Application brief Implementation of Test Pulses in Digital Output Modules PDF | HTML 2022年 3月 4日
Application note Basics of Ideal Diodes (Rev. B) PDF | HTML 2021年 10月 5日
Certificate Automotive PPAP Documentation 2021年 6月 18日
EVM User's guide LM74700DDFEVM: Evaluation Module for LM74700-Q1 PDF | HTML 2020年 12月 10日
Technical article Meet airline restrictions with power-path control for dual batteries PDF | HTML 2020年 7月 21日
White paper 簡化汽車及工業領域的功 能安全認證 2020年 6月 9日
Functional safety information LM74700-Q1 Functional Safety FIT Rate and Failure Mode Distribution 2019年 12月 16日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Application note Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
User guide LM74700 Evaluation Module (Rev. A) 2019年 2月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM74700DDFEVM — LM74700-Q1 3.2-V 至 65-V、80-μA IQ 車用理想二極體控制器 (DDF 封裝) 評估模組

The LM74700DDFEVM helps designers evaluate the operation and performance of the LM74700-Q1 3.2-V to 65-V, 80-μA IQ automotive ideal diode controller (DDF package). This evaluation module demonstrates how an N-channel power MOSFET can emulate a very-low forward voltage diode with low IQ and (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

LM74700EVM — LM74700 評估模組

The LM74700EVM helps designers evaluate the operation and performance of the LM74700-Q1 smart diode controller. This evaluation module demonstrates how an N-channel power MOSFET can emulate a very-low forward voltage diode with low IQ and low-leakage current flowing through the IC.
使用指南: PDF
TI.com 無法提供
模擬型號

LM74700-Q1 PSpice Transient Model

SNOM667.ZIP (64 KB) - PSpice Model
下載
模擬型號

LM74700-Q1 TINA-TI Transient Model

SNOM691.TSC (149 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求

許多 TI 參考設計包含 LM74700-Q1

使用我們的參考設計選擇工具，以檢視並找出最適合您的應用和參數的設計。

檢視參考設計
封裝 引腳 下載
SOT-23 (DBV) 6 檢視選項
SOT-23-THN (DDF) 8 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片