首頁 電源管理 DC/DC power modules Power modules (integrated inductor)
首頁
電源管理
DC/DC power modules
Power modules (integrated inductor)

LMZ13610

現行

具 36V 最大輸入電壓的 10A SIMPLE SWITCHER® 電源模組

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
TPSM63610 現行 採用 7.5-mm x 6.5-mm 強化型 HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、8-A 電源模組 Significantly smaller footprint, lower EMI, higher efficiency and optional spread spectrum.

LMZ13610

現行
產品規格表 立即訂購

產品詳細資料

Iout (max) (A) 10 Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 6 Vout (min) (V) 0.8 Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Inverting Buck-Boost, Synchronous Buck Features EMI Tested, Enable, Tracking Control mode Peak current mode Switching frequency (max) (Hz) 404000 Switching frequency (min) (Hz) 314000
Iout (max) (A) 10 Vin (max) (V) 36 Vin (min) (V) 6 Vout (max) (V) 6 Vout (min) (V) 0.8 Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Inverting Buck-Boost, Synchronous Buck Features EMI Tested, Enable, Tracking Control mode Peak current mode Switching frequency (max) (Hz) 404000 Switching frequency (min) (Hz) 314000
TO-PMOD (NDY) 11 266.85 mm² 15 x 17.79
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Fixed Switching Frequency (350 kHz)
  • Flexible Start-up Sequencing Using External Soft-
    Start, Tracking and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Junction Temperature Range –40°C to 125°C
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fully Enabled for WEBENCH® Power Designer
  • Pin Compatible With LMZ22010/08,
    LMZ12010/08, LMZ23610/08/06H, and
    LMZ13608/06H
  • Performance Benefits
    • High Efficiency Reduces System Heat
      Generation
    • Low Radiated Emissions (EMI) Tested to
      EN55022 Class B Standard
    • Only 7 External Components
    • Low Output Voltage Ripple
    • No External Heat Sink Required
  • Electrical Specifications
    • 50-W Maximum Total Output Power
    • Up to 10-A Output Current
    • Input Voltage Range 6 V to 36 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%(1)
  • Integrated Shielded Inductor
  • Simple PCB Layout
  • Fixed Switching Frequency (350 kHz)
  • Flexible Start-up Sequencing Using External Soft-
    Start, Tracking and Precision Enable
  • Protection Against Inrush Currents and Faults
    Such as Input UVLO and Output Short Circuit
  • Junction Temperature Range –40°C to 125°C
  • Single Exposed Pad and Standard Pinout for Easy
    Mounting and Manufacturing
  • Fully Enabled for WEBENCH® Power Designer
  • Pin Compatible With LMZ22010/08,
    LMZ12010/08, LMZ23610/08/06H, and
    LMZ13608/06H
  • Performance Benefits
    • High Efficiency Reduces System Heat
      Generation
    • Low Radiated Emissions (EMI) Tested to
      EN55022 Class B Standard
    • Only 7 External Components
    • Low Output Voltage Ripple
    • No External Heat Sink Required
  • Electrical Specifications
    • 50-W Maximum Total Output Power
    • Up to 10-A Output Current
    • Input Voltage Range 6 V to 36 V
    • Output Voltage Range 0.8 V to 6 V
    • Efficiency up to 92%(1)

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ13610 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6 V and 36 V and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ13610 only requires two external resistors and three external capacitors to complete the power solution. The LMZ13610 is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output over-voltage protection, short circuit protection, output current limit, and allows start-up into a prebiased output.

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ13610 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6 V and 36 V and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ13610 only requires two external resistors and three external capacitors to complete the power solution. The LMZ13610 is a reliable and robust design with the following protection features: thermal shutdown, input undervoltage lockout, output over-voltage protection, short circuit protection, output current limit, and allows start-up into a prebiased output.
open-in-new 尋找其它 Power modules (integrated inductor)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet LMZ13610 10-A SIMPLE SWITCHER Power Module With 36-V Maximum Input Voltage datasheet (Rev. G) PDF | HTML 2015年 11月 9日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016年 1月 20日
Application note AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013年 5月 6日
User guide AN-2134 LMZ13610/8/6 and LMZ12010/8/6 Evaluation Board (Rev. C) 2013年 4月 24日
EVM User's guide AN-2136 LMZ13610/8/6 and LMZ12010/8/6 Demo Board (Rev. B) 2013年 4月 24日
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013年 4月 23日
Application note AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013年 4月 23日
Application note AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013年 4月 23日
Application note AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013年 4月 23日
Application note Understanding and Applying Current-Mode Control Theory 2007年 8月 19日
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMZ13610DEMO — 36V Simple Switcher® 模組 10A 展示板

The LMZ13610 SIMPLE SWITCHER® power module is an easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610 can accept an input voltage rail between 6V and 36V. (...)

TI.com 無法提供
開發板

LMZ13610EVAL — 36V Simple Switcher® 模組 10A 評估板

The LMZ13610/8 and LMZ12010/8 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610/8 can accept an input voltage rail (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LMZ13610 Load_Transient TINA-TI Transient Reference Design

SNVMAG6.TSC (103 KB) - TINA-TI Reference Design
下載
模擬型號

LMZ13610 TINA-TI Average Reference Design

SNVMAH0.TSC (87 KB) - TINA-TI Reference Design
下載
模擬型號

LMZ13610 TINA-TI Average Spice Model

SNVMAG9.ZIP (8 KB) - TINA-TI Spice Model
下載
模擬型號

LMZ13610 TINA-TI Transient Spice Model

SNVMAG5.ZIP (16 KB) - TINA-TI Spice Model
下載
模擬型號

LMZ13610 Unencrypted PSpice Average Model

SNVM761.ZIP (1 KB) - PSpice Model
下載
模擬型號

LMZ13610 Unencrypted PSpice Average Model Package (Rev. A)

SNVM251A.ZIP (47 KB) - PSpice Model
下載
模擬型號

LMZ13610 Unencrypted PSpice Transient Model

SNVM760.ZIP (2 KB) - PSpice Model
下載
模擬型號

LMZ13610 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM252A.ZIP (159 KB) - PSpice Model
下載
模擬型號

LMZ13610_Startup TINA-TI Reference Design

SNVMAG7.TSC (123 KB) - TINA-TI Reference Design
下載
模擬型號

LMZ13610_Steady_state TINA-TI Reference Design

SNVMAG8.TSC (136 KB) - TINA-TI Reference Design
下載
封裝 引腳 下載
TO-PMOD (NDY) 11 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片