首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)
首頁
電源管理
DC/DC 電源模組
電源模組 (整合式電感器)

TPSM63610

現行

採用 7.5-mm x 6.5-mm 強化型 HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、8-A 電源模組

立即訂購
產品規格表

TPSM63610

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Iout (max) (A) 8 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 20 Vout (min) (V) 1 Topology Synchronous Buck Features EMI Tested, Enable, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum Control mode Peak-Current Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 200000
Rating Catalog Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Iout (max) (A) 8 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 20 Vout (min) (V) 1 Topology Synchronous Buck Features EMI Tested, Enable, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum Control mode Peak-Current Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 200000
B3QFN (RDF) 22 48.75 mm² 7.5 x 6.5
  • Functional Safety-Capable
  • Versatile 36-VIN, 8-AOUT synchronous buck module
    • Integrated MOSFETs, inductor, and controller
    • Adjustable output voltage from 1 V to 20 V
    • 6.5-mm × 7.5-mm × 4-mm overmolded package
    • –40°C to 125°C junction temperature range
    • Frequency adjustable from 200 kHz to 2.2 MHz
    • Negative output voltage capability
  • Ultra-high efficiency across the full load range
    • Peak efficiency of 95%+
    • External bias option for improved efficiency
    • Exposed pad for low thermal impedance. EVM θJA = 18.2 °C/W.
    • Shutdown quiescent current of 0.6 µA (typical)
  • Ultra-low conducted and radiated EMI signatures
    • Low-noise package with dual input paths and integrated capacitors reduces switch ringing
    • Resistor-adjustable switch-node slew rate
    • Meets CISPR 11 and 32 Class B emissions
  • Designed for scalable power supplies
    • Pin compatible with the TPSM63608 (36 V, 6 A)
  • Inherent protection features for robust design
    • Precision enable input and open-drain PGOOD indicator for sequencing, control, and VIN UVLO
    • Overcurrent and thermal shutdown protections
  • Create a custom design using the TPSM63610 with the WEBENCH Power Designer
  • Functional Safety-Capable
  • Versatile 36-VIN, 8-AOUT synchronous buck module
    • Integrated MOSFETs, inductor, and controller
    • Adjustable output voltage from 1 V to 20 V
    • 6.5-mm × 7.5-mm × 4-mm overmolded package
    • –40°C to 125°C junction temperature range
    • Frequency adjustable from 200 kHz to 2.2 MHz
    • Negative output voltage capability
  • Ultra-high efficiency across the full load range
    • Peak efficiency of 95%+
    • External bias option for improved efficiency
    • Exposed pad for low thermal impedance. EVM θJA = 18.2 °C/W.
    • Shutdown quiescent current of 0.6 µA (typical)
  • Ultra-low conducted and radiated EMI signatures
    • Low-noise package with dual input paths and integrated capacitors reduces switch ringing
    • Resistor-adjustable switch-node slew rate
    • Meets CISPR 11 and 32 Class B emissions
  • Designed for scalable power supplies
    • Pin compatible with the TPSM63608 (36 V, 6 A)
  • Inherent protection features for robust design
    • Precision enable input and open-drain PGOOD indicator for sequencing, control, and VIN UVLO
    • Overcurrent and thermal shutdown protections
  • Create a custom design using the TPSM63610 with the WEBENCH Power Designer

Deriving from a family of synchronous buck modules, the TPSM63610 is a highly integrated 36-V, 8-A DC/DC design that combines power MOSFETs, a shielded inductor, and passives in an enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 20 V, the TPSM63610 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total design requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63610 device offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum for improved EMI. Along with integrated VCC, bootstrap and input capacitors for increased reliability and higher density. The device can be configured for constant switching frequency over the full load current range (FPWM), or variable frequency (PFM) for higher light load efficiency. Including a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

Deriving from a family of synchronous buck modules, the TPSM63610 is a highly integrated 36-V, 8-A DC/DC design that combines power MOSFETs, a shielded inductor, and passives in an enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 20 V, the TPSM63610 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total design requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63610 device offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum for improved EMI. Along with integrated VCC, bootstrap and input capacitors for increased reliability and higher density. The device can be configured for constant switching frequency over the full load current range (FPWM), or variable frequency (PFM) for higher light load efficiency. Including a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.
open-in-new 尋找其它 電源模組 (整合式電感器)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的產品
TPSM63610E 現行 高密度、36-V 輸入、1-V 至 20-V 輸出、8-A 電源模組 Extended cold temperature range
引腳對引腳的功能與所比較的產品相同
TLVM13610 現行 採用 7.5-mm x 6.5-mm HotRod™ QFN 封裝的 36-V 輸入、1-V 至 10-V 輸出、8-A 電源模組 Reduced feature set and output voltage range
TPSM63608 現行 採用 7.5-mm x 6.5-mm HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、6-A 電源模組 Lower output current

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
類型 標題 日期
* Data sheet TPSM63610 High-Density, 3-V to 36-V Input, 1-V to 20-V Output , 8-A (10-A Peak) Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package datasheet (Rev. A) PDF | HTML 2023年 12月 13日
Application note Soldering Considerations for Power Modules (Rev. C) PDF | HTML 2024年 3月 14日
Application note Dynamic Output Voltage Control Using TPSM63610 for USB Type-C Applications PDF | HTML 2023年 12月 14日
Application note Using the TPSM636xx for an Inverting Buck-Boost Application PDF | HTML 2023年 10月 11日
Application note How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023年 8月 16日
EVM User's guide TPSM63610EVM Buck Regulator Evaluation Module's User's Guide (Rev. A) PDF | HTML 2022年 10月 31日
Functional safety information TPSM63608 and TPSM63610/E Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2022年 10月 12日
Certificate TPSM63610EVM EU RoHS Declaration of Conformity (DoC) 2022年 8月 9日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM63610EVM — 適用於 36-V 輸入、1-V 至 20-V、8-A 輸出降壓電源模組的 TPSM63610 評估板

此評估模組 (EVM) 可透過跨接器和測試點簡化 TPSM63610 電源模組的評估，以即時配置和測試裝置功能。除了評估裝置的電氣性能外，此 EVM 也可做為 TPSM63610 運用至終端使用者應用領域的電路設計與配置範例。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPSM63610 PSPICE Transient Model

SLVMDZ4.ZIP (269 KB) - PSpice Model
下載
CAD/CAE 符號

TPSM63610EVM Design Files

SLVRBM6.ZIP (3938 KB)
下載
計算工具

TPSM63610-DESIGN-CALC — TPSM63610 power module quickstart design tool

The TPSM6310 quick-start calculator is a standalone tool that facilitates and assists the power-supply engineer with the design of a DC/DC buck regulator based on a family of synchronous buck power modules, including TPSM6310, TPSM63610E and TPSM63608. The user can quickly arrive at an optimized (...)

支援產品和硬體

支援產品和硬體

產品
電源模組 (整合式電感器)
TPSM63608 — 採用 7.5-mm x 6.5-mm HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、6-A 電源模組 TPSM63610 — 採用 7.5-mm x 6.5-mm 強化型 HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、8-A 電源模組 TPSM63610E — 高密度、36-V 輸入、1-V 至 20-V 輸出、8-A 電源模組
下載
封裝 引腳 下載
B3QFN (RDF) 22 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片