TCA8424
支援中斷和 128 鍵的 24 位元 1.65 至 3.6-V 1MHz I2C/SMBus 鍵盤掃描儀
TCA8424
- Operating Power-Supply Voltage Range of 1.65V to 3.6V
- Supports FM+ I2C Operation up to 1MHz
- Can Support up to 128 (8x16) Key Scan
- Internal Power-On-Reset
- Open Drain Open Drain Active Low INT Output
- Noise Filter on SCL/SDA and Inputs
- Open Drain Outputs Can Sink up to 12mA Current for LED
- Hardware Coded HID and REPORT Descriptors
- Available With Preprogrammed Keyboard Map
- Software Reset per HID Over I2C Standard
- Internal Pull-up Resistors Make Implementation Easy
With no Need for External Components - HID Over I2C Commands Supported
- RESET
- GET REPORT
- SET REPORT
- SET POWER
- Fixed Length 8-byte INPUT Report can Detect up to 6
Simultaneous Key Presses Excluding Modifiers (CTRL, ALT,
SHIFT) - INPUT Report Generated on Key Press and Release
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 1000-V Human-Body Model (A114-A)
This 128 key scan device is specifically targeted towards end equipment that runs on Windows 8 operating system. The device is fully compliant with the HID over I2C specification defined (ver 1.0) defined by Microsoft. The HID and report descriptors are hard coded into the device so that they don’t need to be programmed at production. The device also comes with a preprogrammed keyboard map that is compatible with most standard laptop/notebook keyboards. However, the device also available without a pre-programmed keyboard, so that any keyboard map may be written into it at production.
The device generates INPUT reports of standard 8-byte length with the 1st byte being the modifier byte. After the keyboard map is programmed into the device it automatically recognizes the row/column location of the modifier keys based on their usage code. It is capable of detecting and reporting up to six simultaneous key presses plus eight modifiers. It generates an input report on each key press and each key release.
The device also supports LED indicators that are standard on a keyboard. Different variations support 2,4 or 8 LED outputs. Each output has open drain architecture and is capable of sinking up to 12mA of current. The LEDs are controlled by a standard OUTPUT report as described in the HID over I2C standard.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | Low-Voltage 8x16 Keyboard Scanner With HID over I2C Compliant Interface datasheet | 2013年 3月 27日 | |
Selection guide | I2C Infographic Flyer | 2015年 12月 3日 | ||
Application note | Understanding the I2C Bus | PDF | HTML | 2015年 6月 30日 | |
Application note | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015年 5月 15日 | ||
Application note | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015年 2月 13日 | |
Application note | OTP Creation Guide | 2013年 3月 27日 | ||
EVM User's guide | TCA8424 Evaluation Module User's Guide | 2013年 2月 22日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TCA8424EVM-038 — TCA8424EVM-038
The TCA8424 EVM showcases the capabilities and benefits of using the TCA8424 in a keyboard scanner application. This EVM is designed to allow the user to program their own OTPs and then test the OTP in a system use case.
SCDC004 — TCA8424 GUI
支援產品和硬體
產品
I2C 通用 I/O (GPIO)
硬體開發
開發板
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 引腳 | 下載 |
---|---|---|
VQFN (RHA) | 40 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點