首頁 放大器 運算放大器 (op amps) 高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

THS3202

不推薦在新設計中採用

2GHz 電流回饋放大器

立即訂購
產品規格表
THS3202 不建議用於新設計
儘管為了支援以前的設計而繼續生產此項產品，但我們並不建議用在新設計上。考量下列其中一項替代產品：
open-in-new 比較替代產品
功能相似於所比較的產品
THS3491 現行 900-MHz 高功率輸出電流回饋放大器 This current feedback amplifier (CFA) provides a new level of performance for applications requiring the lowest distortion at high output power levels from DC through values greater than 100 MHz at 100-Ω loads

THS3202

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 2000 BW at Acl (MHz) 2000 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 9000 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 15 Vos (offset voltage at 25°C) (max) (mV) 4 Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 69 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 70 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 2000 BW at Acl (MHz) 2000 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 9000 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 15 Vos (offset voltage at 25°C) (max) (mV) 4 Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 69 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 70 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 10
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Unity-Gain Bandwidth: 2 GHz
  • High Slew Rate: 9000 V/µs
  • High Output Current: ±115 mA into 20 RL
  • Power-Supply Voltage Range: 6.6 V to 15 V
  • APPLICATIONS
    • High-Speed Signal Processing
    • Test and Measurement Systems
    • High-Voltage ADC Preamplifier
    • RF and IF Amplifier Stages
    • Professional Video
  • Unity-Gain Bandwidth: 2 GHz
  • High Slew Rate: 9000 V/µs
  • High Output Current: ±115 mA into 20 RL
  • Power-Supply Voltage Range: 6.6 V to 15 V
  • APPLICATIONS
    • High-Speed Signal Processing
    • Test and Measurement Systems
    • High-Voltage ADC Preamplifier
    • RF and IF Amplifier Stages
    • Professional Video

The THS3202 is a dual current-feedback amplifier developed with BiCOM-II technology. Designed for low distortion with a high slew rate of 9000 V/µs, the THS320x family is ideally suited for applications driving loads sensitive to distortion at high frequencies.

The THS3202 provides well-regulated ac performance characteristics with power supplies ranging from single-supply 6.6-V operation up to a 15-V supply. The high unity-gain bandwidth of up to
2 GHz is a major contributor to the excellent distortion performance. The THS3202 offers an output current drive of ±115 mA and a low differential gain and phase error that make it suitable for applications such as video line drivers.

The THS3202 is available in an SOIC-8, an MSOP-8, and an MSOP-8 with PowerPAD packages.

The THS3202 is a dual current-feedback amplifier developed with BiCOM-II technology. Designed for low distortion with a high slew rate of 9000 V/µs, the THS320x family is ideally suited for applications driving loads sensitive to distortion at high frequencies.

The THS3202 provides well-regulated ac performance characteristics with power supplies ranging from single-supply 6.6-V operation up to a 15-V supply. The high unity-gain bandwidth of up to
2 GHz is a major contributor to the excellent distortion performance. The THS3202 offers an output current drive of ±115 mA and a low differential gain and phase error that make it suitable for applications such as video line drivers.

The THS3202 is available in an SOIC-8, an MSOP-8, and an MSOP-8 with PowerPAD packages.
open-in-new 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet 2-GHz Low Distortion, Dual Current-Feedback Amplifiers datasheet (Rev. F) 2010年 1月 14日
Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日
EVM User's guide THS3202EVM User's Guide 2002年 10月 11日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

THS3202EVM — THS3202 評估模組

The THS3202EVM provides a platform for developing dual amplifier circuits on the same board. The user needs only add power, input signal, and test instruments to operate the EVM. The user can change the feedback and gain resistors to change the gains.

The default configuration is:

  • Channel 1: Gain = (...)
使用指南: PDF
TI.com 無法提供
模擬型號

THS3202 ADS Model

SLOJ178.ZIP (21 KB) - Spice Model
下載
模擬型號

THS3202 PSpice Model

SLOJ164.ZIP (5 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
檢視選項
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即進行設計
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
HVSSOP (DGN) 8 檢視選項
SOIC (D) 8 檢視選項
VSSOP (DGK) 8 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片