TL4581
- Equivalent Input Noise Voltage 5 nV/Hz Typ at 1 kHz
- Unity-Gain Bandwidth . . . 10 MHz Typ
- High Slew Rate ...9 V/µs Typ
- Peak-to-Peak Output Voltage Swing 32 V Typ, With VCC± = ±18 V and RL = 600
- Wide Supply-Voltage Range . . . ±3 V to ±20 V
- Common-Mode Rejection Ratio . . . 100 dB Typ
- High dc Voltage Gain . . . 100 V/mV Typ
- Applications: Audio PreAmps, Active Filters, Headphone Amps
- End Equipment: DVD/CD/CDRW Players; Set Top Boxes
The TL4581 is a dual operational amplifier that has been designed optimally for audio applications, such as improving tone control. It offers low noise, high-gain bandwidth, good slew, and high output current drive for driving capacitive loads. These features make the TL4581 ideally suited for audio applications, such as audio preamps and active filters. When high output current is required, the TL4581 also can be used as a headphone amplifier.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TL4581 datasheet (Rev. A) | 2003年 3月 14日 | |
E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017年 3月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DIP-ADAPTER-EVM — DIP 轉接器評估模組
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
DUAL-DIYAMP-EVM — 雙通道通用自製 (DIY) 放大器電路評估模組
ANALOG-ENGINEER-CALC — 類比工程師計算機
CIRCUIT060013 — 具有 T 網路回饋電路的反相放大器
CIRCUIT060074 — 具有比較器電路的高壓側電流感測
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 引腳 | 下載 |
---|---|---|
SOIC (D) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點