首頁 電源管理 LED 驅動器 汽車 LED 驅動器
首頁
電源管理
LED 驅動器
汽車 LED 驅動器

TLC6C5716-Q1

現行

汽車 16 通道完整診斷定電流 RGB LED 驅動器

立即訂購
產品規格表

TLC6C5716-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 16 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 0.8 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
Number of channels 16 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 0.8 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
HTSSOP (DAP) 38 101.25 mm² 12.5 x 8.1
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 16 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • Two Output Groups: OUTRn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction (DC) for Each Channel
    • 8-Bit Brightness Control (BC) for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection (LOD), LED-Short Detection (LSD), Output Short-to-GND Detection (OSD)
    • Adjacent-Pin Short (APS) Detection
    • Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)
    • IREF Resistor Open- (IOF) and Short-Detection (ISF) and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 16 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • Two Output Groups: OUTRn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction (DC) for Each Channel
    • 8-Bit Brightness Control (BC) for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection (LOD), LED-Short Detection (LSD), Output Short-to-GND Detection (OSD)
    • Adjacent-Pin Short (APS) Detection
    • Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)
    • IREF Resistor Open- (IOF) and Short-Detection (ISF) and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5716-Q1 device is an automotive 16-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5716-Q1 device supplies a maximum of 50-mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group.

A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through 1 serial interface.

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5716-Q1 device is an automotive 16-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5716-Q1 device supplies a maximum of 50-mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group.

A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through 1 serial interface.
open-in-new 尋找其它 汽車 LED 驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
TLC6C5724-Q1 現行 汽車 24 通道完整診斷定電流 RGB LED 驅動器 TLC6C5724-Q1 and TLC6C5716-Q1 are hardware and software compatible

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TLC6C5716-Q1 Automotive 16-Channel, Full Diagnostics, Constant-Current LED Driver datasheet (Rev. A) PDF | HTML 2018年 8月 20日
Functional safety information TLC6C5716-Q1 Functional Safety, FIT Rate, and Failure Mode Distribution PDF | HTML 2023年 2月 23日
EVM User's guide TLC6C5716-Q1 Evaluation Module User's Guide 2018年 5月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLC6C5716EVM — TLC6C5716-Q1 16 通道定電流 LED 驅動器評估模組

The TLC6C5716EVM is designed to be controlled with the TLC65716EVM GUI via a USB2ANY communication tool. The TLC6C5716EVM can be powered by a micro-USB supply with a PC USB port. The TLC6C5716EVM GUI is designed to demonstrate the TLC6C5716-Q1 features.
使用指南: PDF
TI.com 無法提供
開發模組 (EVM) 的 GUI

SLVC724 — TLC6C5716EVM GUI

支援產品和硬體

支援產品和硬體

產品
汽車 LED 驅動器
TLC6C5716-Q1 — 汽車 16 通道完整診斷定電流 RGB LED 驅動器
硬體開發
開發板
TLC6C5716EVM — TLC6C5716-Q1 16 通道定電流 LED 驅動器評估模組
下載
模擬型號

TLC6C5716-Q1 PSpice Transient Model

SLVMCI7.ZIP (170 KB) - PSpice Model
下載
模擬型號

TLC6C5716-Q1 Unencrypted PSpice Transient Model

SLVMCI8.ZIP (23 KB) - PSpice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDA-020010 — 具有 HMI 的車用 HVAC 控制參考設計

This reference design offers a cost-effective solution for a heating, ventilation, and air conditioning (HVAC) human-machine interface (HMI) application. This reference design incorporates a synchronous step-down converter, multiple channel half-bridge motor driver for brushed DC motors (BDC), (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-020001 — 車用 144 區局部調光背光參考設計

This local dimming backlight reference design conserves power, extends the life of liquid-crystal displays (LCDs), and enhances automotive display quality through high dynamic range (HDR) or localized dimming technology. Seven multi-channel constant-current LED drivers allow for 144-zone localized (...)
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
HTSSOP (DAP) 38 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片