首頁 放大器 比較器
首頁
放大器
比較器

TLV6700

現行

具整合參考的低功耗窗型比較器

立即訂購
產品規格表

TLV6700

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 18 Vs (max) (V) 18 Vs (min) (V) 1.8 Vos (offset voltage at 25°C) (max) (mV) 2 Iq per channel (typ) (mA) 0.006 Input bias current (±) (max) (nA) 15 Rail-to-rail In to V- Rating Catalog Operating temperature range (°C) -40 to 125 Features Hysteresis, Internal Reference VICR (max) (V) 6.5 VICR (min) (V) 0 TI functional safety category Functional Safety-Capable
Number of channels 2 Output type Open-collector, Open-drain Propagation delay time (µs) 18 Vs (max) (V) 18 Vs (min) (V) 1.8 Vos (offset voltage at 25°C) (max) (mV) 2 Iq per channel (typ) (mA) 0.006 Input bias current (±) (max) (nA) 15 Rail-to-rail In to V- Rating Catalog Operating temperature range (°C) -40 to 125 Features Hysteresis, Internal Reference VICR (max) (V) 6.5 VICR (min) (V) 0 TI functional safety category Functional Safety-Capable
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8 WSON (DSE) 6 2.25 mm² 1.5 x 1.5
  • Wide supply voltage range: 1.8 V to 18 V
  • Adjustable threshold: down to 400 mV
  • High threshold accuracy:
    • 0.5% Max at 25°C
    • 1.0% Max overtemperature
  • Low quiescent current: 5.5 µA (Typ)
  • Open-drain outputs
  • Internal hysteresis: 5.5 mV (Typ)
  • Temperature range: –40°C to 125°C
  • Package:
    • Thin SOT-23-6
    • WSON-6
  • Wide supply voltage range: 1.8 V to 18 V
  • Adjustable threshold: down to 400 mV
  • High threshold accuracy:
    • 0.5% Max at 25°C
    • 1.0% Max overtemperature
  • Low quiescent current: 5.5 µA (Typ)
  • Open-drain outputs
  • Internal hysteresis: 5.5 mV (Typ)
  • Temperature range: –40°C to 125°C
  • Package:
    • Thin SOT-23-6
    • WSON-6

The TLV6700 is a high voltage window comparator that operates over a 1.8 V to 18 V range. The device has two high-accuracy comparators with an internal 400-mV reference and two open-drain outputs rated to 18 V. The TLV6700 can be used as a window comparator or as two independent comparators; the monitored voltage can be set with the use of external resistors.

OUTA is driven low when the voltage at INA+ drops below (VITP – VHYS), and goes high when the voltage returns above the respective threshold (VITP). OUTB is driven low when the voltage at INB– rises above VITP, and goes high when the voltage drops below the respective threshold (VITP – VHYS). Both comparators in the TLV6700 include built-in hysteresis to reject brief glitches, thereby ensuring stable output operation without false triggering.

The TLV6700 is available in a Thin SOT-23-6 and a leadless WSON-6; all package variants are specified over the junction temperature range of –40°C to 125°C.

The TLV6700 is a high voltage window comparator that operates over a 1.8 V to 18 V range. The device has two high-accuracy comparators with an internal 400-mV reference and two open-drain outputs rated to 18 V. The TLV6700 can be used as a window comparator or as two independent comparators; the monitored voltage can be set with the use of external resistors.

OUTA is driven low when the voltage at INA+ drops below (VITP – VHYS), and goes high when the voltage returns above the respective threshold (VITP). OUTB is driven low when the voltage at INB– rises above VITP, and goes high when the voltage drops below the respective threshold (VITP – VHYS). Both comparators in the TLV6700 include built-in hysteresis to reject brief glitches, thereby ensuring stable output operation without false triggering.

The TLV6700 is available in a Thin SOT-23-6 and a leadless WSON-6; all package variants are specified over the junction temperature range of –40°C to 125°C.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的產品
TLV6710 現行 具有整合參考的低功耗高電壓窗型比較器 36-V drop-in alternative
引腳對引腳的功能與所比較的產品相同
TLV6700-Q1 現行 具整合參考的車用低功耗窗口比較器 Automotive version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TLV6700 Micropower, 18-V Window Comparator With 400-mV Reference datasheet (Rev. B) PDF | HTML 2019年 11月 4日
Application brief Voltage Supervision with a Comparator PDF | HTML 2023年 9月 28日
Functional safety information TLV6700 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA 2021年 8月 19日
Circuit design Window comparator with integrated reference circuit 2018年 12月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TLV6700 and TLV6700-Q1 PSpice Model (Rev. A)

SNVMC71A.ZIP (146 KB) - PSpice Model
下載
模擬型號

TLV6700 and TLV6700-Q1 TINA-TI Macro and Reference Design (Rev. B)

SNVMC70B.ZIP (10 KB) - TINA-TI Reference Design
下載
設計工具

CIRCUIT060080 — 具有整合式參考電路的窗型比較器

此電路利用 TLV6710，其中包含兩個比較器和 400 mV 的精密內部參考。監控電壓 (VMON) 由 R1、R2 和 R3 分壓。跨 R2 和 R3 的電壓與 400 mV 內部參考電壓 (VREF) 相比較。如果輸入訊號 (VMON) 在窗口內，則輸出爲高電位。如果訊號位準超出窗口範圍，則輸出為低電位。此範例會採用 TLV6710，其中方便包含兩個比較器和經過 400-mV 閾值修整的通用精密內部參考。另外也可使用兩個分離式比較器和外部參考。
檢視選項
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
參考設計

TIDA-020060 — 適用於 100/1000Base-T1 乙太網路應用的汽車數據線供電參考設計

此參考設計展現出汽車應用實例的數據線供電 (PoDL) 實作。此設計使用 DP83TG720S-Q1 1000MBit/s 單對乙太網路 (SPE) PHY，並可選擇切換至 DP83TC812S-Q1 SPE PHY 以進行 100MBit/s 運作。耦合和去耦合網路用於在 50W 的最大功率下耦合。
Design guide: PDF
參考設計

PMP30963 — 具預升壓、充電器及 1S 鋰離子電量計的備用電池參考設計

此設計顯示使用 1S 鋰離子電池執行緊急運作的車用備援電池。主電源輸入的額定電壓爲 6-V 至 18-V 額定 (2.7-V 至 36-V 峰值)，符合 12-V 汽車要求。次要電源輸入具備電量計，可監控單芯鋰離子電池，並支援從 2 V 到 4.35 V 的輸入電壓。板載學習負載可執行備用電池的壽命結束偵測。
Test report: PDF
封裝 引腳 下載
SOT-23-THN (DDC) 6 檢視選項
WSON (DSE) 6 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片