TPA6101A2
- Minimal External Components Required
- 1.6 to 3.6 Supply Voltage Range
- 50-mW Stereo Output
- Low Supply Current...0.75 mA
- Low Shutdown Current...50 nA
- Gain Set Internally to 2 dB
- Pop Reduction Circuitry
- Internal Mid-Rail Generation
- Thermal and Short-Circuit Protection
- Surface-Mount Packaging
- 3-mm × 5-mm MSOP Package (DGN)
- 5-mm × 6-mm SOIC Package (D)
- 2,5-mm × 2,5-mm MicroStar Junior™ BGA Package (ZQY)
MicroStar BGA is a trademark of Texas Instruments.
The TPA6101A2 is a stereo audio power amplifier packaged in an 8-pin SOIC package, an 8-pin MSOP package, or a 15-ball BGA package, capable of delivering 50 mW of continuous RMS power per channel into 16- loads. Amplifier gain is internally set to 2 dB (inverting) to save board space by eliminating six external resistors.
The TPA6101A2 is optimized for battery applications because of its low supply current, shutdown current, and THD+N. To obtain the low supply voltage range, the TPA6101A2 biases BYPASS to VDD/4.
When driving a 16- loads, the THD+N is reduced to less than 0.06% at 1 kHz, and is less than 0.3% across the audio band of 20 Hz to 20 kHz.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | 50-mW Ultralow-Voltage, Fixed-Gain Stereo Headphone Audio Power Amp datasheet (Rev. C) | 2007年 3月 2日 | |
User guide | TPA6101A2EVM - User Guide (Rev. A) | 2001年 4月 6日 | ||
Application note | A Low-Cost, Single Coupling Capacitor Config. for Stereo Headphone Amplifiers | 1999年 12月 22日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPA6101A2EVM — TPA6101A2 評估模組 (EVM)
The TPA6101A2 is a stereo headphone amplifier capable of delivering 50mW of continuous RMS power per channel into 16-Ohm speakers. The amplifier's gain is internally set to 2dB (inverting) to save board space by eliminating six external resistors.
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 引腳 | 下載 |
---|---|---|
SOIC (D) | 8 | 檢視選項 |
VSSOP (DGK) | 8 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點