TPS22963C
- Integrated N-Channel Load Switch
- Input Voltage Range: 1 V to 5.5 V
- Internal Pass-FET RDSON = 8 mΩ (Typ)
- Ultra-Low ON-Resistance
- RON = 13 mΩ (Typ) at VIN = 5 V
- RON = 14 mΩ (Typ) at VIN = 3.3 V
- RON = 18 mΩ (Typ) at VIN = 1.8 V
- 3A Maximum Continuous Switch Current
- Reverse Current Protection (When Disabled)
- Low Shutdown Current (760 nA)
- Low Threshold 1.3-V GPIO Control Input
- Controlled Slew-Rate to Avoid Inrush Current
- Quick Output Discharge (TPS22964 only)
- Six Terminal Wafer-Chip-Scale Package (Nominal Dimensions Shown - See Addendum for Details)
- 0.9 mm x 1.4 mm, 0.5 mm Pitch, 0.5 mm Height (YZP)
- ESD Performance Tested Per JESD 22
- 2-kV Human-Body Model (A114-B, Class II)
- 500-V Charged-Device Model (C101)
The TPS22963/64 is a small, ultra-low RON load switch with controlled turn on. The device contains a low RDSON N-Channel MOSFET that can operate over an input voltage range of 1 V to 5.5 V and switch currents of up to 3 A. An integrated charge pump biases the NMOS switch in order to achieve a low switch ON-Resistance. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals. The rise time of the TPS22963/64 device is internally controlled in order to avoid inrush current.
The TPS22963/64 provides reverse current protection. When the power switch is disabled, the device will not allow the flow of current towards the input side of the switch. The reverse current protection feature is active only when the device is disabled so as to allow for intentional reverse current (when the switch is enabled) for some applications.
The TPS22963/64 is available in a small, space-saving 6-pin WCSP package and is characterized for operation over the free air temperature range of –40°C to 85°C.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS2296xC 5.5-V, 3-A, 13-mΩ On-Resistance Load Switch With Reverse Current Protection and Controlled Turn-On datasheet (Rev. A) | PDF | HTML | 2015年 1月 14日 |
| Application note | Load Switch Thermal Considerations (Rev. A) | 2018年 10月 11日 | ||
| Application note | Basics of Load Switches (Rev. A) | 2018年 9月 5日 | ||
| Application note | Power Multiplexing Using Load Switches and eFuses (Rev. A) | 2017年 6月 20日 | ||
| Application note | Selecting a Load Switch to Replace a Discrete Solution | 2017年 4月 30日 | ||
| Application note | Timing of Load Switches | 2017年 4月 27日 | ||
| Application note | Fundamentals of On-Resistance in Load Switches | 2016年 6月 9日 | ||
| Application note | Reverse Current Protection in Load Switches | 2016年 5月 19日 | ||
| Technical article | When to use load switches in place of discrete MOSFETs | PDF | HTML | 2016年 2月 3日 | |
| Application note | Managing Inrush Current (Rev. A) | 2015年 5月 28日 | ||
| EVM User's guide | Using the TPS22963/64EVM-029 Single Channel Load Switch IC (Rev. A) | 2013年 6月 26日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS22963CEVM-029 — TPS22963CEVM-029 超低 Ron 3A 負載開關評估模組
The Texas Instruments TPS22963CEVM-029 evaluation module (EVM) helps designers evaluate the performance of the TPS22963C low on-resistance, 3-A load switch in the ultra-small CSP-6 package. The EVM allows the designer to apply an input voltage (1.1 V-5.5 V) under different loading conditions (0-3 (...)
TPS22963C Unencrypted PSpice Transient Model Package (Rev. B)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
| 封裝 | 引腳 | 下載 |
|---|---|---|
| DSBGA (YZP) | 6 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。