TPS62770

現行

採用 WCSP 且具有 360nA Iq 降壓和最高至 15V 升壓的小型單晶片雙解決方案

產品詳細資料

Iout (max) (A) 0.3 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Vout (min) (V) 1 Vout (max) (V) 15 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00000037
Iout (max) (A) 0.3 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Vout (min) (V) 1 Vout (max) (V) 15 Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00000037
DSBGA (YFP) 16 3.24 mm² 1.8 x 1.8
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
TPS62740 現行 具 360nA Iq 的 2.2V-5.5V 輸入、超低功耗 300mA 降壓 DCDC 轉換器 Single-channel low-IQ buck converter

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet TPS62770 Multi-Rail DC/DC Converter For Wearable Applications datasheet (Rev. B) PDF | HTML 2016年 4月 11日
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022年 5月 23日
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019年 10月 14日
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019年 6月 14日
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018年 6月 22日
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016年 10月 24日
EVM User's guide TPS62770EVM-734 Users Guide 2016年 3月 10日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62770EVM-734 — TPS62770 多軌 DC/DC 轉換器評估模組

The TPS62770EVM-734 is designed to help the users easily evalaute and test the operation and functionality of the TPS62770 Multi Rail DC/DC Converter. The EVM provides two independend power stage solutions, optimized for small solution as well as providing full feature set. The power stage provides (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS62770 PSpice Unencrypted Transient Model (Rev. A)

SLVMBI1A.ZIP (280 KB) - PSpice Model
計算工具

SLVC780 Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支援產品和硬體

支援產品和硬體

產品
精密 DAC (≤10 MSPS)
DAC43401 具有 Hi-Z、EEPROM、波形產生器和比較器的 8 位元 1 通道電壓輸出智慧型 DAC DAC43608 採用小型 QFN 封裝的 8 位元、8 通道、I2C、電壓輸出 DAC DAC53401 具有 Hi-Z、EEPROM、波形產生器和比較器的 10 位元 1 通道電壓輸出智慧型 DAC DAC53608 採用小型 QFN 封裝的 10 位元、八通道、I2C、電壓輸出 DAC
Power modules (integrated inductor)
TPS82084 具備整合式電感器的 2-A、高效率降壓轉換器模組 TPS82085 具備整合式電感器的 3A、高效率降壓式轉換器模組 TPS82130 具整合式電感器的 17-V 輸入 3-A 降壓轉換器模組 TPS82140 具整合式電感器的 17V 輸入 2A 同步降壓轉換器 MicroSiP ™模組 TPS82150 具有整合式電感器的 17V 輸入 1A 同步降壓轉換器 MicroSiP™ 模組 TPSM82810 採用 3 x 4-mm μSIP 封裝且具有可調整頻率和追蹤功能的 2.75-V 至 6-V、4-A 降壓模組 TPSM82813 2.75-V 至 6-V、3-A 降壓模組,採用 3 x 4 mm μSIP 封裝,具有可調整頻率和追蹤功能 TPSM82821 具有整合式電感器、採用 2 x 2.5 x 1.1 mm μSIP 封裝的 5.5V 輸入、1A 降壓模組 TPSM82822 具有整合式電感器、採用 2 x 2.5 x 1.1 mm μSIP 封裝的 5.5V 輸入、2A 降壓模組
AC/DC & DC/DC converters (integrated FET)
TLV62065 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TLV62080 採用 2x2mm SON 封裝的 1.2A 高效降壓轉換器 TLV62084 採用 2x2mm SON 封裝的 2A 高效降壓轉換器 TLV62084A 採用 2x2mm SON 封裝的 2A 高效降壓轉換器 TLV62085 採用 2x2 QFN 的 3-A 高效率降壓轉換器 TLV62090 採用 3x3mm QFN 封裝的 3A 高效降壓轉換器 TLV62095 具 DCS 控制的 4A 同步降壓轉換器 TLV62130 採用 3x3 QFN 封裝的 3-17V 3A 降壓轉換器 TLV62130A 採用 3x3 QFN 封裝且具備 DCS-Control 的 3-17V 3A 降壓式轉換器 TLV62150 具 DCS-Control™ 的 4-17V,1A 降壓轉換器 TLV62150A 採用 3x3 QFN 封裝且具 DCS 控制的 4-17V、1A 降壓轉換器 TLV62565 採用 SOT23 封裝的 1.5A 降壓轉換器 TLV62566 採用 SOT23 封裝且具有電源良好的 1.5A 降壓轉換器 TLV62568 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、1A 高效率降壓式降壓轉換器 TLV62568A 採用小型 SOT563 封裝且具有強制 PWM 的 2.5V-5.5V 輸入、1A 高效率降壓式降壓轉換器 TLV62569 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、2-A 高效率降壓式降壓轉換器 TLV62569A 採用 SOT 封裝並具有強制 PWM 的 2A 高效率降壓轉換器 TLV62585 採用 2x2 QFN 或 SOT563 封裝的 2.5V-5.5V 輸入 3-A 高效降壓轉換器 TPS62000 可調整 600-mA、95% 高效降壓轉換器 TPS62000-HT 高溫高效降壓低功耗 DC-DC 轉換器 TPS62020 可調整 600-mA、95% 高效降壓轉換器、18uA、MSOP-10 TPS62040 採用 MSOP-10 和 QFN、靜態電流為 18 uA 的可調整 1.2-A、95% 高效降壓轉換器 TPS62050 採用 MSOP-10 的可調整 800-mA、10V Vin、95% 高效降壓轉換器 TPS62056 採用 MSOP-10 的 3.3-V 輸出、800-mA、10V Vin、95% 高效降壓轉換器 TPS62060 採用 2x2 SON 封裝的 3MHz、1.6A 降壓轉換器 TPS62065 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TPS62065-Q1 採用 2x2 SON 封裝的 3MHz、2A 汽車降壓式轉換器 TPS62067 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TPS62067-Q1 採用 2×2 SON 封裝的車用 3-MHz 2-A 降壓轉換器 TPS62080 採用 2x2mm SON 封裝且具備可調整 Vout 的 1.2A 高效率降壓式轉換器 TPS62080A 採用 2x2mm SON 封裝的 1.2A 高效降壓轉換器 TPS62085 採用 2x2 HotRod 封裝且具 DCS-Control 和 Hiccup 短路保護功能的 3-A 降壓轉換器 TPS62088 採用 1.2 mm x 0.8 mm WCSP 封裝的 2.4-V 至 5.5-V 輸入、微型 6 針腳 3-A 降壓轉換器 TPS62090 具備 DCS™ Control 的 3A、6V 輸入、效率高達 97% 的同步降壓式轉換器 TPS62090-Q1 汽車: 3A、2.5 至 6V 輸入、高達 97% 效率、3x3 QFN 降壓轉換器 TPS62095 具 DCS 控制的 4A 同步降壓轉換器 TPS62097 採用 HotRod 封裝且具可選開關頻率的 2-A 降壓轉換器 TPS62097-Q1 採用 3x3 QFN 封裝並採用可潤濕側翼的 2A 車用降壓轉換器 TPS62100 具有可調整輸出的多模式 300kHz 同步降壓轉換器 TPS62110 採用 QFN-16 的可調式 1.5-A、17-V Vin 降壓轉換器 TPS62110-EP 強化型產品 17V、1.5A 同步降壓轉換器 TPS62110-HT 高溫 17-V、1.5-A 同步降壓轉換器 TPS62110-Q1 採用 QFN-16 封裝的車用 3V 至 17V,1.5A 降壓轉換器 TPS62113 採用 QFN-16 封裝且具 LBI 功能的 1.5-A、17-Vin 降壓轉換器 TPS62120 具備 DCS 控制的 15V、75mA、96% 效率降壓轉換器 TPS62122 15V 75mA 96% 效率的降壓轉換器 TPS62125 具備可調整啟用臨界值和磁滯的 3V-17V、300mA 降壓轉換器 TPS62130 採用 3x3 QFN 封裝且具備 DCS-Control 的 3-17V 3A 降壓式轉換器 TPS62130A 採用 3x3 QFN 封裝的 3V 至 17V 3-A 降壓轉換器 TPS62130A-Q1 採用 3 × 3 QFN 封裝的 TPS62130A-Q1 3 至 17-V 3-A 汽車降壓轉換器 TPS62135 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 4.0A 降壓轉換器 TPS62136 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 4.0A 降壓轉換器 TPS62140 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 2A 降壓式轉換器 TPS62140A 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 2A 降壓式轉換器 TPS62147 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 2.0A 降壓轉換器 TPS62148 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 2.0A 降壓轉換器 TPS62150 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 1A 降壓式轉換器 TPS62150A 採用 3x3 QFN 封裝且具備 DCS 控制的3-17V 1A 3MHz 降壓轉換器 TPS62150A-Q1 採用 3 × 3 QFN 封裝的 TPS62150A-Q1 3 至 17-V 1-A 汽車降壓轉換器 TPS62160 具 DCS-Control™ 的 3V-17V 1A 降壓轉換器 TPS62160-Q1 採用 2x2SON 的 3V-17V 1A 汽車降壓式轉換器 TPS62170 採用 2x2 QFN 封裝且具備 DCS-Control 的 3–17V 0.5A 降壓式轉換器 TPS62170-Q1 採用 2x2 QFN 封裝的 3-17V 0.5A 汽車降壓式轉換器 TPS62175 具休眠模式的 28V、0.5A 降壓轉換器 TPS62180 具電源良好、1% 準確性和可調式軟啓動的 4 V 至 15 V、6 A 同步降壓轉換器 TPS62184 具有電源良好、1% 準確性和可調式軟啓動的 4 V 至 17 V、6 A 同步降壓轉換器 TPS62200 採用 SOT-23 的可調整 300-mA、95% 高效降壓轉換器 TPS62220 採用 ThinSOT-23、靜態電流為 15uA 的可調整 400-mA、95% 高效降壓控制器 TPS62240 採用 2x2mm SON/TSOT23 封裝的 2.25MHz 300mA 降壓式轉換器 TPS62250 2.25MHz、1A 峰值電流限制降壓轉換器 TPS62260 採用 2x2mm SON/TSOT23 封裝的 2.25MHz 600mA 降壓式轉換器 TPS62260-Q1 採用 2x2mm SON/TSOT23 封裝的車用 2V 至 6V、2.25MHz 固定頻率 600mA 降壓轉換器 TPS62290 2.25MHz 1A 降壓式轉換器,以 2x2mm SON 封裝提供 TPS62290-Q1 採用 2x2mm SON/TSOT23 封裝的車用 2.3V 至 6V、2.25MHz 固定頻率 1A 降壓轉換器 TPS62400 具 1 線介面、採用 QFN 封裝的雙路可調式 400mA 和 600mA、2.25MHz 降壓轉換器 TPS62400-Q1 具備 1 線介面的汽車類雙路可調整 400mA 和 600mA、2.25MHz 降壓式轉換器 TPS62410 具 1 線介面、採用 QFN 封裝的 2.25MHZ 2x800mA 雙路降壓轉換器 TPS62410-Q1 車用 2.5V 至 6V、2.25MHz 固定頻率雙路 (800mA/800mA) 降壓轉換器 TPS62420 具 1 線介面、採用 QFN 封裝的雙路可調式 600mA 和 1000mA、2.25MHz 降壓轉換器 TPS62420-Q1 具 1 線介面的車用 2.5V 至 6V、2.25MHz 固定頻率雙路 (1A/600mA) 降壓轉換器 TPS62480 6A、2.4V-5.5V 輸入、同步降壓轉換器,具有 PG 輸出、可調整緩啟動和選擇功能 TPS62510 適用低輸入電壓的可調節、96% 效率的 1.5A 降壓轉換器 TPS62560 2.25MHz 600mA 降壓式轉換器,以 2x2mm SON 封裝提供 TPS62561 採用 TSOT23 封裝的 2.25MHz 600mA 降壓轉換器 TPS62590 採用 2 x 2 SON 封裝的 2.25MHz、1A 降壓轉換器 TPS62590-Q1 採用 2x2mm SON 封裝的車用 2.5V 至 6V、2.25MHz 固定頻率 1A 降壓轉換器 TPS62750 具可編程輸入電流限制的 2.25MHz 降壓轉換器,適用 USB 供電應用 TPS62751 具可編程輸入電流限制的 2.25MHz 降壓轉換器,適用 USB 供電應用 TPS62770 採用 WCSP 且具有 360nA Iq 降壓和最高至 15V 升壓的小型單晶片雙解決方案 TPS62810-Q1 採用 2 mm x 3 mm 可潤濕側翼 QFN 封裝的車用 2.75V 至 6V,4A 降壓轉換器 TPS62810M 採用 2-mm x 3-mm QFN 封裝,具有 -55C 擴展溫度的 2.75-V 至 6-V、4-A 降壓轉換器 TPS62821 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、1-A 降壓轉換器 TPS62822 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 TPS62823 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、3-A 降壓轉換器 TPS62825 採用 1.5-mm x 1.5-mm QFN 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 TPS62826 採用 1.5-mm x 1.5-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V-5.5-V 輸入、3-A 降壓轉換器 TPS62827 採用 1.5mm x 1.5mm QFN 封裝,具有 1% 準確度的 2.5V 至 5.5V 輸入、4A 降壓轉換器
參考設計

PMP21884 — 適用穿戴式裝置且具電池充電的小巧型超低 IQ DC/DC 電源供應參考設計

適用智慧型手錶及健身追蹤裝置的高度整合電源參考設計,實現體積超小 (48 平方公釐) 的超低 IQ。電源供應器包含七個電源軌,其中包括電池充電器、LDO、DC/DC 降壓轉換器,和適用心率監控器、AFE LED 驅動器電源或 PMOLED 偏壓的整合式升壓轉換器。
Test report: PDF
電路圖: PDF
參考設計

PMP9792 — 適合可穿式應用的多軌、低 IQ 電源參考設計

Wearable applications like smart wristbands provide two main power rails to supply the wireless MCU, sensors, and the display. They are very tiny, and therefore require the smallest solution size possible. This reference design shows a full solution based on the TPS62770 multi-rail DC/DC (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
DSBGA (YFP) 16 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片