韌體
TUSB9260
- Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant - TID 340000007
- Integrated Transceiver Supports SS/HS/FS Signaling
- Best in Class Adaptive Equalizer
- Allows for Greater Jitter Tolerance in the Receiver
- USB Class Support
- USB Attached SCSI Protocol (UASP)
- USB Mass Storage Class Bulk-Only Transport (BOT)
- Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)
- USB Bootability Support
- USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a TI Provided Application
- SuperSpeed USB 3.0 Compliant - TID 340000007
- SATA Interface
- Serial ATA Specification Revision 2.6
- gen1i, gen1m, gen2i, and gen2m
- Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification
- Serial ATA Specification Revision 2.6
- Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded From EEPROM Via SPI Interface
- Two Additional SPI Port Chip Selects for Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
- 2 GPIOs Have PWM Functionality for LED Blink Speed Control
- Serial Communications Interface for Debug (UART)
- General Features
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and IEEE1149.6 Boundary Scan
- Available in a Fully RoHS Compliant Package
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Target Applications
- External HDD/SSD
- External DVD
- External CD
- HDD-Based Portable Media Player
The TUSB9260 is an ARM cortex M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP) compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class bulk-only transport (BOT), and USB human interface device (HID) interfaces.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | USB 3.0 to SATA Bridge. datasheet (Rev. D) | 2011年 5月 9日 | |
| * | Errata | TUSB9260 Errata | 2010年 10月 27日 | |
| User guide | TUSB9260 Flash Burner - User Guide (Rev. D) | 2013年 10月 24日 | ||
| Application note | TUSB9260 Implementation Guide (Rev. C) | 2011年 2月 22日 | ||
| User guide | TUSB9260DEMO User's Guide (Rev. B) | 2011年 2月 22日 | ||
| User guide | TUSB926x SpeedBoost Monitor User's Guide | 2010年 9月 23日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
軟體程式設計工具
SLLC414 — TUSB926x FlashBurner Utility
支援產品和硬體
產品
USB 集線器與控制器
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 引腳 | 下載 |
|---|---|---|
| HTQFP (PVP) | 64 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點