UCC28070

現行

雙相交錯式連續傳導模式 (CCM) PFC 控制器

產品詳細資料

Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost Rating Catalog Duty cycle (max) (%) 99
Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost Rating Catalog Duty cycle (max) (%) 99
SOIC (DW) 20 131.84 mm² 12.8 x 10.3 TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Interleaved Average Current-Mode PWM Control
    With Inherent Current Matching
  • Advanced Current Synthesizer Current Sensing
    for Superior Efficiency
  • Highly-Linear Multiplier Output With Internal
    Quantized Voltage Feed-Forward Correction for
    Near-Unity PF
  • Programmable Frequency from 30 kHz to 300 kHz
  • Programmable Maximum Duty-Cycle Clamp
  • Programmable Frequency-Dithering Rate and
    Magnitude for Enhanced EMI Reduction
    • Magnitude: 3 kHz to 30 kHz
    • Rate: Up to 30 kHz
  • External-Clock Synchronization Capability
  • Enhanced Load and Line Transient Response
    through Voltage Amplifier Output Slew-Rate
    Correction
  • Programmable Peak Current Limiting
  • Bias-Supply UVLO, Overvoltage Protection, Open-
    Loop Detection, and PFC-Enable Monitoring
  • External PFC-Disable Interface
  • Open-Circuit Protection on VSENSE and VINAC
    pins
  • Programmable Soft-Start
  • Interleaved Average Current-Mode PWM Control
    With Inherent Current Matching
  • Advanced Current Synthesizer Current Sensing
    for Superior Efficiency
  • Highly-Linear Multiplier Output With Internal
    Quantized Voltage Feed-Forward Correction for
    Near-Unity PF
  • Programmable Frequency from 30 kHz to 300 kHz
  • Programmable Maximum Duty-Cycle Clamp
  • Programmable Frequency-Dithering Rate and
    Magnitude for Enhanced EMI Reduction
    • Magnitude: 3 kHz to 30 kHz
    • Rate: Up to 30 kHz
  • External-Clock Synchronization Capability
  • Enhanced Load and Line Transient Response
    through Voltage Amplifier Output Slew-Rate
    Correction
  • Programmable Peak Current Limiting
  • Bias-Supply UVLO, Overvoltage Protection, Open-
    Loop Detection, and PFC-Enable Monitoring
  • External PFC-Disable Interface
  • Open-Circuit Protection on VSENSE and VINAC
    pins
  • Programmable Soft-Start

The UCC28070 is an advanced power factor correction (PFC) device that integrates two pulse-width modulators (PWMs) operating 180° out of phase. This interleaved PWM operation generates substantial reduction in the input and output ripple currents, allowing the conducted-EMI filtering to become easier and less expensive. A significantly improved multiplier design provides a shared current reference to two independent current amplifiers that ensures matched average-current mode control in both PWM outputs while maintaining a stable, low-distortion, sinusoidal input-line current.

The UCC28070 device contains multiple innovations including current synthesis and quantized voltage feed-forward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements.

The UCC28070 device also contains a variety of protection features including output-overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

The UCC28070 is an advanced power factor correction (PFC) device that integrates two pulse-width modulators (PWMs) operating 180° out of phase. This interleaved PWM operation generates substantial reduction in the input and output ripple currents, allowing the conducted-EMI filtering to become easier and less expensive. A significantly improved multiplier design provides a shared current reference to two independent current amplifiers that ensures matched average-current mode control in both PWM outputs while maintaining a stable, low-distortion, sinusoidal input-line current.

The UCC28070 device contains multiple innovations including current synthesis and quantized voltage feed-forward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements.

The UCC28070 device also contains a variety of protection features including output-overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的產品
UCC28070-Q1 現行 車用雙相交錯式連續傳導 (CCM) 模式 PFC 控制器 Automotive qualified version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 11
類型 標題 日期
* Data sheet UCC28070 Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. F) PDF | HTML 2016年 4月 18日
Application note UCC2806x PCB Layout Guideline for PFC 2019年 4月 29日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Are you on-board? Demystifying EV charging systems PDF | HTML 2017年 7月 31日
Technical article Is PFC possible without input voltage sensing? PDF | HTML 2016年 9月 14日
Technical article Staying cool, efficiently PDF | HTML 2016年 8月 22日
White paper An Interleaved PFC Preregulator for High-Power Converters 2015年 4月 28日
More literature Design Review of a Full-Featured 350-W Offline Power Converter 2013年 10月 29日
Application note UCC28070 300W Interleaved PFC Pre-regulator Design Review (Rev. B) 2010年 7月 8日
Application note UCC28070 Implement Bridgeless PFC Pre-Regulator Design 2009年 6月 18日
User guide UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) 2009年 5月 12日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28070EVM — UCC28070 評估模組

The UCC28070 evaluation module is a 300W, two-phase interleaved, PFC pre-regulator that uses average current mode control techniques to achieve near unity power factor. The pre-regulator was designed to operate off a universal ac line input of 85V to 265V and provides a regulated 390V dc output. (...)
使用指南: PDF
TI.com 無法提供
模擬型號

UCC28070 PSpice Average Model

SLUM098.ZIP (210 KB) - PSpice Model
模擬型號

UCC28070 PSpice Start-up Simulation Using Average Model

SLUM097.ZIP (76 KB) - PSpice Model
模擬型號

UCC28070 TINA-TI Spice Average Model

SLUM329.ZIP (31 KB) - TINA-TI Spice Model
模擬型號

UCC28070 TINA-TI Start-up Simulation Using Average Model

SLUM328.TSC (813 KB) - TINA-TI Reference Design
計算工具

SLUC114 UCC28070 Excel Applications Design Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC & DC/DC controllers (external FET)
UCC28070 雙相交錯式連續傳導模式 (CCM) PFC 控制器 UCC28070A 具展頻範圍 (10kHz 至 300kHz) 的雙相交錯式 CCM PFC 控制器
硬體開發
開發板
UCC28070EVM UCC28070 評估模組
Gerber 檔案

UCC28070 Mathcad Design Tool

SLUC667.ZIP (217 KB)
參考設計

PMP40261 — 800-W 高效率免橋接功率因數校正 (PFC) 參考設計

This reference design is a bridgeless PFC circuit using UCC28070 Interleaving CCM PFC controller to provide 390-V /2-A output from universal AC input. The circuit uses Average Current Mode PWM control with advanced internal current synthesizer for current sensing. This design achieves 96.57% peak (...)
Test report: PDF
電路圖: PDF
封裝 引腳 下載
SOIC (DW) 20 檢視選項
TSSOP (PW) 20 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片