SLLSFC6B November   2021  – July 2022 ISOUSB111

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Power Ratings
    6. 6.6  Insulation Specifications
    7. 6.7  Safety-Related Certifications
    8. 6.8  Safety Limiting Values
    9. 6.9  Electrical Characteristics
    10. 6.10 Switching Characteristics
    11. 6.11 Insulation Characteristics Curves
    12. 6.12 Typical Characteristics
  7. Parameter Measurement Information
    1. 7.1 Test Circuits
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Power Supply Options
      2. 8.3.2 Power Up
      3. 8.3.3 Symmetric Operation, Dual-Role Port and Role-Reversal
      4. 8.3.4 Connect and Speed Detection
      5. 8.3.5 Disconnect Detection
      6. 8.3.6 Reset
      7. 8.3.7 LS/FS Message Traffic
      8. 8.3.8 L2 Power Management State (Suspend) and Resume
      9. 8.3.9 L1 Power Management State (Sleep) and Resume
    4. 8.4 Device Functional Modes
  9. Power Supply Recommendations
  10. 10Application and Implementation
    1. 10.1 Typical Application
      1. 10.1.1 Isolated Host or Hub
      2. 10.1.2 Isolated Peripheral - Self-Powered
      3. 10.1.3 Isolated Peripheral - Bus-Powered
      4. 10.1.4 Application Curve
        1. 10.1.4.1 Insulation Lifetime
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 Layout Example
      2. 11.1.2 PCB Material
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Support Resources
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information
    1. 13.1 Tape and Reel Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Pin Configuration and Functions

Figure 5-1 DW Package 16-Pin SOIC Top View

Pin Functions—16 DW

PIN I/O DESCRIPTION
NO. NAME
1 VBUS1 Input Power Supply for Side 1. If a 4.25 V to 5.5 V (example USB power bus) supply is available connect it to VBUS1. In this case an internal LDO generates V3P3V1. Else, connect VBUS1 and V3P3V1 to an external 3.3 V power supply.
2 GND1 Ground 1. Ground reference for Isolator Side 1.
3 V3P3V1 Power Supply for Side 1. If a 4.25 V to 5.5 V supply is connected to VBUS1 connect a bypass capacitor between V3P3V1 and GND1. In this case an internal LDO generates V3P3V1. Else, connect VBUS1 and V3P3V1 to an external 3.3 V power supply.
4 NC Preferably leave floating or connect to V3P3V1. It is also OK to connect to GND1.
5 NC Preferably leave floating or connect to V3P3V1. It is also OK to connect to GND1.
6 UD- I/O Upstream facing port D-.
7 UD+ I/O Upstream facing port D+.
8 GND1 Ground 1. Ground reference for Isolator Side 1.
9 GND2 Ground 2. Ground reference for Isolator Side 2.
10 DD+ I/O Downstream facing port D+.
11 DD- I/O Downstream facing port D-.
12 PIN I Upstream pull-up enable. If this pin is low, pull-up on DD+ and DD- is not recognized.
13 NC Preferably leave floating or connect to V3P3V2. It is also OK to connect to GND2.
14 V3P3V2 Power Supply for Side 2. If a 4.25 V to 5.5 V supply is connected to VBUS2 connect a bypass capacitor between V3P3V2 and GND1. In this case an internal LDO generates V3P3V2. Else, connect VBUS2 and V3P3V2 to an external 3.3 V power supply.
15 GND2 Ground 2. Ground reference for Isolator Side 2.
16 VBUS2 Input Power Supply for Side 2. If a 4.25 V to 5.5 V (example USB power bus) supply is available connect it to VBUS2. In this case an internal LDO generates V3P3V2. Else, connect VBUS2 and V3P3V2 to an external 3.3 V power supply.
GUID-20200818-CA0I-ZTGQ-V8HH-KNVRPSZ6MZBK-low.gif Figure 5-2 DWX Package 16-Pin SSOP Top View
Table 5-1 Pin Functions—16 DWX
PIN I/O DESCRIPTION
NO. NAME
1 VBUS1 Input Power Supply for Side 1. If a 4.25 V to 5.5 V (example USB power bus) supply is available connect it to VBUS1. In this case an internal LDO generates V3P3V1. Else, connect VBUS1 and V3P3V1 to an external 3.3 V power supply.
2 GND1 Ground 1. Ground reference for Isolator Side 1.
3 V3P3V1 Power Supply for Side 1. If a 4.25 V to 5.5 V supply is connected to VBUS1 connect a bypass capacitor between V3P3V1 and GND1. In this case an internal LDO generates V3P3V1. Else, connect VBUS1 and V3P3V1 to an external 3.3 V power supply.
4 NC Leave floating or connect to V3P3V1.
5 V2OK O High level on this pin indicates that side 2 is powered up.
6 UD- I/O Upstream facing port D-.
7 UD+ I/O Upstream facing port D+.
8 GND1 Ground 1. Ground reference for Isolator Side 1.
9 GND2 Ground 2. Ground reference for Isolator Side 2.
10 DD+ I/O Downstream facing port D+.
11 DD- I/O Downstream facing port D-.
12 V1OK High level on this pin indicates that side 1 is powered up.
13 NC Leave floating or connect to V3P3V2.
14 V3P3V2 Power Supply for Side 2. If a 4.25 V to 5.5 V supply is connected to VBUS2 connect a bypass capacitor between V3P3V2 and GND1. In this case an internal LDO generates V3P3V2. Else, connect VBUS2 and V3P3V2 to an external 3.3 V power supply.
15 GND2 Ground 2. Ground reference for Isolator Side 2.
16 VBUS2 Input Power Supply for Side 2. If a 4.25 V to 5.5 V (example USB power bus) supply is available connect it to VBUS2. In this case an internal LDO generates V3P3V2. Else, connect VBUS2 and V3P3V2 to an external 3.3 V power supply.