SLCS142G Data sheet

SLCS142G December 2003 – March 2023 LM2901-Q1 , LM2901AV-Q1 , LM2901B-Q1 , LM2901V-Q1

PRODMIX

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)

D|14
PW|14

Thermal pad, mechanical data (Package|Pins)

Orderable Information

6.11 Electrical Characteristics for LM2901x-Q1

V_CC = 5 V, at specified free-air temperature (unless otherwise noted)

PARAMETER		TEST CONDITIONS⁽¹⁾		T_A⁽²⁾	MIN	TYP	MAX	UNIT
V_IO	Input offset voltage	V_IC = V_ICR(min), V_O = 1.4 V, V_CC = 5 V to MAX⁽³⁾	Non A devices	25°C		2	7	mV
			Non A devices	Full range			15
			A suffix devices	25°C		1	2
			A suffix devices	Full range			4
I_IO	Input offset current	V_O = 1.4 V		25°C		5	50	nA
I_IO	Input offset current	V_O = 1.4 V		Full range			200	nA
I_IB	Input bias current	V_O = 1.4 V		25°C		–25	–250	nA
I_IB	Input bias current	V_O = 1.4 V		Full range			–500	nA
V_ICR	Common-mode input-voltage range⁽⁴⁾			25°C	0		V_CC − 1.5	V
V_ICR	Common-mode input-voltage range⁽⁴⁾			Full range	0		V_CC − 2	V
A_VD	Large-signal differential-voltage amplification	V_CC = 15 V, V_O = 1.4 V to 11.4 V, R_L ≥ 15 kΩ to V_CC		25°C	25	100		V/mV
I_OH	High-level output current	V_ID = 1 V	V_OH = 5 V	25°C		0.1	50	nA
I_OH	High-level output current	V_ID = 1 V	V_OH = V_CC MAX⁽³⁾	Full range			1	μA
V_OL	Low-level output voltage	V_ID = –1 V	I_OL = 4 mA	25°C		150	400	mV
V_OL	Low-level output voltage	V_ID = –1 V	I_OL = 4 mA	Full range			700	mV
I_OL	Low-level output current	V_ID = –1 V	V_OL = 1.5 V	25°C	6	16		mA
I_CC	Supply current (four comparators)	V_O = 2.5 V, No load	V_CC = 5 V	25°C		0.8	2
I_CC	Supply current (four comparators)	V_O = 2.5 V, No load	V_CC = MAX⁽³⁾	25°C		1	2.5

(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(2) Full range (MIN to MAX) is −40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified.

(3) V_CC MAX = 30 V for non-V devices and 32 V for V-suffix devices.

(4) The voltage at either the input or common mode should not be allowed to negative by more that 0.3 V. The upper end of the common-mode voltage range is V_CC+ – 1.5 V; however, one input can exceed V_CC, and the comparator will provide a proper output state as long as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.