SBOS997 Data sheet

SBOS997 August 2020 – MONTH LMH9135

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

RRL|12
- MPQF578

Thermal pad, mechanical data (Package|Pins)

Orderable Information

6.5 Electrical Characteristics

T_A = +25°C, VDD = 3.3V, Frequency (f_in) = 3.5 GHz, Differential Input Impedance (Z_IN) = 100 Ω, Output Load (Z_LOAD) = 50 Ω (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
RF PERFORMANCE - LMH9135
F_RF	RF frequency range		3200		4200	MHz
BW_1dB	1dB Bandwidth			1000		MHz
S21	Gain			18		dB
NF	Noise Figure	R_S = 100 Ω differential		3.8		dB
OP1dB	Output P1dB	Z_LOAD = 50 Ω		18		dBm
OIP3	Output IP3	f_in = 3.5 GHz ± 5 MHz Spacing, P_OUT/TONE = 2 dBm		31.5		dBm
	Differential Input Gain Imbalance			±0.5		dB
	Differential Input Phase Imbalance			±4		degree
S11	Input return loss ⁽¹⁾	_fin = 3.3 - 3.8 GHz		-10		dB
S11	Input return loss ⁽¹⁾	_fin = 3.3 - 4.2 GHz		-10		dB
S22	Output return loss ⁽¹⁾	_fin = 3.3 - 3.8 GHz		-10		dB
S22	Output return loss ⁽¹⁾	_fin = 3.3 - 4.2 GHz		-10		dB
S12	Reverse isolation			35		dB
CMRR	Common Mode Rejection Ratio ⁽²⁾			30		dB
Switching and Digital input characteristics
t_ON	Turn-ON time	50% VPD to 90% RF		0.2		µs
t_OFF	Tun-OFF time	50% VPD to 10% RF		0.2		µs
V_IH	High-Level Input Voltage	PD pin	1.4			V
V_IL	Low-Level Input Voltage	PD pin			0.5	V
DC current and Power Consumption
I_{VDD_ON}	Supply Current			120		mA
I_{VDD_PD}	Power Down Current			10		mA
P_dis	Power Dissipation			395		mW

(1) Reference impedance: Input = 100 Ω differential, Output = 50 Ω single-ended

(2) CMRR is calculated using (S₁₂ - S₁₃)/(S₁₂ + S₁₃) for Transmit (1 is output port, 2 & 3 are differential input ports)