SNVSCP2 Data sheet

SNVSCP2A March 2025 – August 2025 LP5815

PRODUCTION DATA

Package Options

Mechanical Data (Package|Pins)

DRL|8
- MPCS002F
YCH|8
- MXBG441A

Thermal pad, mechanical data (Package|Pins)

Orderable Information

7.6 Register Maps

Table 7-7 Register Maps

Address	Acronym	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
0h	CHIP_EN	RESERVED						INSTABLINK_DIS	CHIP_EN
1h	DEV_CONFIG0	RESERVED							MAX_CURRENT
2h	DEV_CONFIG1	RESERVED					OUT2_EN	OUT1_EN	OUT0_EN
3h	DEV_CONFIG2	LED_FADE_TIME				RESERVED	OUT2_FADE_EN	OUT1_FADE_EN	OUT0_FADE_EN
4h	DEV_CONFIG3	RESERVED	OUT2_EXP_EN	OUT1_EXP_EN	OUT0_EXP_EN	RESERVED	OUT2_AUTO_EN	OUT1_AUTO_EN	OUT0_AUTO_EN
5h	DEV_CONFIG4	RESERVED		OUT2_ENGINE_CH		OUT1_ENGINE_CH		OUT0_ENGINE_CH
6h	ENGINE_CONFIG0	ENGINE0_ORDER3		ENGINE0_ORDER2		ENGINE0_ORDER1		ENGINE0_ORDER0
7h	ENGINE_CONFIG1	ENGINE1_ORDER3		ENGINE1_ORDER2		ENGINE1_ORDER1		ENGINE1_ORDER0
8h	ENGINE_CONFIG2	ENGINE2_ORDER3		ENGINE2_ORDER2		ENGINE2_ORDER1		ENGINE2_ORDER0
9h	ENGINE_CONFIG3	ENGINE3_ORDER3		ENGINE3_ORDER2		ENGINE3_ORDER1		ENGINE3_ORDER0
Ah	ENGINE_CONFIG4	E1O3_EN	E1O2_EN	E1O1_EN	E1O0_EN	E0O3_EN	E0O2_EN	E0O1_EN	E0O0_EN
Bh	ENGINE_CONFIG5	E3O3_EN	E3O2_EN	E3O1_EN	E3O0_EN	E2O3_EN	E2O2_EN	E2O1_EN	E2O0_EN
Ch	ENGINE_CONFIG6	ENGINE3_REPT		ENGINE2_REPT		ENGINE1_REPT		ENGINE0_REPT
Dh	SHUTDOWN_CMD	SHUTDOWN
Eh	RESET_CMD	RESET
Fh	UPDATE_CMD	UPDATE
10h	START_CMD	START
11h	STOP_CMD	STOP
12h	PAUSE_CONTINUE	RESERVED							PAUSE_CONTINUE
13h	FLAG_CLR	RESERVED						TSD_CLR	POR_CLR
14h	OUT0_DC	OUT0_DC
15h	OUT1_DC	OUT1_DC
16h	OUT2_DC	OUT2_DC
18h	OUT0_MANUAL_PWM	OUT0_MANUAL_PWM
19h	OUT1_MANUAL_PWM	OUT1_MANUAL_PWM
1Ah	OUT2_MANUAL_PWM	OUT2_MANUAL_PWM
1Ch	PATTERN0_PAUSE_TIME	PATTERN0_PAUSE_T0				PATTERN0_PAUSE_T1
1Dh	PATTERN0_REPEAT_TIME	RESERVED				PATTERN0_PT
1Eh	PATTERN0_PWM0	PATTERN0_PWM0
1Fh	PATTERN0_PWM1	PATTERN0_PWM1
20h	PATTERN0_PWM2	PATTERN0_PWM2
21h	PATTERN0_PWM3	PATTERN0_PWM3
22h	PATTERN0_PWM4	PATTERN0_PWM4
23h	PATTERN0_SLOPER_TIME1	PATTERN0_SLOPER_T1				PATTERN0_SLOPER_T0
24h	PATTERN0_SLOPER_TIME2	PATTERN0_SLOPER_T3				PATTERN0_SLOPER_T2
25h	PATTERN1_PAUSE_TIME	PATTERN1_PAUSE_T0				PATTERN1_PAUSE_T1
26h	PATTERN1_REPEAT_TIME	RESERVED				PATTERN1_PT
27h	PATTERN1_PWM0	PATTERN1_PWM0
28h	PATTERN1_PWM1	PATTERN1_PWM1
29h	PATTERN1_PWM2	PATTERN1_PWM2
2Ah	PATTERN1_PWM3	PATTERN1_PWM3
2Bh	PATTERN1_PWM4	PATTERN1_PWM4
2Ch	PATTERN1_SLOPER_TIME1	PATTERN1_SLOPER_T1				PATTERN1_SLOPER_T0
2Dh	PATTERN1_SLOPER_TIME2	PATTERN1_SLOPER_T3				PATTERN1_SLOPER_T2
2Eh	PATTERN2_PAUSE_TIME	PATTERN2_PAUSE_T0				PATTERN2_PAUSE_T1
2Fh	PATTERN2_REPEAT_TIME	RESERVED				PATTERN2_PT
30h	PATTERN2_PWM0	PATTERN2_PWM0
31h	PATTERN2_PWM1	PATTERN2_PWM1
32h	PATTERN2_PWM2	PATTERN2_PWM2
33h	PATTERN2_PWM3	PATTERN2_PWM3
34h	PATTERN2_PWM4	PATTERN2_PWM4
35h	PATTERN2_SLOPER_TIME1	PATTERN2_SLOPER_T1				PATTERN2_SLOPER_T0
36h	PATTERN2_SLOPER_TIME2	PATTERN2_SLOPER_T3				PATTERN2_SLOPER_T2
37h	PATTERN3_PAUSE_TIME	PATTERN3_PAUSE_T0				PATTERN3_PAUSE_T1
38h	PATTERN3_REPEAT_TIME	RESERVED				PATTERN3_PT
39h	PATTERN3_PWM0	PATTERN3_PWM0
3Ah	PATTERN3_PWM1	PATTERN3_PWM1
3Bh	PATTERN3_PWM2	PATTERN3_PWM2
3Ch	PATTERN3_PWM3	PATTERN3_PWM3
3Dh	PATTERN3_PWM4	PATTERN3_PWM4
3Eh	PATTERN3_SLOPER_TIME1	PATTERN3_SLOPER_T1				PATTERN3_SLOPER_T0
3Fh	PATTERN3_SLOPER_TIME2	PATTERN3_SLOPER_T3				PATTERN3_SLOPER_T2
40h	FLAG	RESERVED		OUT2_ENGINE_BUSY	OUT1_ENGINE_BUSY	OUT0_ENGINE_BUSY	ENGINE_BUSY	TSD	POR

Complex bit access types are encoded to fit into small table cells. Table 7-8 shows the codes that are used for access types in this section.

Table 7-8 Register Maps Access Type Codes

Access Type	Code	Description
Read Type
R	R	Read
Write Type
W	W	Write
W1C	W 1C	Write 1 to clear
Reset or Default Value
-n		Value after reset or the default value

7.6.1 CHIP_EN (Address = 0h) [Reset = 00h]

CHIP_EN is shown in Figure 7-17 and described in Table 7-9.

Return to the Summary Table.

Figure 7-17 CHIP_EN

7	6	5	4	3	2	1	0
RESERVED						INSTABLINK_DIS	CHIP_EN
R-0h						R/W-0h	R/W-0h

Table 7-9 CHIP_EN Field Descriptions

Bit	Field	Type	Reset	Description
7-2	RESERVED	R	0h	Reserved
1	INSTABLINK_DIS	R/W	0h	Instant blinking disable. 0x0 = Instant blinking enable 0x1 = Instant blinking disable
0	CHIP_EN	R/W	0h	Device enable. 0x0 = Disable 0x1 = Enable

7.6.2 DEV_CONFIG0 (Address = 1h) [Reset = 00h]

DEV_CONFIG0 is shown in Figure 7-18 and described in Table 7-10.

Return to the Summary Table.

Figure 7-18 DEV_CONFIG0

7	6	5	4	3	2	1	0
RESERVED							MAX_CURRENT
R-0h							R/W-0h

Table 7-10 DEV_CONFIG0 Field Descriptions

Bit	Field	Type	Reset	Description
7-1	RESERVED	R	0h	Reserved
0	MAX_CURRENT	R/W	0h	Max output current. 0x0 = 25.5mA 0x1 = 51mA

7.6.3 DEV_CONFIG1 (Address = 2h) [Reset = 00h]

DEV_CONFIG1 is shown in Figure 7-19 and described in Table 7-11.

Return to the Summary Table.

Figure 7-19 DEV_CONFIG1

7	6	5	4	3	2	1	0
RESERVED					OUT2_EN	OUT1_EN	OUT0_EN
R-0h					R/W-0h	R/W-0h	R/W-0h

Table 7-11 DEV_CONFIG1 Field Descriptions

Bit	Field	Type	Reset	Description
7-3	RESERVED	R	0h	Reserved
2	OUT2_EN	R/W	0h	OUT2 enable. 0x0 = Disable 0x1 = Enable
1	OUT1_EN	R/W	0h	OUT1 enable. 0x0 = Disable 0x1 = Enable
0	OUT0_EN	R/W	0h	OUT0 enable. 0x0 = Disable 0x1 = Enable

7.6.4 DEV_CONFIG2 (Address = 3h) [Reset = 00h]

DEV_CONFIG2 is shown in Figure 7-20 and described in Table 7-12.

Return to the Summary Table.

Figure 7-20 DEV_CONFIG2

7	6	5	4	3	2	1	0
LED_FADE_TIME				RESERVED	OUT2_FADE_EN	OUT1_FADE_EN	OUT0_FADE_EN
R/W-0h				R-0h	R/W-0h	R/W-0h	R/W-0h

Table 7-12 DEV_CONFIG2 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	LED_FADE_TIME	R/W	0h	OUT fade sloper time. 0x0 = 0s 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3	RESERVED	R	0h	Reserved
2	OUT2_FADE_EN	R/W	0h	OUT2 fade in and out enable. 0x0 = Disable 0x1 = Enable
1	OUT1_FADE_EN	R/W	0h	OUT1 fade in and out enable. 0x0 = Disable 0x1 = Enable
0	OUT0_FADE_EN	R/W	0h	OUT0 fade in and out enable. 0x0 = Disable 0x1 = Enable

7.6.5 DEV_CONFIG3 (Address = 4h) [Reset = 00h]

DEV_CONFIG3 is shown in Figure 7-21 and described in Table 7-13.

Return to the Summary Table.

Figure 7-21 DEV_CONFIG3

7	6	5	4	3	2	1	0
RESERVED	OUT2_EXP_EN	OUT1_EXP_EN	OUT0_EXP_EN	RESERVED	OUT2_AUTO_EN	OUT1_AUTO_EN	OUT0_AUTO_EN
R-0h	R/W-0h	R/W-0h	R/W-0h	R-0h	R/W-0h	R/W-0h	R/W-0h

Table 7-13 DEV_CONFIG3 Field Descriptions

Bit	Field	Type	Reset	Description
7	RESERVED	R	0h	Reserved
6	OUT2_EXP_EN	R/W	0h	OUT2 exponential PWM dimming enable. 0x0 = Disable 0x1 = Enable
5	OUT1_EXP_EN	R/W	0h	OUT1 exponential PWM dimming enable. 0x0 = Disable 0x1 = Enable
4	OUT0_EXP_EN	R/W	0h	OUT0 exponential PWM dimming enable. 0x0 = Disable 0x1 = Enable
3	RESERVED	R	0h	Reserved
2	OUT2_AUTO_EN	R/W	0h	OUT2 autonomous animation enable. 0x0 = Disable 0x1 = Enable
1	OUT1_AUTO_EN	R/W	0h	OUT1 autonomous animation enable. 0x0 = Disable 0x1 = Enable
0	OUT0_AUTO_EN	R/W	0h	OUT0 autonomous animation enable. 0x0 = Disable 0x1 = Enable

7.6.6 DEV_CONFIG4 (Address = 5h) [Reset = 00h]

DEV_CONFIG4 is shown in Figure 7-22 and described in Table 7-14.

Return to the Summary Table.

Figure 7-22 DEV_CONFIG4

7	6	5	4	3	2	1	0
RESERVED		OUT2_ENGINE_CH		OUT1_ENGINE_CH		OUT0_ENGINE_CH
R-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-14 DEV_CONFIG4 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	RESERVED	R	0h	Reserved
5-4	OUT2_ENGINE_CH	R/W	0h	OUT2 engine channel selection. 0x0 = ENGINE0 is selected 0x1 = ENGINE1 is selected 0x2 = ENGINE2 is selected 0x3 = ENGINE3 is selected
3-2	OUT1_ENGINE_CH	R/W	0h	OUT1 engine channel selection. 0x0 = ENGINE0 is selected 0x1 = ENGINE1 is selected 0x2 = ENGINE2 is selected 0x3 = ENGINE3 is selected
1-0	OUT0_ENGINE_CH	R/W	0h	OUT0 engine channel selection. 0x0 = ENGINE0 is selected 0x1 = ENGINE1 is selected 0x2 = ENGINE2 is selected 0x3 = ENGINE3 is selected

7.6.7 ENGINE_CONFIG0 (Address = 6h) [Reset = 00h]

ENGINE_CONFIG0 is shown in Figure 7-23 and described in Table 7-15.

Return to the Summary Table.

Figure 7-23 ENGINE_CONFIG0

7	6	5	4	3	2	1	0
ENGINE0_ORDER3		ENGINE0_ORDER2		ENGINE0_ORDER1		ENGINE0_ORDER0
R/W-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-15 ENGINE_CONFIG0 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	ENGINE0_ORDER3	R/W	0h	ENGINE0_ORDER3 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
5-4	ENGINE0_ORDER2	R/W	0h	ENGINE0_ORDER2 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
3-2	ENGINE0_ORDER1	R/W	0h	ENGINE0_ORDER1 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
1-0	ENGINE0_ORDER0	R/W	0h	ENGINE0_ORDER0 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected

7.6.8 ENGINE_CONFIG1 (Address = 7h) [Reset = 00h]

ENGINE_CONFIG1 is shown in Figure 7-24 and described in Table 7-16.

Return to the Summary Table.

Figure 7-24 ENGINE_CONFIG1

7	6	5	4	3	2	1	0
ENGINE1_ORDER3		ENGINE1_ORDER2		ENGINE1_ORDER1		ENGINE1_ORDER0
R/W-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-16 ENGINE_CONFIG1 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	ENGINE1_ORDER3	R/W	0h	ENGINE1_ORDER3 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
5-4	ENGINE1_ORDER2	R/W	0h	ENGINE1_ORDER2 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
3-2	ENGINE1_ORDER1	R/W	0h	ENGINE1_ORDER1 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
1-0	ENGINE1_ORDER0	R/W	0h	ENGINE1_ORDER0 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected

7.6.9 ENGINE_CONFIG2 (Address = 8h) [Reset = 00h]

ENGINE_CONFIG2 is shown in Figure 7-25 and described in Table 7-17.

Return to the Summary Table.

Figure 7-25 ENGINE_CONFIG2

7	6	5	4	3	2	1	0
ENGINE2_ORDER3		ENGINE2_ORDER2		ENGINE2_ORDER1		ENGINE2_ORDER0
R/W-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-17 ENGINE_CONFIG2 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	ENGINE2_ORDER3	R/W	0h	ENGINE2_ORDER3 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
5-4	ENGINE2_ORDER2	R/W	0h	ENGINE2_ORDER2 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
3-2	ENGINE2_ORDER1	R/W	0h	ENGINE2_ORDER1 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
1-0	ENGINE2_ORDER0	R/W	0h	ENGINE2_ORDER0 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected

7.6.10 ENGINE_CONFIG3 (Address = 9h) [Reset = 00h]

ENGINE_CONFIG3 is shown in Figure 7-26 and described in Table 7-18.

Return to the Summary Table.

Figure 7-26 ENGINE_CONFIG3

7	6	5	4	3	2	1	0
ENGINE3_ORDER3		ENGINE3_ORDER2		ENGINE3_ORDER1		ENGINE3_ORDER0
R/W-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-18 ENGINE_CONFIG3 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	ENGINE3_ORDER3	R/W	0h	ENGINE3_ORDER3 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
5-4	ENGINE3_ORDER2	R/W	0h	ENGINE3_ORDER2 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
3-2	ENGINE3_ORDER1	R/W	0h	ENGINE3_ORDER1 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected
1-0	ENGINE3_ORDER0	R/W	0h	ENGINE3_ORDER0 pattern selection. 0x0 = PATTERN0 is selected 0x1 = PATTERN1 is selected 0x2 = PATTERN2 is selected 0x3 = PATTERN3 is selected

7.6.11 ENGINE_CONFIG4 (Address = Ah) [Reset = 00h]

ENGINE_CONFIG4 is shown in Figure 7-27 and described in Table 7-19.

Return to the Summary Table.

Figure 7-27 ENGINE_CONFIG4

7	6	5	4	3	2	1	0
E1O3_EN	E1O2_EN	E1O1_EN	E1O0_EN	E0O3_EN	E0O2_EN	E0O1_EN	E0O0_EN
R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h

Table 7-19 ENGINE_CONFIG4 Field Descriptions

Bit	Field	Type	Reset	Description
7	E1O3_EN	R/W	0h	ENGINE1_ORDER3 enable. 0x0 = Disable 0x1 = Enable
6	E1O2_EN	R/W	0h	ENGINE1_ORDER2 enable. 0x0 = Disable 0x1 = Enable
5	E1O1_EN	R/W	0h	ENGINE1_ORDER1 enable. 0x0 = Disable 0x1 = Enable
4	E1O0_EN	R/W	0h	ENGINE1_ORDER0 enable. 0x0 = Disable 0x1 = Enable
3	E0O3_EN	R/W	0h	ENGINE0_ORDER3 enable. 0x0 = Disable 0x1 = Enable
2	E0O2_EN	R/W	0h	ENGINE0_ORDER2 enable. 0x0 = Disable 0x1 = Enable
1	E0O1_EN	R/W	0h	ENGINE0_ORDER1 enable. 0x0 = Disable 0x1 = Enable
0	E0O0_EN	R/W	0h	ENGINE0_ORDER0 enable. 0x0 = Disable 0x1 = Enable

7.6.12 ENGINE_CONFIG5 (Address = Bh) [Reset = 00h]

ENGINE_CONFIG5 is shown in Figure 7-28 and described in Table 7-20.

Return to the Summary Table.

Figure 7-28 ENGINE_CONFIG5

7	6	5	4	3	2	1	0
E3O3_EN	E3O2_EN	E3O1_EN	E3O0_EN	E2O3_EN	E2O2_EN	E2O1_EN	E2O0_EN
R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h	R/W-0h

Table 7-20 ENGINE_CONFIG5 Field Descriptions

Bit	Field	Type	Reset	Description
7	E3O3_EN	R/W	0h	ENGINE3_ORDER3 enable. 0x0 = Disable 0x1 = Enable
6	E3O2_EN	R/W	0h	ENGINE3_ORDER2 enable. 0x0 = Disable 0x1 = Enable
5	E3O1_EN	R/W	0h	ENGINE3_ORDER1 enable. 0x0 = Disable 0x1 = Enable
4	E3O0_EN	R/W	0h	ENGINE3_ORDER0 enable. 0x0 = Disable 0x1 = Enable
3	E2O3_EN	R/W	0h	ENGINE2_ORDER3 enable. 0x0 = Disable 0x1 = Enable
2	E2O2_EN	R/W	0h	ENGINE2_ORDER2 enable. 0x0 = Disable 0x1 = Enable
1	E2O1_EN	R/W	0h	ENGINE2_ORDER1 enable. 0x0 = Disable 0x1 = Enable
0	E2O0_EN	R/W	0h	ENGINE2_ORDER0 enable. 0x0 = Disable 0x1 = Enable

7.6.13 ENGINE_CONFIG6 (Address = Ch) [Reset = 00h]

ENGINE_CONFIG6 is shown in Figure 7-29 and described in Table 7-21.

Return to the Summary Table.

Figure 7-29 ENGINE_CONFIG6

7	6	5	4	3	2	1	0
ENGINE3_REPT		ENGINE2_REPT		ENGINE1_REPT		ENGINE0_REPT
R/W-0h		R/W-0h		R/W-0h		R/W-0h

Table 7-21 ENGINE_CONFIG6 Field Descriptions

Bit	Field	Type	Reset	Description
7-6	ENGINE3_REPT	R/W	0h	ENGINE3 repeat times. 0x0 = 0 times 0x1 = 1 times 0x2 = 2 times 0x3 = infinite times
5-4	ENGINE2_REPT	R/W	0h	ENGINE2 repeat times. 0x0 = 0 times 0x1 = 1 times 0x2 = 2 times 0x3 = infinite times
3-2	ENGINE1_REPT	R/W	0h	ENGINE1 repeat times. 0x0 = 0 times 0x1 = 1 times 0x2 = 2 times 0x3 = infinite times
1-0	ENGINE0_REPT	R/W	0h	ENGINE0 repeat times. 0x0 = 0 times 0x1 = 1 times 0x2 = 2 times 0x3 = infinite times

7.6.14 SHUTDOWN_CMD (Address = Dh) [Reset = 00h]

SHUTDOWN_CMD is shown in Figure 7-30 and described in Table 7-22.

Return to the Summary Table.

Figure 7-30 SHUTDOWN_CMD

7	6	5	4	3	2	1	0
SHUTDOWN
W-0h

Table 7-22 SHUTDOWN_CMD Field Descriptions

Bit	Field	Type	Reset	Description
7-0	SHUTDOWN	W	0h	0x33 = Enter shutdown mode

7.6.15 RESET_CMD (Address = Eh) [Reset = 00h]

RESET_CMD is shown in Figure 7-31 and described in Table 7-23.

Return to the Summary Table.

Figure 7-31 RESET_CMD

7	6	5	4	3	2	1	0
RESET
W-0h

Table 7-23 RESET_CMD Field Descriptions

Bit	Field	Type	Reset	Description
7-0	RESET	W	0h	0xCC = Reset all the registers to default value

7.6.16 UPDATE_CMD (Address = Fh) [Reset = 00h]

UPDATE_CMD is shown in Figure 7-32 and described in Table 7-24.

Return to the Summary Table.

Figure 7-32 UPDATE_CMD

7	6	5	4	3	2	1	0
UPDATE
W-0h

Table 7-24 UPDATE_CMD Field Descriptions

Bit	Field	Type	Reset	Description
7-0	UPDATE	W	0h	0x55 = Update all device configuration registers value

7.6.17 START_CMD (Address = 10h) [Reset = 00h]

START_CMD is shown in Figure 7-33 and described in Table 7-25.

Return to the Summary Table.

Figure 7-33 START_CMD

7	6	5	4	3	2	1	0
START
W-0h

Table 7-25 START_CMD Field Descriptions

Bit	Field	Type	Reset	Description
7-0	START	W	0h	0xFF = Start autonomous animation

7.6.18 STOP_CMD (Address = 11h) [Reset = 00h]

STOP_CMD is shown in Figure 7-34 and described in Table 7-26.

Return to the Summary Table.

Figure 7-34 STOP_CMD

7	6	5	4	3	2	1	0
STOP
W-0h

Table 7-26 STOP_CMD Field Descriptions

Bit	Field	Type	Reset	Description
7-0	STOP	W	0h	0xAA = Stop autonomous animation

7.6.19 PAUSE_CONTINUE (Address = 12h) [Reset = 00h]

PAUSE_CONTINUE is shown in Figure 7-35 and described in Table 7-27.

Return to the Summary Table.

Figure 7-35 PAUSE_CONTINUE

7	6	5	4	3	2	1	0
RESERVED							PAUSE_CONTINUE
R-0h							R/W-0h

Table 7-27 PAUSE_CONTINUE Field Descriptions

Bit	Field	Type	Reset	Description
7-1	RESERVED	R	0h	Reserved
0	PAUSE_CONTINUE	R/W	0h	Pause or continue autonomous animation. 0x0 = Continue 0x1 = Pause

7.6.20 FLAG_CLR (Address = 13h) [Reset = 00h]

FLAG_CLR is shown in Figure 7-36 and described in Table 7-28.

Return to the Summary Table.

Figure 7-36 FLAG_CLR

7	6	5	4	3	2	1	0
RESERVED						TSD_CLR	POR_CLR
R-0h						W1C-0h	W1C-0h

Table 7-28 FLAG_CLR Field Descriptions

Bit	Field	Type	Reset	Description
7-2	RESERVED	R	0h	Reserved
1	TSD_CLR	W1C	0h	Write 1 to clear TSD flag.
0	POR_CLR	W1C	0h	Write 1 to clear POR flag.

7.6.21 OUT0_DC (Address = 14h) [Reset = 00h]

OUT0_DC is shown in Figure 7-37 and described in Table 7-29.

Return to the Summary Table.

Figure 7-37 OUT0_DC

7	6	5	4	3	2	1	0
OUT0_DC
R/W-0h

Table 7-29 OUT0_DC Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT0_DC	R/W	0h	OUT0 DC setting.

7.6.22 OUT1_DC (Address = 15h) [Reset = 00h]

OUT1_DC is shown in Figure 7-38 and described in Table 7-30.

Return to the Summary Table.

Figure 7-38 OUT1_DC

7	6	5	4	3	2	1	0
OUT1_DC
R/W-0h

Table 7-30 OUT1_DC Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT1_DC	R/W	0h	OUT1 DC setting.

7.6.23 OUT2_DC (Address = 16h) [Reset = 00h]

OUT2_DC is shown in Figure 7-39 and described in Table 7-31.

Return to the Summary Table.

Figure 7-39 OUT2_DC

7	6	5	4	3	2	1	0
OUT2_DC
R/W-0h

Table 7-31 OUT2_DC Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT2_DC	R/W	0h	OUT2 DC setting.

7.6.24 OUT0_MANUAL_PWM (Address = 18h) [Reset = 00h]

OUT0_MANUAL_PWM is shown in Figure 7-40 and described in Table 7-32.

Return to the Summary Table.

Figure 7-40 OUT0_MANUAL_PWM

7	6	5	4	3	2	1	0
OUT0_MANUAL_PWM
R/W-0h

Table 7-32 OUT0_MANUAL_PWM Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT0_MANUAL_PWM	R/W	0h	OUT0 manual PWM setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.25 OUT1_MANUAL_PWM (Address = 19h) [Reset = 00h]

OUT1_MANUAL_PWM is shown in Figure 7-41 and described in Table 7-33.

Return to the Summary Table.

Figure 7-41 OUT1_MANUAL_PWM

7	6	5	4	3	2	1	0
OUT1_MANUAL_PWM
R/W-0h

Table 7-33 OUT1_MANUAL_PWM Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT1_MANUAL_PWM	R/W	0h	OUT1 manual PWM setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.26 OUT2_MANUAL_PWM (Address = 1Ah) [Reset = 00h]

OUT2_MANUAL_PWM is shown in Figure 7-42 and described in Table 7-34.

Return to the Summary Table.

Figure 7-42 OUT2_MANUAL_PWM

7	6	5	4	3	2	1	0
OUT2_MANUAL_PWM
R/W-0h

Table 7-34 OUT2_MANUAL_PWM Field Descriptions

Bit	Field	Type	Reset	Description
7-0	OUT2_MANUAL_PWM	R/W	0h	OUT2 manual PWM setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.27 PATTERN0_PAUSE_TIME (Address = 1Ch) [Reset = 00h]

PATTERN0_PAUSE_TIME is shown in Figure 7-43 and described in Table 7-35.

Return to the Summary Table.

Figure 7-43 PATTERN0_PAUSE_TIME

7	6	5	4	3	2	1	0
PATTERN0_PAUSE_T0				PATTERN0_PAUSE_T1
R/W-0h				R/W-0h

Table 7-35 PATTERN0_PAUSE_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN0_PAUSE_T0	R/W	0h	Start animation pause time of pattern0. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN0_PAUSE_T1	R/W	0h	End animation pause time of pattern0. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.28 PATTERN0_REPEAT_TIME (Address = 1Dh) [Reset = 00h]

PATTERN0_REPEAT_TIME is shown in Figure 7-44 and described in Table 7-36.

Return to the Summary Table.

Figure 7-44 PATTERN0_REPEAT_TIME

7	6	5	4	3	2	1	0
RESERVED				PATTERN0_PT
R-0h				R/W-0h

Table 7-36 PATTERN0_REPEAT_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	RESERVED	R	0h	Reserved
3-0	PATTERN0_PT	R/W	0h	Pattern0 repeat times. 0x0 = 0 time 0x1 = 1 time 0x2 = 2 times 0x3 = 3 times 0x4 = 4 times 0x5 = 5 times 0x6 = 6 times 0x7 = 7 times 0x8 = 8 times 0x9 = 9 times 0xA = 10 times 0xB = 11 times 0xC = 12 times 0xD = 13 times 0xE = 14 times 0xF = infinite times

7.6.29 PATTERN0_PWM0 (Address = 1Eh) [Reset = 00h]

PATTERN0_PWM0 is shown in Figure 7-45 and described in Table 7-37.

Return to the Summary Table.

Figure 7-45 PATTERN0_PWM0

7	6	5	4	3	2	1	0
PATTERN0_PWM0
R/W-0h

Table 7-37 PATTERN0_PWM0 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN0_PWM0	R/W	0h	Pattern0 PWM0 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.30 PATTERN0_PWM1 (Address = 1Fh) [Reset = 00h]

PATTERN0_PWM1 is shown in Figure 7-46 and described in Table 7-38.

Return to the Summary Table.

Figure 7-46 PATTERN0_PWM1

7	6	5	4	3	2	1	0
PATTERN0_PWM1
R/W-0h

Table 7-38 PATTERN0_PWM1 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN0_PWM1	R/W	0h	Pattern0 PWM1 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.31 PATTERN0_PWM2 (Address = 20h) [Reset = 00h]

PATTERN0_PWM2 is shown in Figure 7-47 and described in Table 7-39.

Return to the Summary Table.

Figure 7-47 PATTERN0_PWM2

7	6	5	4	3	2	1	0
PATTERN0_PWM2
R/W-0h

Table 7-39 PATTERN0_PWM2 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN0_PWM2	R/W	0h	Pattern0 PWM2 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.32 PATTERN0_PWM3 (Address = 21h) [Reset = 00h]

PATTERN0_PWM3 is shown in Figure 7-48 and described in Table 7-40.

Return to the Summary Table.

Figure 7-48 PATTERN0_PWM3

7	6	5	4	3	2	1	0
PATTERN0_PWM3
R/W-0h

Table 7-40 PATTERN0_PWM3 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN0_PWM3	R/W	0h	Pattern0 PWM3 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.33 PATTERN0_PWM4 (Address = 22h) [Reset = 00h]

PATTERN0_PWM4 is shown in Figure 7-49 and described in Table 7-41.

Return to the Summary Table.

Figure 7-49 PATTERN0_PWM4

7	6	5	4	3	2	1	0
PATTERN0_PWM4
R/W-0h

Table 7-41 PATTERN0_PWM4 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN0_PWM4	R/W	0h	Pattern0 PWM4 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.34 PATTERN0_SLOPER_TIME1 (Address = 23h) [Reset = 00h]

PATTERN0_SLOPER_TIME1 is shown in Figure 7-50 and described in Table 7-42.

Return to the Summary Table.

Figure 7-50 PATTERN0_SLOPER_TIME1

7	6	5	4	3	2	1	0
PATTERN0_SLOPER_T1				PATTERN0_SLOPER_T0
R/W-0h				R/W-0h

Table 7-42 PATTERN0_SLOPER_TIME1 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN0_SLOPER_T1	R/W	0h	Pattern0 sloper time 1 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN0_SLOPER_T0	R/W	0h	Pattern0 sloper time 0 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.35 PATTERN0_SLOPER_TIME2 (Address = 24h) [Reset = 00h]

PATTERN0_SLOPER_TIME2 is shown in Figure 7-51 and described in Table 7-43.

Return to the Summary Table.

Figure 7-51 PATTERN0_SLOPER_TIME2

7	6	5	4	3	2	1	0
PATTERN0_SLOPER_T3				PATTERN0_SLOPER_T2
R/W-0h				R/W-0h

Table 7-43 PATTERN0_SLOPER_TIME2 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN0_SLOPER_T3	R/W	0h	Pattern0 sloper time 3 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN0_SLOPER_T2	R/W	0h	Pattern0 sloper time 2 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.36 PATTERN1_PAUSE_TIME (Address = 25h) [Reset = 00h]

PATTERN1_PAUSE_TIME is shown in Figure 7-52 and described in Table 7-44.

Return to the Summary Table.

Figure 7-52 PATTERN1_PAUSE_TIME

7	6	5	4	3	2	1	0
PATTERN1_PAUSE_T0				PATTERN1_PAUSE_T1
R/W-0h				R/W-0h

Table 7-44 PATTERN1_PAUSE_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN1_PAUSE_T0	R/W	0h	Start animation pause time of pattern1. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN1_PAUSE_T1	R/W	0h	End animation pause time of pattern1. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.37 PATTERN1_REPEAT_TIME (Address = 26h) [Reset = 00h]

PATTERN1_REPEAT_TIME is shown in Figure 7-53 and described in Table 7-45.

Return to the Summary Table.

Figure 7-53 PATTERN1_REPEAT_TIME

7	6	5	4	3	2	1	0
RESERVED				PATTERN1_PT
R-0h				R/W-0h

Table 7-45 PATTERN1_REPEAT_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	RESERVED	R	0h	Reserved
3-0	PATTERN1_PT	R/W	0h	Pattern1 repeat times. 0x0 = 0 time 0x1 = 1 time 0x2 = 2 times 0x3 = 3 times 0x4 = 4 times 0x5 = 5 times 0x6 = 6 times 0x7 = 7 times 0x8 = 8 times 0x9 = 9 times 0xA = 10 times 0xB = 11 times 0xC = 12 times 0xD = 13 times 0xE = 14 times 0xF = infinite times

7.6.38 PATTERN1_PWM0 (Address = 27h) [Reset = 00h]

PATTERN1_PWM0 is shown in Figure 7-54 and described in Table 7-46.

Return to the Summary Table.

Figure 7-54 PATTERN1_PWM0

7	6	5	4	3	2	1	0
PATTERN1_PWM0
R/W-0h

Table 7-46 PATTERN1_PWM0 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN1_PWM0	R/W	0h	Pattern1 PWM0 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.39 PATTERN1_PWM1 (Address = 28h) [Reset = 00h]

PATTERN1_PWM1 is shown in Figure 7-55 and described in Table 7-47.

Return to the Summary Table.

Figure 7-55 PATTERN1_PWM1

7	6	5	4	3	2	1	0
PATTERN1_PWM1
R/W-0h

Table 7-47 PATTERN1_PWM1 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN1_PWM1	R/W	0h	Pattern1 PWM1 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.40 PATTERN1_PWM2 (Address = 29h) [Reset = 00h]

PATTERN1_PWM2 is shown in Figure 7-56 and described in Table 7-48.

Return to the Summary Table.

Figure 7-56 PATTERN1_PWM2

7	6	5	4	3	2	1	0
PATTERN1_PWM2
R/W-0h

Table 7-48 PATTERN1_PWM2 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN1_PWM2	R/W	0h	Pattern1 PWM2 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.41 PATTERN1_PWM3 (Address = 2Ah) [Reset = 00h]

PATTERN1_PWM3 is shown in Figure 7-57 and described in Table 7-49.

Return to the Summary Table.

Figure 7-57 PATTERN1_PWM3

7	6	5	4	3	2	1	0
PATTERN1_PWM3
R/W-0h

Table 7-49 PATTERN1_PWM3 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN1_PWM3	R/W	0h	Pattern1 PWM3 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.42 PATTERN1_PWM4 (Address = 2Bh) [Reset = 00h]

PATTERN1_PWM4 is shown in Figure 7-58 and described in Table 7-50.

Return to the Summary Table.

Figure 7-58 PATTERN1_PWM4

7	6	5	4	3	2	1	0
PATTERN1_PWM4
R/W-0h

Table 7-50 PATTERN1_PWM4 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN1_PWM4	R/W	0h	Pattern1 PWM4 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.43 PATTERN1_SLOPER_TIME1 (Address = 2Ch) [Reset = 00h]

PATTERN1_SLOPER_TIME1 is shown in Figure 7-59 and described in Table 7-51.

Return to the Summary Table.

Figure 7-59 PATTERN1_SLOPER_TIME1

7	6	5	4	3	2	1	0
PATTERN1_SLOPER_T1				PATTERN1_SLOPER_T0
R/W-0h				R/W-0h

Table 7-51 PATTERN1_SLOPER_TIME1 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN1_SLOPER_T1	R/W	0h	Pattern1 sloper time 1 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN1_SLOPER_T0	R/W	0h	Pattern1 sloper time 0 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.44 PATTERN1_SLOPER_TIME2 (Address = 2Dh) [Reset = 00h]

PATTERN1_SLOPER_TIME2 is shown in Figure 7-60 and described in Table 7-52.

Return to the Summary Table.

Figure 7-60 PATTERN1_SLOPER_TIME2

7	6	5	4	3	2	1	0
PATTERN1_SLOPER_T3				PATTERN1_SLOPER_T2
R/W-0h				R/W-0h

Table 7-52 PATTERN1_SLOPER_TIME2 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN1_SLOPER_T3	R/W	0h	Pattern1 sloper time 3 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN1_SLOPER_T2	R/W	0h	Pattern1 sloper time 2 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.45 PATTERN2_PAUSE_TIME (Address = 2Eh) [Reset = 00h]

PATTERN2_PAUSE_TIME is shown in Figure 7-61 and described in Table 7-53.

Return to the Summary Table.

Figure 7-61 PATTERN2_PAUSE_TIME

7	6	5	4	3	2	1	0
PATTERN2_PAUSE_T0				PATTERN2_PAUSE_T1
R/W-0h				R/W-0h

Table 7-53 PATTERN2_PAUSE_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN2_PAUSE_T0	R/W	0h	Start animation pause time of pattern2. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN2_PAUSE_T1	R/W	0h	End animation pause time of pattern2. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.46 PATTERN2_REPEAT_TIME (Address = 2Fh) [Reset = 00h]

PATTERN2_REPEAT_TIME is shown in Figure 7-62 and described in Table 7-54.

Return to the Summary Table.

Figure 7-62 PATTERN2_REPEAT_TIME

7	6	5	4	3	2	1	0
RESERVED				PATTERN2_PT
R-0h				R/W-0h

Table 7-54 PATTERN2_REPEAT_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	RESERVED	R	0h	Reserved
3-0	PATTERN2_PT	R/W	0h	Pattern2 repeat times. 0x0 = 0 time 0x1 = 1 time 0x2 = 2 times 0x3 = 3 times 0x4 = 4 times 0x5 = 5 times 0x6 = 6 times 0x7 = 7 times 0x8 = 8 times 0x9 = 9 times 0xA = 10 times 0xB = 11 times 0xC = 12 times 0xD = 13 times 0xE = 14 times 0xF = infinite times

7.6.47 PATTERN2_PWM0 (Address = 30h) [Reset = 00h]

PATTERN2_PWM0 is shown in Figure 7-63 and described in Table 7-55.

Return to the Summary Table.

Figure 7-63 PATTERN2_PWM0

7	6	5	4	3	2	1	0
PATTERN2_PWM0
R/W-0h

Table 7-55 PATTERN2_PWM0 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN2_PWM0	R/W	0h	Pattern2 PWM0 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.48 PATTERN2_PWM1 (Address = 31h) [Reset = 00h]

PATTERN2_PWM1 is shown in Figure 7-64 and described in Table 7-56.

Return to the Summary Table.

Figure 7-64 PATTERN2_PWM1

7	6	5	4	3	2	1	0
PATTERN2_PWM1
R/W-0h

Table 7-56 PATTERN2_PWM1 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN2_PWM1	R/W	0h	Pattern2 PWM1 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.49 PATTERN2_PWM2 (Address = 32h) [Reset = 00h]

PATTERN2_PWM2 is shown in Figure 7-65 and described in Table 7-57.

Return to the Summary Table.

Figure 7-65 PATTERN2_PWM2

7	6	5	4	3	2	1	0
PATTERN2_PWM2
R/W-0h

Table 7-57 PATTERN2_PWM2 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN2_PWM2	R/W	0h	Pattern2 PWM2 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.50 PATTERN2_PWM3 (Address = 33h) [Reset = 00h]

PATTERN2_PWM3 is shown in Figure 7-66 and described in Table 7-58.

Return to the Summary Table.

Figure 7-66 PATTERN2_PWM3

7	6	5	4	3	2	1	0
PATTERN2_PWM3
R/W-0h

Table 7-58 PATTERN2_PWM3 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN2_PWM3	R/W	0h	Pattern2 PWM3 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.51 PATTERN2_PWM4 (Address = 34h) [Reset = 00h]

PATTERN2_PWM4 is shown in Figure 7-67 and described in Table 7-59.

Return to the Summary Table.

Figure 7-67 PATTERN2_PWM4

7	6	5	4	3	2	1	0
PATTERN2_PWM4
R/W-0h

Table 7-59 PATTERN2_PWM4 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN2_PWM4	R/W	0h	Pattern2 PWM4 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.52 PATTERN2_SLOPER_TIME1 (Address = 35h) [Reset = 00h]

PATTERN2_SLOPER_TIME1 is shown in Figure 7-68 and described in Table 7-60.

Return to the Summary Table.

Figure 7-68 PATTERN2_SLOPER_TIME1

7	6	5	4	3	2	1	0
PATTERN2_SLOPER_T1				PATTERN2_SLOPER_T0
R/W-0h				R/W-0h

Table 7-60 PATTERN2_SLOPER_TIME1 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN2_SLOPER_T1	R/W	0h	Pattern2 sloper time 1 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN2_SLOPER_T0	R/W	0h	Pattern2 sloper time 0 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.53 PATTERN2_SLOPER_TIME2 (Address = 36h) [Reset = 00h]

PATTERN2_SLOPER_TIME2 is shown in Figure 7-69 and described in Table 7-61.

Return to the Summary Table.

Figure 7-69 PATTERN2_SLOPER_TIME2

7	6	5	4	3	2	1	0
PATTERN2_SLOPER_T3				PATTERN2_SLOPER_T2
R/W-0h				R/W-0h

Table 7-61 PATTERN2_SLOPER_TIME2 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN2_SLOPER_T3	R/W	0h	Pattern2 sloper time 3 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN2_SLOPER_T2	R/W	0h	Pattern2 sloper time 2 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.54 PATTERN3_PAUSE_TIME (Address = 37h) [Reset = 00h]

PATTERN3_PAUSE_TIME is shown in Figure 7-70 and described in Table 7-62.

Return to the Summary Table.

Figure 7-70 PATTERN3_PAUSE_TIME

7	6	5	4	3	2	1	0
PATTERN3_PAUSE_T0				PATTERN3_PAUSE_T1
R/W-0h				R/W-0h

Table 7-62 PATTERN3_PAUSE_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN3_PAUSE_T0	R/W	0h	Start animation pause time of pattern3. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN3_PAUSE_T1	R/W	0h	End animation pause time of pattern3. 0x0 = no pause time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.55 PATTERN3_REPEAT_TIME (Address = 38h) [Reset = 00h]

PATTERN3_REPEAT_TIME is shown in Figure 7-71 and described in Table 7-63.

Return to the Summary Table.

Figure 7-71 PATTERN3_REPEAT_TIME

7	6	5	4	3	2	1	0
RESERVED				PATTERN3_PT
R-0h				R/W-0h

Table 7-63 PATTERN3_REPEAT_TIME Field Descriptions

Bit	Field	Type	Reset	Description
7-4	RESERVED	R	0h	Reserved
3-0	PATTERN3_PT	R/W	0h	Pattern3 repeat times. 0x0 = 0 time 0x1 = 1 time 0x2 = 2 times 0x3 = 3 times 0x4 = 4 times 0x5 = 5 times 0x6 = 6 times 0x7 = 7 times 0x8 = 8 times 0x9 = 9 times 0xA = 10 times 0xB = 11 times 0xC = 12 times 0xD = 13 times 0xE = 14 times 0xF = infinite times

7.6.56 PATTERN3_PWM0 (Address = 39h) [Reset = 00h]

PATTERN3_PWM0 is shown in Figure 7-72 and described in Table 7-64.

Return to the Summary Table.

Figure 7-72 PATTERN3_PWM0

7	6	5	4	3	2	1	0
PATTERN3_PWM0
R/W-0h

Table 7-64 PATTERN3_PWM0 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN3_PWM0	R/W	0h	Pattern3 PWM0 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.57 PATTERN3_PWM1 (Address = 3Ah) [Reset = 00h]

PATTERN3_PWM1 is shown in Figure 7-73 and described in Table 7-65.

Return to the Summary Table.

Figure 7-73 PATTERN3_PWM1

7	6	5	4	3	2	1	0
PATTERN3_PWM1
R/W-0h

Table 7-65 PATTERN3_PWM1 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN3_PWM1	R/W	0h	Pattern3 PWM1 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.58 PATTERN3_PWM2 (Address = 3Bh) [Reset = 00h]

PATTERN3_PWM2 is shown in Figure 7-74 and described in Table 7-66.

Return to the Summary Table.

Figure 7-74 PATTERN3_PWM2

7	6	5	4	3	2	1	0
PATTERN3_PWM2
R/W-0h

Table 7-66 PATTERN3_PWM2 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN3_PWM2	R/W	0h	Pattern3 PWM2 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.59 PATTERN3_PWM3 (Address = 3Ch) [Reset = 00h]

PATTERN3_PWM3 is shown in Figure 7-75 and described in Table 7-67.

Return to the Summary Table.

Figure 7-75 PATTERN3_PWM3

7	6	5	4	3	2	1	0
PATTERN3_PWM3
R/W-0h

Table 7-67 PATTERN3_PWM3 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN3_PWM3	R/W	0h	Pattern3 PWM3 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.60 PATTERN3_PWM4 (Address = 3Dh) [Reset = 00h]

PATTERN3_PWM4 is shown in Figure 7-76 and described in Table 7-68.

Return to the Summary Table.

Figure 7-76 PATTERN3_PWM4

7	6	5	4	3	2	1	0
PATTERN3_PWM4
R/W-0h

Table 7-68 PATTERN3_PWM4 Field Descriptions

Bit	Field	Type	Reset	Description
7-0	PATTERN3_PWM4	R/W	0h	Pattern3 PWM4 setting. 0x00 = 0% ... 0x80 = 50% ... 0xFF = 100%

7.6.61 PATTERN3_SLOPER_TIME1 (Address = 3Eh) [Reset = 00h]

PATTERN3_SLOPER_TIME1 is shown in Figure 7-77 and described in Table 7-69.

Return to the Summary Table.

Figure 7-77 PATTERN3_SLOPER_TIME1

7	6	5	4	3	2	1	0
PATTERN3_SLOPER_T1				PATTERN3_SLOPER_T0
R/W-0h				R/W-0h

Table 7-69 PATTERN3_SLOPER_TIME1 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN3_SLOPER_T1	R/W	0h	Pattern3 sloper time 1 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN3_SLOPER_T0	R/W	0h	Pattern3 sloper time 0 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.62 PATTERN3_SLOPER_TIME2 (Address = 3Fh) [Reset = 00h]

PATTERN3_SLOPER_TIME2 is shown in Figure 7-78 and described in Table 7-70.

Return to the Summary Table.

Figure 7-78 PATTERN3_SLOPER_TIME2

7	6	5	4	3	2	1	0
PATTERN3_SLOPER_T3				PATTERN3_SLOPER_T2
R/W-0h				R/W-0h

Table 7-70 PATTERN3_SLOPER_TIME2 Field Descriptions

Bit	Field	Type	Reset	Description
7-4	PATTERN3_SLOPER_T3	R/W	0h	Pattern3 sloper time 3 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s
3-0	PATTERN3_SLOPER_T2	R/W	0h	Pattern3 sloper time 2 setting. 0x0 = no sloper time 0x1 = 0.05s 0x2 = 0.10s 0x3 = 0.15s 0x4 = 0.20s 0x5 = 0.25s 0x6 = 0.30s 0x7 = 0.35s 0x8 = 0.40s 0x9 = 0.45s 0xA = 0.50s 0xB = 1.00s 0xC = 2.00s 0xD = 4.00s 0xE = 6.00s 0xF = 8.00s

7.6.63 FLAG (Address = 40h) [Reset = 00h]

FLAG is shown in Figure 7-79 and described in Table 7-71.

Return to the Summary Table.

Figure 7-79 FLAG

7	6	5	4	3	2	1	0
RESERVED		OUT2_ENGINE_BUSY	OUT1_ENGINE_BUSY	OUT0_ENGINE_BUSY	ENGINE_BUSY	TSD	POR
R-0h		R-0h	R-0h	R-0h	R-0h	R-0h	R-0h

Table 7-71 FLAG Field Descriptions

Bit	Field	Type	Reset	Description
7-6	RESERVED	R	0h	Reserved
5	OUT2_ENGINE_BUSY	R	0h	Engine selected by OUT2 busy flag. 0x0 = The selected Engine is not running 0x1 = The selected Engine is running
4	OUT1_ENGINE_BUSY	R	0h	Engine selected by OUT1 busy flag 0x0 = The selected Engine is not running 0x1 = The selected Engine is running
3	OUT0_ENGINE_BUSY	R	0h	Engine selected by OUT0 busy flag. 0x0 = The selected Engine is not running 0x1 = The selected Engine is running
2	ENGINE_BUSY	R	0h	Engine busy flag. 0x0 = All 4 engines are not running 0x1 = At leaset 1 engine is running
1	TSD	R	0h	TSD flag. 0x0 = TSD is not triggered 0x1 = TSD is triggered
0	POR	R	0h	POR flag. 0x0 = POR is not triggered 0x1 = POR is triggered