SLVSCS1B March   2015  – May 2015 UCD7138

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Simplified Schematic
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Body-Diode Conduction Detection
      2. 8.3.2 Gate Turnon and Turnoff
      3. 8.3.3 VCC and Undervoltage Lockout
      4. 8.3.4 Operating Supply Current
      5. 8.3.5 Driver Stage
    4. 8.4 Device Functional Modes
      1. 8.4.1 UVLO Mode
      2. 8.4.2 Normal Operation Mode
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Half-Bridge LLC
        1. 9.2.1.1 Design Requirements
          1. 9.2.1.1.1 Gate Input
          2. 9.2.1.1.2 Gate Output
          3. 9.2.1.1.3 Drain-to-Source Voltage Sensing
          4. 9.2.1.1.4 DTC Output
          5. 9.2.1.1.5 Turn-on Edge Optimization
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Design Without SR-Control Optimization
          2. 9.2.1.2.2 Setting the DTC Detection Window
          3. 9.2.1.2.3 Setting the Clamps
          4. 9.2.1.2.4 Setting the DTC Optimization Target and Hysteresis
          5. 9.2.1.2.5 Setting the DTC Negative Current Fault Protection
        3. 9.2.1.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Community Resource
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

10 Power Supply Recommendations

Because the driver draws current from the VCC pin to bias all internal circuits, for the best high-speed circuit performance, two VCC bypass capacitors are recommended to prevent noise problems. The use of surface-mount (SM) components is highly recommended. A 1μF ceramic capacitor should be placed as close as possible to the VCC to ground pad of the gate driver.