SLRS027R Data sheet

SLRS027R December 1976 – February 2024 ULN2002A , ULN2003A , ULN2003AI , ULN2004A , ULQ2003A , ULQ2004A

PRODUCTION DATA

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)

NS|16
N|16
D|16

Thermal pad, mechanical data (Package|Pins)

D|16
- QFND167D

Orderable Information

5.1 Absolute Maximum Ratings

at 25°C free-air temperature (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_CC	Collector-emitter voltage			50	V
	Clamp diode reverse voltage⁽²⁾			50	V
V_I	Input voltage⁽²⁾			30	V
	Peak collector current, See Figure 5-4 and Figure 5-5			500	mA
I_OK	Output clamp current			500	mA
	Total emitter-terminal current			–2.5	A
T_A	Operating free-air temperature range	ULN200xA	–40	70	°C
		ULN200xAI	–40	105
		ULQ200xA	–40	85
		ULQ200xAT	–40	105
T_J	Operating virtual junction temperature			150	°C
	Lead temperature for 1.6 mm (1/16 inch) from case for 10 seconds			260	°C
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values are with respect to the emitter/substrate terminal E, unless otherwise noted.