JAJSNI3D december   2021  – august 2023 TPS7A14

PRODUCTION DATA  

  1.   1
  2. 1特長
  3. 2アプリケーション
  4. 3概要
  5. 4Revision History
  6. 5Pin Configuration and Functions
  7. 6Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Typical Characteristics
  8. 7Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Excellent Transient Response
      2. 7.3.2 Global Undervoltage Lockout (UVLO)
      3. 7.3.3 Enable Input
      4. 7.3.4 Internal Foldback Current Limit
      5. 7.3.5 Active Discharge
      6. 7.3.6 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Normal Operation
      2. 7.4.2 Dropout Operation
      3. 7.4.3 Disable Mode
  9. 8Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1  Recommended Capacitor Types
      2. 8.1.2  Input, Output, and Bias Capacitor Requirements
      3. 8.1.3  Dropout Voltage
      4. 8.1.4  Behavior During Transition From Dropout Into Regulation
      5. 8.1.5  Device Enable Sequencing Requirement
      6. 8.1.6  Load Transient Response
      7. 8.1.7  Undervoltage Lockout Circuit Operation
      8. 8.1.8  Power Dissipation (PD)
      9. 8.1.9  Estimating Junction Temperature
      10. 8.1.10 Recommended Area for Continuous Operation
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Examples
  10. 9Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
        1. 9.1.1.1 Evaluation Module
      2. 9.1.2 Device Nomenclature
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 ドキュメントの更新通知を受け取る方法
    4. 9.4 サポート・リソース
    5. 9.5 Trademarks
    6. 9.6 静電気放電に関する注意事項
    7. 9.7 用語集
  11.   Mechanical, Packaging, and Orderable Information
    1. 10.1 Mechanical Data

パッケージ・オプション

デバイスごとのパッケージ図は、PDF版データシートをご参照ください。

メカニカル・データ（パッケージ｜ピン）
  • DRV|6
  • YBK|6
サーマルパッド・メカニカル・データ
発注情報

5 Pin Configuration and Functions

GUID-20211202-CA0I-BFL5-3MMC-61FFTTZZ1CL6-low.svgFigure 5-1 YBK Package,6-Pin WCSP(Top View)
Table 5-1 Pin Functions: YBK Package
PINTYPEDESCRIPTION
NO.NAME
A1OUTOutputRegulated output pin. A 2.2-µF or greater capacitance is required from OUT to ground for stability. For best transient response, use an 8-µF (nominal) or larger ceramic capacitor from OUT to ground. Place the output capacitor as close to OUT as possible.
A2INInputInput pin. A 0.75-µF or greater capacitance is required from IN to ground for stability. Place the input capacitor as close to IN as possible.
B1SENSEInputSENSE input. This pin is a feedback input to the regulator for SENSE connections. Connecting SENSE to the load helps eliminate voltage errors resulting from trace resistance between OUT and the load.
B2ENInputEnable pin. Driving this pin to logic high enables the LDO. Driving this pin to logic low disables the LDO. If enable functionality is not required, EN must be connected to IN or BIAS.
C1GND—Ground pin. This pin must be connected to ground.
C2BIASInputBIAS pin. This pin enables operation in low-input voltage, low-output voltage (LILO) conditions. For best performance, use 0.47-µF or larger ceramic capacitor from BIAS to ground. Place the bias capacitor as close to BIAS as possible.
GUID-20230522-SS0I-HVPN-DWHL-G1FKQNG7W4KS-low.svgFigure 5-2 DRV Package,6-Pin WSON With Exposed Thermal Pad(Top View)
Table 5-2 Pin Functions: DRV Package
PINTYPEDESCRIPTION
NO.NAME
1OUTOutputRegulated output pin. A 2.2-µF or greater capacitance is required from OUT to ground for stability. For best transient response, use an 8-µF (nominal) or larger ceramic capacitor from OUT to ground. Place the output capacitor as close to OUT as possible.
2SENSEInputSENSE input. This pin is a feedback input to the regulator for SENSE connections. Connecting SENSE to the load helps eliminate voltage errors resulting from trace resistance between OUT and the load.
3ENInputEnable pin. Driving this pin to logic high enables the LDO. Driving this pin to logic low disables the LDO. If enable functionality is not required, EN must be connected to IN or BIAS.
4BIASInputBIAS pin. This pin enables operation in LILO conditions. For best performance, use 0.47-µF or larger ceramic capacitor from BIAS to ground. Place the bias capacitor as close to BIAS as possible.
5GND—Ground pin. This pin must be connected to ground.
6INInputInput pin. A 0.75-µF or greater capacitance is required from IN to ground for stability. Place the input capacitor as close to IN as possible.
Thermal Pad—The thermal pad is electrically connected to the GND node. Connect to the GND plane for improved thermal performance.