SLAAE64 may   2023 AFE58JD48 , DAC81001 , DAC8801 , DAC8830 , OPA2210 , REF5010 , REF5040 , THS4130

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Proposed Topologies
    1. 2.1 Proposal 1: Using R-2R DAC (DAC8830)
      1. 2.1.1 Highlighted Products
        1. 2.1.1.1 DAC8830
        2. 2.1.1.2 OPA2210
        3. 2.1.1.3 THS4130
        4. 2.1.1.4 REF5040
      2. 2.1.2 Design Circuit
      3. 2.1.3 PSpice-TI Simulation
    2. 2.2 Proposal 2: Using M-DAC (DAC8801)
      1. 2.2.1 Highlighted Products
        1. 2.2.1.1 DAC8801
        2. 2.2.1.2 OPA2210
        3. 2.2.1.3 THS4130
        4. 2.2.1.4 REF5010
      2. 2.2.2 Design Circuit
      3. 2.2.3 PSpice-TI Simulation
    3. 2.3 Proposal 3: Using Low-Noise R-2R DAC (DAC81001)
      1. 2.3.1 Highlighted Products
        1. 2.3.1.1 DAC81001
        2. 2.3.1.2 OPA2210
        3. 2.3.1.3 THS4130
        4. 2.3.1.4 REF5010
      2. 2.3.2 Design Circuit
      3. 2.3.3 PSpice-TI Simulation
  6. 3Conclusion
  7. 4References

PSpice-TI Simulation

Download the PSpice-TI simulation models for the relevant components from https://www.ti.com. Figure 2-14 shows the PSpice -TI simulation for the entire circuit.


GUID-2D630239-CFE8-4CB7-A318-568DB0A37364-low.png

Figure 2-14 PSpice-TI Simulation of the Proposal 3-VCNTL Drive Circuit

GUID-20221116-SS0I-HNGK-DHLJ-KKXCSHWWRNXG-low.png

Figure 2-15 Noise Contribution of the Proposal 3 Circuit

Figure 2-15 shows the noise contribution of the circuit. The output noise of 0.968 nV/√Hz at 1 kHz indicates that such a drive circuit can drive less than 192 channels simultaneously.