SLAU858B December   2023  – June 2025 AFE881H1

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  6. 2Hardware
    1. 2.1 Hardware Description
      1. 2.1.1 Theory of Operation
      2. 2.1.2 Signal Definitions
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  7. 3Software
    1. 3.1 Software Setup
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE881H1 Register Page
  8. 4Hardware Design Files
    1. 4.1 Board Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation
  11. 7Revision History

3.2.2.1 High Level Configuration Page

The High Level Configuration page is used to set the configuration of the AFE88xH1EVM GUI. Figure 3-7 shows the AFE881H1 High Level tab of the High Level Configuration Page. This tab is used to set the DAC controls and calibration, ADC and custom channel sequencer, and HART modem functions for the device. Alarms and status information are also displayed on this tab.

AFE881H1EVM AFE881H1 High Level Tab Figure 3-7 AFE881H1 High Level Tab