SLVUCF6 july   2023

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Requirements
    1. 2.1 Hardware
    2. 2.2 Software
  6. 3TPS65219 Resources Overview
  7. 4EVM Configuration
    1. 4.1 Configuring the USB to I2C Adapter
    2. 4.2 Configuration Headers
    3. 4.3 Test Points
  8. 5NVM Programming
    1. 5.1 TPS65219EVM-SKT default NVM settings
    2. 5.2 NVM programming in Initialize State
    3. 5.3 NVM programming in Initialize State
  9. 6Graphical User Interface (GUI)
    1. 6.1 TPTS65219 EVM Debugging
    2. 6.2 I2C Communication Port and Adapter Debugging
    3. 6.3 Getting Started
      1. 6.3.1 Finding the GUI
      2. 6.3.2 Downloading the Required Software
      3. 6.3.3 Launching the GUI
      4. 6.3.4 Connecting to the EVM
    4. 6.4 Collateral Page
    5. 6.5 Register Map Page
    6. 6.6 NVM Configuration Page
      1. 6.6.1 NVM Fields
      2. 6.6.2 Create / Load a Custom Configuration
    7. 6.7 Sequence Configuration
    8. 6.8 NVM Programming Page
    9. 6.9 Additional Features
  10. 7Schematics, PCB Layouts, and Bill of Materials
    1. 7.1 TPS65219EVM-SKT Schematic
    2. 7.2 TPS65219EVM-SKT PCB Layers
    3. 7.3 TPS65219EVM-RSM Schematic
    4. 7.4 TPS65219EVM-RSM PCB Layers
    5. 7.5 Bill of Materials

4.3 Test Points

The TPS65219EVM-SKT EVM contains 46 test points for various measurements. Trace assignments to the test points are shown in TPS65219 EVM Test Points. For reference, TPS65219 EVM Test Points demonstrates the test point locations on the EVM.

Table 4-5 TPS65219 EVM Test Points
Test Point Number Associated Trace
TP1 EXTPWR
TP2 GND
TP3 GPIO
TP4 GPO1
TP5 TP_PB
TP6 GPO2
TP7 nINT
TP8 nRSTOUT
TP9-20 GND
TP21 MCU3V3
TP22-23 GND
TP27 VDD1P8
TP28 VSEL_SD/VSEL_DDR
TP29 LDO 1 Output
TP30 LDO 2 Output
TP31 Buck 1 Output
TP32 Buck 2 Output
TP33 Buck 3 Output
TP34 MODE/STBY
TP35 LDO 1 Output SENSE
TP36 LDO 2 Output SENSE
TP37 Buck 1 Output SENSE
TP38 Buck 2 Output SENSE
TP39 Buck 3 Output SENSE
TP40 MODE/RESET
TP41 LDO 3 Output
TP42 LDO 4 Output
TP43 LDO 3 Output SENSE
TP44 LDO 4 Output SENSE
TP45 SDA
TP46 SCL
TP47 GND
TP50 USB_5V