SLVUCT1 April   2024 TPSM64406

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 EVM Connections
    2. 2.2 EVM Setup
      1. 2.2.1 Input Connections
      2. 2.2.2 Output Connections
  8. 3Implementation Results
    1. 3.1 Test Equipment
    2. 3.2 Test Data and Performance Curves
      1. 3.2.1 Efficiency and Load Regulation Performance
      2. 3.2.2 Waveforms and Plots
      3. 3.2.3 EMI Performance
      4. 3.2.4 Thermal Performance
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks
  11. 6Related Documentation
    1. 6.1 Supplemental Content
    2. 6.2 Custom Design With WEBENCH Tools

2.2.2 Output Connections

  • Connect voltmeter at VOUTS+ and VOUTS– sense points to measure the output voltage.
  • Connect load to the VOUT+ and VOUT– connections as shown in Figure 3-1. Set the load to constant-resistance mode or constant-current mode at 0A before applying input voltage.