SNIU051 March   2023

 

  1.   Abstract
  2.   Trademarks
  3. 1Introduction
    1. 1.1 Features
    2. 1.2 EVM Kit Contents
  4. 2TMP4718EVM Hardware Overview and Setup
    1. 2.1 Board Connectors and Components
      1. 2.1.1 Programming Header
      2. 2.1.2 Pushbutton Switch
      3. 2.1.3 Status LEDs
      4. 2.1.4 Remote BJT
    2. 2.2 EVM Operating Conditions
  5. 3TMP4718EVM Software Overview
    1. 3.1 Software Download
      1. 3.1.1 Live Software on dev.ti.com
      2. 3.1.2 Offline Software
    2. 3.2 Software Operation
      1. 3.2.1 Home Tab
      2. 3.2.2 Data Capture Tab
      3. 3.2.3 Registers Tab
      4. 3.2.4 Collateral Tab
  6. 4Schematic, Board Layout, and Bill of Materials
    1. 4.1 Schematic
    2. 4.2 Layout
    3. 4.3 Bill of Materials

2 TMP4718EVM Hardware Overview and Setup

This section describes the setup and hardware features present on the TMP4718EVM.

CAUTION:

Many of the components on the TMP4718EVM are susceptible to damage by electrostatic discharge (ESD). Customers are advised to observe proper ESD handling precautions when unpacking and handling the EVM, including the use of a grounded wrist strap at an approved ESD workstation.

GUID-5068903B-9D68-47B7-9435-4D19C219DB99-low.png