SPRAD09A December   2021  – July 2022 DRA821U

 

  1.   Abstract
  2.   Trademarks
  3. 1Hardware and Software Required Stuff
  4. 2DRA821U Boot Mode With Fast Boot Method
  5. 3Detailed Steps
    1. 3.1 Step1: Patch and Build/Copy the u-boot
    2. 3.2 Step2: Optimizations by Switching to xSPI Boot: Copy Bootloaders to xSPI
    3. 3.3 Step 3: Optimize the DTSI by Disabling Nodes not Mandatory for Linux Boot
    4. 3.4 Step 4: Create Bootable SD Card, Switch to TinyFS
    5. 3.5 Step 5: Switch to eMMC Filesystem
    6. 3.6 Step 6: Optimizations With Bootargs
    7. 3.7 Step 7: Hijack the init
  6. 4Debug Commands
    1. 4.1 SF Probe
    2. 4.2 mmcblk
    3. 4.3 How to Check Mounted Devices?
    4. 4.4 How to Check Your Partitions?
    5. 4.5 How to Restore Your Boot Setting?
  7. 5Fast Boot Result Review
  8. 6References
  9. 7Revision History

1 Hardware and Software Required Stuff

  • Hardware:
  • Software
    • J7200XSOMXEVM
    • Linux SDK version: ti-processor-sdk-linux-j7200-evm-08_00_00_05
    • RTOS SDK version: ti-processor-sdk-rtos-j7200-evm-08_00_00_12

Regarding how to build the Linux/RTOS for DRA821U, see the Understanding bootloaders in Processor SDK J7200 (RTOS/Linux) section.

Regarding how to set up the EVM to test, see the Jacinto7 DRA821 Evaluation Module (EVM) User's Guide.