SBASAS7A August   2024  – June 2025 AMC0106M05

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information (DEN Package)
    5. 5.5 Package Characteristics
    6. 5.6 Electrical Characteristics
    7. 5.7 Switching Characteristics
    8. 5.8 Timing Diagrams
    9. 5.9 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Input
      2. 6.3.2 Modulator
      3. 6.3.3 Isolation Channel Signal Transmission
      4. 6.3.4 Digital Output
        1. 6.3.4.1 Output Behavior in Case of a Full-Scale Input
        2. 6.3.4.2 Output Behavior in Case of a Missing High-Side Supply
    4. 6.4 Device Functional Modes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Shunt Resistor Sizing
        2. 7.2.2.2 Input Filter Design
        3. 7.2.2.3 Bitstream Filtering
        4. 7.2.2.4 Designing the Bootstrap Supply
      3. 7.2.3 Application Curve
    3. 7.3 Best Design Practices
    4. 7.4 Power Supply Recommendations
    5. 7.5 Layout
      1. 7.5.1 Layout Guidelines
      2. 7.5.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Documentation Support
      1. 8.1.1 Related Documentation
    2. 8.2 Receiving Notification of Documentation Updates
    3. 8.3 Support Resources
    4. 8.4 Trademarks
    5. 8.5 Electrostatic Discharge Caution
    6. 8.6 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

6.4 Device Functional Modes

The AMC0106M05 operates in one of the following states:

  • OFF-state: The low-side of the device (AVDD) is not supplied. The device is not responsive and DOUT is in high-impedance state. Internally, DOUT is clamped to DVDD and DGND by ESD protection diodes.
  • Missing high-side supply: DVDD is supplied within the Recommended Operating Conditions but VAVDD is below the AVDDUV threshold. The device outputs a constant bitstream of logic 0's as described in the Output Behavior in Case of a Missing High-Side Supply section.
  • Common-mode input violation: AVDD and DVDD are supplied within the respective recommended operating conditions. However, the common-mode input voltage VCM = (VINP + VINN) / 2 is outside the recommended operating conditions. The device outputs invalid data, independent of the differential input voltage VIN.
  • Differential input voltage range violation (full-scale input): VAVDD, VDVDD, and VCM are within the recommended operating conditions. However, the differential input voltage VIN = (VINP – VINN) exceeds the clipping voltage (|VIN| > |VClipping|). The device outputs a fixed pattern as described in the Output Behavior in Case of a Missing High-Side Supply section.
  • Normal operation: VAVDD, VDVDD, VCM, and VIN are within the recommended operating conditions. The device outputs a digital bitstream as explained in the Digital Output section.
Table 6-1 Device Operational Modes
OPERATING CONDITION VDVDD VAVDD VCM
(VINP + VINN) / 2		 VIN
(VINP – VINN)		 DEVICE
RESPONSE
OFF VDVDD < DVDDUV Don't care Don't care Don't care DOUT is in Hi-Z state. DOUT is clamped to DVDD and DGND by ESD protection diodes.
Missing high-side supply Valid(1) VAVDD < AVDDUV Don't care Don't care DOUT is constantly low
Common-mode input voltage range violation Valid(1) Valid(1) VCM < VCM, MIN or VCM > VCM, MAX Don't care Device outputs invalid data
Differential input voltage range violation Valid(1) Valid(1) Valid(1) |VIN| > VClipping Device outputs a single 1 or a single 0 every 128th clock cycle
Normal operation Valid(1) Valid(1) Valid(1) Valid(1) Normal Operation
(1) Valid means within recommended operating conditions.