SLAU151B may   2023  – june 2023 DAC8801 , DAC8811

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Jumper Information
    3. 2.3 Setup
    4. 2.4 Header Information
    5. 2.5 Test Points
  8. 3Software
    1. 3.1 GUI Installation
    2. 3.2 Software Description
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Compliance Information
    1. 5.1 Compliance and Certifications
  11. 6Related Documentation
    1. 6.1 Supplemental Content
  12. 7Revision History

1.4 Device Information

The documents in Table 2-2 provide information regarding Texas Instruments integrated circuits used in the assembly of the DAC8811EVM. This user's guide is available from the TI web site under literature number SLAU151. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. Newer revisions are available from the TI web site at www.ti.com, or call the Texas Instruments Literature Response Center at (800) 477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and literature number.

Table 1-2 Related Device Documentation
Document Literature Number
DAC8811 product data sheet SLAS411
OPA2828 product data sheet SBOS671
REF5025 product data sheet SBOS410
SN74LV4T125 product data sheet SCLS749
TPD1E10B09 product data sheet SLLSEB0
TPS73443-Q1 product data sheet SBVS185