SLAU947 October   2024 MSPM0G3519

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Hardware Overview
    2. 2.2 Power Requirements
    3. 2.3 XDS110 Debug Probe
    4. 2.4 Measure Current Draw of the MSPM0G3519
    5. 2.5 Clocking
    6. 2.6 BoosterPack Plug-in Module Pinout
  9. 3Software
    1. 3.1 Software Development Options
    2. 3.2 Out-of-Box GUI
    3. 3.3 CCS Cloud
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Compliance Information
    1. 5.1 Compliance and Certifications
  12. 6Additional Information
    1. 6.1 Trademarks
  13. 7Related Documentation
    1. 7.1 Supplemental Content

1.4 Device Information

LP-MSPM0G3519 uses the following devices from Texas Instruments.

Table 1-1 Device Information
Device Name Description Purpose

MSP432E401YTPDT

SimpleLink™ 32-bit ARM Cortex-M4F MCU with Ethernet™, CAN, 1MB Flash and 256kB RAM

XDS110 Host Device

MSPM0G3519SPZR

Mixed-Signal Microcontroller with 80MHz Arm Cortex 32-bit-M0+ CPU, 512kB flash, and 128kB SRAM

Evaluation device

MSP430G2452IRSA16R

Mixed-Signal Microcontroller with 16-bit RISC CPU, 8kB Flash, and 256B SRAM

DC/DC controller for EnergyTrace Technology
TPD4E004RSER

ESD-protection array for high-speed data interfaces, 4 channels

Protect LP-MSPM0G3519 from ESD damage through USB connector

TPS73533DRBT

500mA, adjustable, low quiescent current, low-noise, high-PSRR, single-output LDO regulator

3.3V power XDS110 and MSPM0G3519
TPS2102DBVR 2.7V to 4V power mux, dual-input, single-output power switch

Switches XDS110 power