SLLU381A April   2024  – December 2025

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  7. 2Hardware
    1. 2.1  Additional Images
    2. 2.2  Power and Integrated Regulators
    3. 2.3  CAN FD
    4. 2.4  High-Side Switches
    5. 2.5  nRST and LIMP/LSS
    6. 2.6  WAKE/ID Function
    7. 2.7  Digital Interface
    8. 2.8  Header Information
      1. 2.8.1 WAKE/ID Headers
      2. 2.8.2 Other Control Headers
    9. 2.9  Push Buttons
    10. 2.10 Switches
  8. 3Hardware Design Files
    1. 3.1 Schematics
  9. 4Additional Information
    1. 4.1 Trademarks
  10. 5References
  11. 6Revision History

2.9 Push Buttons

There are five buttons on the EVM which allow for triggering different functions.

Table 2-4 Push Button Functions
Button Function
PB1

Trigger a GND pulse on WAKE1/ID1. Do not press if J1 is connected in VSUP configuration.
PB2 Trigger a GND pulse on WAKE2/ID2. Do not press if J2 is connected in VSUP configuration.
PB3 Trigger a GND pulse on WAKE3/ID3. Do not press if J3 is connected in "VSUP configuration.
PB4 Trigger a GND pulse on WAKE4/ID4. Do not press if J4 is connected in VSUP configuration.
PB5 Trigger a GND pulse on nRST.