SLUUCB5E June   2020  – July 2022 BQ25792 , BQ25798

 

  1.   BQ25792EVM, BQ25798BKUPEVM and BQ25798EVM (BMS034) Evaluation Module
  2. 1Introduction
    1. 1.1 EVM Features
    2. 1.2 I/O Descriptions
    3. 1.3 Recommended Operating Conditions
  3. 2Test Setup and Results
    1. 2.1 Equipment
    2. 2.2 Equipment Setup
    3. 2.3 Software Setup
      1. 2.3.1 BQSTUDIO using EV2400
      2. 2.3.2 TI Charger GUI for USB2ANY
    4. 2.4 Test Procedure
      1. 2.4.1 Initial Settings
      2. 2.4.2 Communication Verification
      3. 2.4.3 Charge Mode Verification
      4. 2.4.4 OTG Mode Verification
  4. 3PCB Layout Guidelines
  5. 4Board Layout, Schematic and Bill of Materials
    1. 4.1 BMS034 Board Layout
    2. 4.2 BQ2579XEVM (BMS034) Schematics
    3. 4.3 Bill of Materials
  6. 5Revision History

4.2 BQ2579XEVM (BMS034) Schematics

Figure 4-5, Figure 4-6, and Figure 4-7 illustrate the schematics for the BQ2579XEVM.

GUID-20220620-SS0I-4CLP-WMN6-QC7BLGPN7BSV-low.gif Figure 4-5 BQ25792EVM (BMS034A/B-001) and BQ25798EVM (BMS034A/B-003) Schematic Page 1
GUID-B03F0AC2-734C-45AA-8291-DBD88860747F-low.gif Figure 4-6 BQ25792EVM (BMS034A/B-001), BQ25798BKUPEVM (BMS034A/B-005) and BQ25798EVM (BMS034A/B-003) Schematic Page 2
GUID-20220620-SS0I-983D-TLQK-ST0GWVGJP38T-low.gif Figure 4-7 BQ25798BKUPEVM (BMS034A/B-002) Schematic Page 1