SLVSH94 May   2026 TPS26742-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Recommended Capacitance
    6. 6.6  Power Supply Characteristics
    7. 6.7  Power Consumption Characteristics
    8. 6.8  Power Path Supervisory Characteristics
    9. 6.9  CC Cable Detection Characteristics
    10. 6.10 Legacy Charging Characteristics
    11. 6.11 Px_VCONN Switch Characteristics
    12. 6.12 CC PHY Characteristics
    13. 6.13 Thermal Shutdown Characteristics
    14. 6.14 Oscillator Characteristics
    15. 6.15 ADC Characteristics
    16. 6.16 Liquid Detection Characteristics
    17. 6.17 Input/Output (I/O) Characteristics (P0_GPIOx)
    18. 6.18 Input/Output (I/O) Characteristics (P1_GPOx)
    19. 6.19 I2C Requirements and Characteristics
    20. 6.20 UART
    21. 6.21 SYNC output
    22. 6.22 PWM Timer
    23. 6.23 Flash Memory Characteristics
    24. 6.24 Boot Timing
    25. 6.25 Typical Characteristics
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Power Supply
        1. 8.3.1.1 Power-On and Supervisory Functions
      2. 8.3.2  Cable Plug and Orientation Detection
        1. 8.3.2.1 Configured as a Source
      3. 8.3.3  VCONN Power Path
        1. 8.3.3.1 Current Clamp
        2. 8.3.3.2 Px_VCONN Local Overtemperature Shut Down (OTSD)
        3. 8.3.3.3 Px_VCONN OVP
        4. 8.3.3.4 Px_VCONN UVLO
        5. 8.3.3.5 Px_VCONN RCP
      4. 8.3.4  USB-PD Physical Layer
        1. 8.3.4.1 USB-PD Encoding and Signaling
        2. 8.3.4.2 USB-PD Bi-Phase Marked Coding
        3. 8.3.4.3 USB-PD BMC Transmitter
        4. 8.3.4.4 USB-PD BMC Receiver
        5. 8.3.4.5 Squelch Receiver
      5. 8.3.5  DBG_SDA, DBG_SCL and DP/DM Overview
        1. 8.3.5.1 Closed Chassis Debugging and Updating Flash
          1. 8.3.5.1.1 I2C4 Access For Closed-chassis Debugging
          2. 8.3.5.1.2 UART Access for Closed-chassis Debugging
        2. 8.3.5.2 BC1.2 and Legacy Charging Functionality
          1. 8.3.5.2.1 Charging Downstream Port (CDP) Mode
          2. 8.3.5.2.2 Dedicated Charging Port (DCP) Mode
      6. 8.3.6  Liquid Detection
      7. 8.3.7  Local Interconnect Network (LIN) Support
      8. 8.3.8  Thermal Shutdown
      9. 8.3.9  ADC
        1. 8.3.9.1 ADC Divider Ratios
      10. 8.3.10 VIN Power Foldback
      11. 8.3.11 Thermal Foldback
      12. 8.3.12 DisplayPort Hot-Plug Detect (HPD)
      13. 8.3.13 General GPIO
        1. 8.3.13.1 P0_GPIOx
        2. 8.3.13.2 P1_GPOx
      14. 8.3.14 ENSD Functionality
      15. 8.3.15 Px_SYNC Output
      16. 8.3.16 Pulse-Width Modulation (PWM) Output
      17. 8.3.17 I2C Interface
        1. 8.3.17.1 I2C Interface Hardware
        2. 8.3.17.2 I2C Interface Description
        3. 8.3.17.3 I2C Clock Stretching
        4. 8.3.17.4 Unique Address Interface
        5. 8.3.17.5 I2C Address Setting
      18. 8.3.18 System Power Management (SPM) Across Ports
    4. 8.4 Device Functional Modes
      1. 8.4.1 Pin Strapping to Configure Default Behavior (CONFIG)
      2. 8.4.2 Power States
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
        1. 9.2.1.1 CC Pin Recommendations
        2. 9.2.1.2 TI Firmware Update (TFU)
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 System Examples
      1. 9.3.1 Dual-Port SPR Charger
    4. 9.4 Power Supply Recommendations
      1. 9.4.1 Input Power Supply
      2. 9.4.2 5V Power Supply
      3. 9.4.3 3.3V Power Supply
      4. 9.4.4 1.35V Power Supply
    5. 9.5 Layout
      1. 9.5.1 Layout Guidelines
      2. 9.5.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Receiving Notification of Documentation Updates
    3. 10.3 Support Resources
    4. 10.4 Trademarks
    5. 10.5 Electrostatic Discharge Caution
    6. 10.6 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

1 Features

  • AEC-Q100 test guidance with the following:
    • Device temperature grade 1: -40oC to 125oC ambient operating temperature range
    • Device HBM ESD classification level:
      • Level 2 and level 3A
    • Device CDM ESD classification level:
      • Level C2a and C2b
  • TPS26742-Q1 is a fully configurable dual-port PD3.2 source controller.
    • 40V tolerant VBUS
    • 24V tolerant CC and DP/DM pins
    • GUI tool to easily configure for various applications
    • Programmable power supply (PPS) support (source)
  • USB Type-C power delivery (PD) controller
    • USB PD R3.2 compliant
    • USB Type-C R2.4 compliant
    • 20 configurable GPIOs
    • Cable attach and orientation detection
    • Integrated VCONN switch. No external supply required to read eMarker
    • Physical layer and policy engine
    • Integrated LDO with input up to 40V
    • One I2C controller port (I2C2)
    • Two I2C target ports (I2C1, I2C3)
    • UART and LIN support
    • Closed-chassis debugging
  • Integrated flash memory supporting updates via I2C gated by an authentication check
    • Closed-chassis flash updates via I2C4
  • System power management
    • Across multiple ports and multiple devices
    • Thermal foldback
    • Power foldback
  • Liquid detection and corrosion mitigation