SLVSL58 September   2026

ADVANCE INFORMATION  

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
    5. 1.5 Getting Started with the ADS111C04EVM
  8. 2Hardware
    1. 2.1 ADS111C04EVM and ADS111C02EVM
      1. 2.1.1 Power Supplies (ADS111C02EVM and ADS111C04EVM)
      2. 2.1.2 Serial Interface (ADS111C02EVM and ADS111C04EVM)
        1. 2.1.2.1 Digital Signal Connections (ADS111C02EVM and ADS111C04EVM)
        2. 2.1.2.2 Level Translator (ADS111C02EVM and ADS111C04EVM)
      3. 2.1.3 ADS111C04EVM
        1. 2.1.3.1 ADC Connections and Decoupling (ADS111C04EVM)
        2. 2.1.3.2 Analog Inputs (ADS111C04EVM)
      4. 2.1.4 ADS111C02EVM
        1. 2.1.4.1 ADC Connections and Decoupling (ADS111C02EVM)
        2. 2.1.4.2 Analog Inputs (ADS111C02EVM)
    2. 2.2 ADS111S04EVM and ADS111S02EVM
      1. 2.2.1 Power Supplies (ADS111S02EVM and ADS111S04EVM)
      2. 2.2.2 Serial Interface (ADS111S02EVM and ADS111S04EVM)
        1. 2.2.2.1 Digital Signal Connections (ADS111S02EVM and ADS111S04EVM)
        2. 2.2.2.2 Level Translator (ADS111S02EVM and ADS111S04EVM)
      3. 2.2.3 ADS111S04EVM
        1. 2.2.3.1 ADC Connections and Decoupling (ADS111S04EVM)
        2. 2.2.3.2 Analog Inputs (ADS111S04EVM)
      4. 2.2.4 ADS111S02EVM
        1. 2.2.4.1 ADC Connections and Decoupling (ADS111S02EVM)
        2. 2.2.4.2 Analog Inputs (ADS111S02EVM)
  9. 3Software
    1. 3.1 Software Description
  10. 4Hardware Design Files
    1. 4.1 Schematics (ADS111C04EVM)
    2. 4.2 Schematics (ADS111C02EVM)
    3. 4.3 Schematics (ADS111S04EVM)
    4. 4.4 Schematics (ADS111S02EVM)
    5. 4.5 Schematics (EVM Hardware)
    6. 4.6 PCB Layouts
    7. 4.7 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks

1.5 Getting Started with the ADS111C04EVM

The following steps provide an overview to quickly get the ADS111C04EVM setup and operational. The subsequent sections in this document expand on each step to explain in detail the available features on the ADS111C04EVM. Links below are provided to navigate from this quick start guide to the appropriate section at each step, where applicable:

  1. Remove the ADS111C04EVM and female-to-female jumper wire set from the ADS111C04EVM box.
  2. Download example code from the Precision ADC GitHub.
  3. Connect the female-to-female jumper wires to the TI LaunchPad and to EVM digital pins:
    1. Digital Signal Connections (ADS111C02EVM and ADS111C04EVM)
    2. Digital Signal Connections (ADS111S02EVM and ADS111S04EVM)
  4. Connect sensors or signals to the input terminal pins:
    1. Analog Inputs (ADS111C04EVM)
    2. Analog Inputs (ADS111C02EVM)
    3. Analog Inputs (ADS111S04EVM)
    4. Analog Inputs (ADS111S02EVM)
  5. Configure internal register values using example code
  6. Visit the E2E forums for support and questions.