SLVT238 February   2026

 

  1.   1
  2.   Description
  3.   Resources
  4.   Features
  5.   Applications
  6.   6
  7. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Dimensions
  8. 2Testing and Results
    1. 2.1 System Efficiency Graphs
    2. 2.2 System Efficiency Data
    3. 2.3 Charge Efficiency Graphs
    4. 2.4 Charging Efficiency Data
    5. 2.5 Thermal Images
      1. 2.5.1 140W Input, 16V System Voltage
      2. 2.5.2 180W Input, 9V System Voltage
      3. 2.5.3 210W Input, 12.3V System Voltage
      4. 2.5.4 220W Input, 14V System Voltage
      5. 2.5.5 240W Input, 17.6V System Voltage
  9. 3Waveforms
    1. 3.1 Typical Charging Waveforms
    2. 3.2 Start-up and Shutdown
    3. 3.3 Charge Enable and Disable
    4. 3.4 System Transients
    5. 3.5 Typical OTG Waveforms
    6. 3.6 OTG Transients
  10.   Trademarks

3.4 System Transients

Load transient response is shown in Figure 3-7. The input voltage was 20V, the system voltage was 12.3V, and the system current was stepped between 0A and 10A.

PMP23637 System Transient Waveforms Figure 3-7 System Transient Waveforms