SLVUCU3 July   2025

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Connector Descriptions
      2. 2.1.2 Hardware Setup
    2. 2.2 Warnings and Caution
  7. 3Implementation Results
    1. 3.1 TPS62893EVM-012 Test Results
    2. 3.2 Modifications
      1. 3.2.1 Input and Output Capacitors
      2. 3.2.2 Output Voltage Setting
      3. 3.2.3 Control Loop Compensation
      4. 3.2.4 I2C Interface
  8. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks

PCB Layout

This section provides the TPS62893EVM-012 board layout. The Gerber files are available on the TPS62893EVM-012 tool page.

TPS62893EVM-012 Top Layer - ComponentsFigure 4-2 Top Layer - Components
TPS62893EVM-012 Layer 2Figure 4-4 Layer 2
TPS62893EVM-012 Layer 4Figure 4-6 Layer 4
TPS62893EVM-012 Layer 6Figure 4-8 Layer 6
TPS62893EVM-012 Bottom LayerFigure 4-10 Bottom Layer
TPS62893EVM-012 Top LayerFigure 4-3 Top Layer
TPS62893EVM-012 Layer 3Figure 4-5 Layer 3
TPS62893EVM-012 Layer 5Figure 4-7 Layer 5
TPS62893EVM-012 Layer 7Figure 4-9 Layer 7